Robodo – Arduino RFID learning kit V4 with Instruction CD & Uno R3
Features:
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming.
- A variety of components are included in this pack to try out different projects.
Robodo – Arduino RFID learning kit V5 with Instruction CD & Uno SMD
Features:
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming.
- A variety of components are included in this pack to try out different projects.
Robodo – Basic Starter Kit for arduino Starter with UNO R3
Features:
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G.
RPI Transparent case
Features
- This simple case provides tough protection for your raspberry pi along with access to ports
- High Quality two-piece injection-molded ABS enclosure
- Click together design, no screws, standoffs or elastic bands required
- It is easy to use. You just need to click them together after you fix your pi board on it with screws.
- 4 x Non-slip Silicone Gaskets provided, which can be stuck to the bottom four corners of the box, to prevent it from slipping when placed on a surface.
RS232 TO RS485 Convertor
Features
- Transmission distance: 1.2 mile (RS-485), 5 meters(RS-232)
- Transmission Speed: 300-115200 bps
- Working Modes: Asynchronous, half-duplex, differential transmission
- Transmission Media: Common wire, doule wire, UTP or Shielding Line
- Work Environment: -10°C to 85°C
RS37 10 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 10 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 100 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 100 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 200 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 200 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 30 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 30 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 300 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 300 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 500 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 500 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 60 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 60 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS50 10 rpm
Features
| Voltage | 12 V |
| Power Source | DC |
| Model Name/Number | 10 RPM RS-50 High Torque Side Shaft DC |
| Brand | Probots |
| Material | Metal |
| Speed | 10 RPM |
| Motor Type | DC |
RS50 200 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 200 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
RS50 30 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 30 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
RS50 300 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 300 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
RS50 60 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 60 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
SC10UU Linear Slide / Motion Bearing / Block
Features
- Product Name: Linear Bearing
- Model: SC10UU
- Material: Metal, Rubber
- ID: 10mm.
SC16UU SCS16UU 16mm Linear Ball Bearing
Features:
- Model: SC16LUU
- Ball Circuit: 4
- Inner Diameter (mm): 16
- Length (mm): 85
- Outer Casing: Chromium Steel
- Linear bearing ball cage, hardened coat of both ends ring.
- Safe and reliable operation.
SC8UU Linear Slide block
An SC8UU 8mm Linear Ball Bearing Slide Unit CNC 3D Printer for use on hardened steel shafts. Ideal for small CNC applications as well as X / Y tables. The universal Ball Bearings is great for you to replace the damaged Ball Bearings in your devices to improve the efficiency and save energy.
Widely used in home appliances, industrial, low noise and high-speed electric motors, construction machinery, automotive components, pumps, and machinery. Smooth moving, low friction, high rigidity, and long life. Economical, easy to maintain replace.
SEN-HZ21WI DN15 1/2 Copper Water Flow Sensor Output Flow Sensor Switch
Features:-
- Model: SEN-HZ21WI
- Material: Copper
- Colour: Gold
- Type: 1/2(External Thread Diameter)
- Water quality requirement: ≤60℃
- Flow range: 1-30L/min
- Maximum water pressure: 1.75MPa
- Three-wire connection: Red for positive pole, black for negative pole, yellow for pulse signal
- Lightweight, reasonable size, stable performance, low water pressure start, easy to install, safe to use
- Weight: approx. 95g.
SEN-PPI150 PP vertical magnetic water level switch liquid level switch float level switch
Features:-
- Model Number: SEN-PPI150.
- Rated voltage: Below DC24V.
- Installation method: vertical.
- 10W, normally open type.
- Float Ball diameter 24mm
- Fixed Screw M10.
- Switch response time: 0.2ms.
- Colour: white colour.
- Material: Plastic PP.
SEN-PPI35 PP Aquarium Liquid Water Level Sensor Float Switches Normally Open
Features:-
- Model: SEN-PPI35
- Thread: M10
- working current: 0.5A
- Contact Resistance: 0.2Ω
- Wiring Type: 2 wire output
- Working Voltage: DC 110V
- Contact form: NO (Normally Open)
- Temperature: -20℃-80℃
- Material: plastic
- Switch Length: 61mm/2.1inch
- Cable Length: 340mm/13.4inch.
Serial TO TTL MAX3232
Features
- IC Chip: MAX3232
- Operating Voltage: 3.3-5.5V
- It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
- Pre-assembled compact size board
- Suitable for use with most microcontrollers
- Operates up to 250 kbit/s
Servo bracket PT pan/till camera platform anti-vibration camera mount
Features:
- Supported Motors: 10kg-cm servos (such as MG995, MG996)
- No of Axis: 2 axis
- Weight : 51.2gms
- No of Metallic Pieces: 2
- This product is made of high-quality materials and is durable.
- Various sensors can be installed to complete a variety of novel interactive works through the servo controller.
- It is convenient to install the camera, which can realize image monitoring and image recognition and tracking.
Servo Motor Tester
Features
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
SG 90
Features
- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm.
SG5010
Features
- Model: SG5010
- Weight: 39 gm
- Operating voltage: 4.8V~ 6V
- Servo Plug: JR
- Stall torque @4.8V : 5.5kg-cm
- Stall torque @6.6V : 6.5kg-cm.
SG90 Servo Motor Bracket SG90 9g Bracket Support
Features:
- Material: Mild Steel(MS)
- Weight: 5 gm (each)
- Length: 35 mm
- Width: 37 mm
- Thickness: 2.7 mm.
SIM 800C Quadband GSM GPRS Module
Features:
- Supply Voltage (V): 3.4 ~ 12
- GSM (MHz): 850, 900, 1800 and 1900
- Flash Memory (MB): 24
- RAM Memory (MB): 32.
SIM28 GPS Module / Modem with GPS antenna
Feature
- 6-channels GPS search engine
- Ultra low power design (38mA, typical)
- Compact size
- Built-in low noise, high gain active antenna
- Super-cohesive magnetic for installation
- High sensitivity (up to -152dBm typ)
- Apply to host devices with USB or RS232.
SIM28 GPS Module Modem with GPS antenna
Features:
- Operating voltage: 12V DC.
- Frequency l1, 1575.42mhz
- C/a code 1.023mhz chip rate
- 16-channels GPS search engine
- Ultra-low-power design (38mA, typical)
- Compact size
- Built-in low noise, high gain active antenna
- Super-cohesive magnetic for installation
- High sensitivity (up to -152dBm type)
- Super-cohesive magnetic for installation
- Apply to host devices with USB or RS232
- Compatible with TTL serial.
SIM800A Quadband GSM / GPRS Module convertible as Shield for Arduino
Features
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
SIM800L GPRS GSM Module
Features:
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
SIM900 GPRS/GSM Shield Development Board Quad-Band Module For Arduino Compatible
Features:-
- Quad-Band 850 / 900/ 1800 / 1900 MHz – would work on GSM networks in all countries across the world.
- Control via AT commands – Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
- Short Message Service – so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
- Embedded TCP/UDP stack – allows you to upload data to a web server.
- Industrial Temperature Range – -40°C to +85 °C.