N20 Gear motor RPM – 100
Features
- Voltage range:3-6V
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
N20 Gear motor RPM – 40
Features
| Model No. | N20-6V-400 |
| No Load Current (mA) | 0.04 A |
| Stall Current (A) | 0.67 |
| Stall Torque(Kg-Cm) | 0.65 |
| Rated Torque(kg-cm) | 0.18 |
| Motor Body Size (Diameter) (mm) | 12 |
| Operating Voltage (VDC) | 3 ~ 6 |
| Rated Operating Voltage (VDC) | 6 |
| No load Speed (RPM) | 400 |
N20 Gear motor RPM – 500
Features
| Model No. | N20-3V-500 |
| Motor Type | Center Shaft DC Geared Motor |
| Rated Operating Voltage (VDC) | 3 |
| No Load Current (mA) | 0.01 |
| Stall Current (A) | 0.1 |
| Rated Speed (RPM) | 400 |
| Operating Voltage (VDC) | 1.5 ~ 5 |
| Rated Torque(kg-cm) | 0.05 |
| Stall Torque(Kg-Cm) | 0.4 |
| No load Speed (RPM) | 500 |
NANO / UNO Multi-Purpose Expansion Board
Features
- Compatible with Arduino NANO.
- All digital and analog pins breakout.
- Compact size.
- External power supply current support.
- Leads all pins out, convenient for wiring and doing experiments.
Nano V3 Ethernet Shield
Features
- ENC28J60 Ethernet chips, SOP28 package
- SPI Interface
- 1×10 connector, can be easily mounted with the MCU
- Built-in isolation transformer RJ45 connectors HR911105A
- Power LED
- Single Supply: +3.3 V
- 25Mhz Crystal
- PCB size: 48×18 mm
NE555 Pulse Module
Features
- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
NEMA 17 1.6 kgcm
Features
- Model : NEMA 17
- Motor Part Number : JK42HS34-0316
- Motor Type : Single Shaft
- Step Angle : 1.8°
- Holding Torque : 1.6 kg-cm
- Operating Voltage : 12~16 V
- Supply Current (A) : 0.31 A/Phase
- No. of Leads : 6
- Inductance : 21 mH/Phase
- Resistance : 38.5 O/Phase
- Rotor Inertia : 34 gm-cm
- Weight (gm) : 220
- Frame Size (mm) : 42 x 42
- Shaft Diameter (mm) : 5
- Shaft Length (mm) : 20.
NEMA 17 4.2 kgcm PR17
The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The NEMA17 4.2 kg-cm Stepper Motor can provide 4.2 kg-cm of torque at 1.2A current per phase.
The motor’s position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The NEMA17 4.2 kg-cm Stepper Motor provides excellent response to starting, stopping and reversing pulses from stepper motor driver.
They are very useful in the various application, especially which demands low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.
It is a brushless DC motor, so the life of this motor is dependent upon life of the bearings. The position control is achieved by a simple Open Loop control mechanism so doesn’t require complex electronic control circuitry.
It comes with a detachable 70cm cable which makes wiring and rewiring very fast and easy work. The design of this cable is such that it can directly be mounted on a stepper motor controller. So, playing with the connection is done with just snap of fingers.
The motor’s shaft has been machined for good grip with a pulley, drive gear etc., and especially avoiding stall or slip.
We are engaged in supplying and wholesaling a quality approved collection of the Stepper Motors which are highly acknowledged and accepted for long service life and high reliability. To explore more of them click below,
Note :
- The Nema17 4.2kgcm Stepper motor dimensions and weight may have ±2% error.
- Resonances can occur because of improper installment.
- Not easy to operate at extremely high speeds.
NEMA 17 5.5 kgcm
Features
- Step Angle: 1.8°.
- Current: 1.5 A /Phase.
- Holding Torque: 5.5 kg-cm.
- Detent Torque: 2.6 kg-cm
- Weight – 360 gm.
NEMA 23 10.1 kg-cm
Features
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
NEMA 23 18.9 kg-cm
Features
- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 189 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm.
NEMA 23 7.2 kg-cm
Features
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 51
- Current/Phase A: 1
- No of Leads: No. 6
- Shaft type: Round.
NEMA 34 34 kg-cm
Features
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 67
- Current/Phase A: 5.9
- No of Leads: No. 4
- Shaft type: Keyway Type.
NEMA17 Stepper L Clamp
Features
- Motor Type: NEMA17
- Material: Mild Steel(MS).
- Dimensions: 50x48x44 (LxWxH) mm
- Mounting Holes Size: 4mm
- Weight: 73 gm.
Nema17 Stepper Motor With Stainless Steel 8mm 300mm Lead Screw + T8 Nut For 3D Printer CNC Machine
Features:-
- Current / Phase: 1.5A
- Step Angle(degrees): 1.8
- Phase: 2
- Type: Hybrid
- Certification: ROHS,CE
- Holding Torque: 4.2 KGCM
- Step angle accuracy: + – 5%(full step, not load)
- Resistance accuracy: + – 10%
- Inductance accuracy: + – 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature: -20deg ~+50deg
- Insulation resistance:100M Min,500VDC
- Insulation Strength: 500VAC for one minute
- (Lead Screw).
NODMCU Esp8266-12 USB CH340
Feature
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Power input: 4.5V to 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Integrated TCP/IP protocol stack
- Use CH340G to replace the CP2102.
NODMCU Esp8266-12 USB CP2102
Features
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor.
NOKIA 5110
Features
- Support different types of MCU, such as the Arduino, AVR, SPI, MCS51, and so on.
- Transfer rate up to 4Mbps, can full speed write display data without waiting time.
- LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small.
- Need you to compress the screen and PCB tighter, might be got loose after the delivery.
- Use a 3.3V controller, otherwise, the display could be quite vague.
Non Unite 250W MY1016 24v Motor
Features
| Model | MY1016 |
| Operating Power | 250 W |
| Operating voltage (V DC) | 24 |
| Rated Current (A) | ≤ 13.7A |
| Rated Speed (RPM) | 2650 +/- 5 % |
| Rated Torque (N-m) | 0.87 Nm |
| No load Current (A) | 0.7 – 1.4 A |
| Transmission | Chain sprocket (11 teeth, pitch 1/4″=6,35 mm) |
| Weight(g) | 1900 |
Non Unite 350W MY1016 24V Motor
Features
| Model | MY1016 350W |
| Operating Power | 350W |
| Operating Voltage | 24V DC. |
| Rated Current(A) | Full load Current: ≤18.7A, No load Current: ≤2.5A. |
| No load Speed | 3300 RPM |
| Rated Speed(RPM) | 2750 RPM. |
| Rated Torque | 1.5 N.m (15.0 kg.cm). |
| Stall Torque(Kg-Cm) | 5.25 N.m (52.50 kg.cm). |
| Weight (Kg) | 2.56 |
| Efficiency | ≥78%. |
Non Unite 500W MY1020 24V Motor
Features
- Supply Voltage: 24v.
- Current Draw (Rated): 27.4A.
- Current Draw (No Load): 2.5A.
- Rated (constant) Torque: 190 N-cm.
- Speed: 2500 RPM.
- Efficiency: Greater than 75%.
- Weight: 4.10 Kg
NRF24L01
Feature
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications.
NRF24L01 Long Range
Feature
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port.
Offside 100 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 100 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 200 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 200 RPM (at 12V) |
| Shaft length (mm) | 16 |
offside 24v 10 rpm
Features
- Output RPM: 10 rpm
- Stall Torque: 18 Kg/cm
- Stall Current: 750 – 800 ma
- Motor body Length: 75mm
- Motor Body Diameter:35mm
- Material: Cast Iron
- Shaft diameter: 6mm
- Working Voltage: 12V
offside 24v 30 rpm
Features
- Voltage ? 18v-30v
- RPM – 30 (at 24v)
- Nominal Voltage – 24v
- No- Load Current – 35mA
- Full Load Current – 800mA
- Full (Stall) Load Torque – 20 kgcm
offside 24v 75 rpm
Features
- Voltage – 18v-30v
- RPM – 75 (at 24v)
- Nominal Voltage – 24v
- No- Load Current – 35mA
- Full Load Current – 800mA
- Full (Stall) Load Torque – 10 kgcm
Offside 30 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 30 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 300 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 300 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 5 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 5 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 60 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 60 RPM (at 12V) |
| Shaft length (mm) | 16 |
Optical Endstop Switch
This fully assembled plug and play Optical Endstop Light Control Limit Optical Switch is very suitable for your 3D printing or CNC project. The Optical Endstop Switch will immediately output the digital control when the light is blocked and turn the LED on.
The optical end-stop is a reliable end-stop / switch solution for any type of 3D printers and other CNC and 3D tools. Using optical transmission principle designed, no loss, no noise, and longer service life reached more than one hundred thousand times.
Orange ABS+ 1.75mm 3D Printing Filament 1kg
High Durability
Flexible
Higher Temperature Resistance
Prints smoother & smoother printed objects
Tougher and stronger
Less warping (about 0.4% compared to over 8% in regular ABS)
Orange ABS+ 1.75mm 3D Printing Filament 1kg
Material: The filament is made of Acrylonitrile Butadiene Styrene (ABS+), which is a common thermoplastic polymer used in a wide range of applications.
Diameter: The filament has a diameter of 1.75mm, which is a common size for 3D printing filaments.
Weight: The filament comes in a 1kg spool, which is a standard weight for 3D printing filaments.
Orange eABS – 1.75mm 3D Printing Filament 1kg
The appearance is White, non-transparent.
Non-toxic, tough, hard texture, with good temperature tolerance and creep resistance.
Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.