TEC1-12705
Features
- Model number: TEC1-12705
- Operating Voltage: 12V
- Maximum Voltage- Umax (V) : 15V
- Maximum Current- Imax (A) : 5.2A
- Maximum Power : 54 W
- Power Cord: 25cm
16/2 White
Features
- Color of display : Blue
- Color of character : White
- Size : 16 x 2 (16 character x 2 rows)
- Input voltage : +5V
- Supply current : 1.5mA
- Board dimensions : 80mm x 36mm (LxB)
- Display dimensions : 65mm x 14mm (LxB)
ESP8266 ESP – 07
Feature
- The smallest 802.11b/g/n Wi-Fi SOC module
- Up to 160MHz clock speed
- Built-in 10 bit high precision ADC
- Supports UART/GPIO/IIC/PWM/ADC
- Integrated Wi-Fi MAC/BB/RF/PA/LNA.
ESP8266 WIFI Shield
Features
- Open source IoT Platform
- Easily Programmable
- Low cost & Simple to Implement
- WI-FI enabled
MG995 Servo Motor (180 degree)
Features
- Model: MG995
- Weight: 55 gm
- Operating voltage: 4.8V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 13kg-cm
- Stall torque @6.6V : 15kg-cm
Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module Fully Compatible With ESP8266
Features:-
- Model: ESP8285 ESP-M3
- 32-bit Tensilica L106 microcontroller
- Ultra-low 16 bit RISC
- Fully Compatible with ESP8266
- Embedded TCP protocol
- channel high-precision 10-bit ADC
- Supporting the most commonly used networks (802.11 b / g / n)
- Support WPA, PA2PSK and WPS
- Working temperature: -40 ℃ – + 125 ℃
- Clock Speed: 80 MHz; (max 160 MHz)
- Flash memory: 1 MB.
SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150°C Peltier Module
Features:-
- Small and lightweight, convenient for use.
- Designed specifically for power generation.
- Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
- High-temperature 120°C, with NM static protection.
- Operating Temperature: 0-120°C
- Maximum Temperature: 120°C
- Open Circuit Voltage: 4.8V.
NOKIA 5110
Features
- Support different types of MCU, such as the Arduino, AVR, SPI, MCS51, and so on.
- Transfer rate up to 4Mbps, can full speed write display data without waiting time.
- LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small.
- Need you to compress the screen and PCB tighter, might be got loose after the delivery.
- Use a 3.3V controller, otherwise, the display could be quite vague.
SG5010
Features
- Model: SG5010
- Weight: 39 gm
- Operating voltage: 4.8V~ 6V
- Servo Plug: JR
- Stall torque @4.8V : 5.5kg-cm
- Stall torque @6.6V : 6.5kg-cm.
DC 12V Pneumatic Diaphragm Water Pump Motor R365
Features:-
- Model: R365 DC micro diaphragm pump
- Working voltage: DC 12V
- No load current: 0.23A
- Maximum flow: 2-3 liters/minute
- Outlet maximum pressure: 1-2.5 kg
- Maximum lift: 1-2.5 meters
- Maximum suction: 2 meters
- Motor length: 32mm
- Motor diameter: 28mm
- Pump length: 36mm
- Total length: 69mm
- Pump diameter: 40mm x 35mm
- Weight: 111 g Approx.
DS3231 RTC Module
Features
- 1 Hz output pin SQW.
- 32 KHz output pin 32K.
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- Date Format: YY-MM-DD-dd.
- DS 3231 based RTC with 2032 Battery Holder.
Landing Gear
Features
- Color: black
- Material: ABS Plastic
- Length: 200mm
- Ground Clearance: 150 mm
- Compatibility: Q450 and S500 Frames
- Weight: 75 (each landing gear)
16/2BLUE LCD Shield
Features
- Blue Backlight with white words
- uses 4 Bit Arduino LCD Library
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
- Operating Voltage is 5V
XBEE Shield
Features
- Stackable design, easy to plug into the ARDUINO development board.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB 2.0 protocol.
- Bitbang mode ready.
- Easily connected to a PC via mini USB Cable.
- XBee-setting support software X-CTU.
Water Float Sensor Black
Features
No electrical contact with water.
Shock proof
Corrosion free and rust free
Sensor with 1.5 meter cable
Pushrod (4 Pcs) For Linkage Connector
Pushrod ( 4 Pcs ) 50CM Each.
Thickness – 1.3mm
Length – 50cm (each)
USB Programmer CH341A Series Burner Chip 24 Eeprom Bios Writer 25 SPI Flash BoardUSB Programmer CH341A Series Burner Chip 24 Eeprom Bios Writer 25 SPI Flash Board
Features:-
- USB interface
- With CH341A chip
- Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
- With 24/25 status indicator lamp
- Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip
- Recognize 25 series chip automatically
- Supports download STC series procedure of single chip
- SPI pin to support expanding the utility
- STC microcontroller supports a full range of program download
- Support expanding the utility by SPI pin
- With SOP8 SOP16 to DIP8 converter board.
24V Dc 1/2″ Brass Electric Solenoid Valve Water Air Fuels Gas Normal Closed New
Features
- Rated Operating Voltage: 24V DC
- Rated Current: 0.6A
- Operation Mode: NC (Normally Closed)
- Pressure: 0.02 – 0.8MPa
- Max fluid temperature: 100°C.
6pin 128X64 OLED 0.96″-Yellow Blue
Features
| Driver IC | SSD1306 |
| Low power consumption | 0.04W |
| voltage | 3.3V-5V DC |
| Working temperature | -30-80 degrees |
| Communication | IIC |
| Dimension(cm) | 2.7 cm x 2.7 cm x 0.41 cm |
5 Channel Tracking Sensor Module Board Trace Module Infrared Detection
Features:
- Input voltage: 3.0 V – 5.5 V
- Output form: digital output (high and low level)
- Detection distance: 0 – 4 cm (black and white line sensors)
- 0 – 5 cm (adjustable distance detection).
LIPO Voltage Battery Tester
Features
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
Dc 4.5-40v to 5v 2a USB charger dc-dc step-down buck converter voltmeter
Features:
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
Ina219 I2C BiDirectional Dc Current Power Supply Sensor Breakout Module
Features
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
MG90
Features
- Dimensions: 23 x 12.2 x 29mm
- Operating Speed (4.8V no load): 0.11sec / 60 degrees
- Operating Speed (6.0V no load): 0.10sec / 60 degrees
- Stall Torque (4.8V): 2.0 kg/cm
- Stall Torque (6.0V): 2.5 kg/cm
- Temperature Range: 0 to 55 degree C
- Rotation angle: 360 °
- Dead Band Width: 15 Microsecond
- Operation Voltage: 4.8 – 6.0 Volts
- Recommend Model: Mini Car / Mini Ship /Helicopter & Airplane.
Chrome Steel Extended 1 or 4 Inch Hex Shank Quick Change Adapter Bit Drill Chuck
Features:-
- Material: Chrome Vanadium steel
- Shank Type: Hex Shank
- Diameter: 6. 35mm(1/4)
- Length: 60mm.
- Can be used for prolonging different kinds of screwdrivers.
- Built-in magnetic, fast, fastening, greatly improve work efficiency.
- Suitable for electric drill, screwdriver, wind batch transfer using to play the role of releasing bit holder.
- The interface comes with a locking function
- Extension rod can only be fitted with a single-ended mouthpiece, but not a double-ended mouthpiece.
SEN-PPI150 PP vertical magnetic water level switch liquid level switch float level switch
Features:-
- Model Number: SEN-PPI150.
- Rated voltage: Below DC24V.
- Installation method: vertical.
- 10W, normally open type.
- Float Ball diameter 24mm
- Fixed Screw M10.
- Switch response time: 0.2ms.
- Colour: white colour.
- Material: Plastic PP.
Wemos D1 R2 WIFI ESP8266 Shield Arduino
Features
- Based on the ESP-8266EX.
- Arduino Compatible, you can use it on Arduino IDE.
- NodeMcu Compatible
USBASP programmer
Features
- Compatible Chips:
-
- ATMega Series
- Tiny Series
- Classic Series
- CAN Series
- PWM Series
AC-DC Power Module HLK – PM01 230V to 5V /3W
Features
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test\
AC-DC Power Module HLK -PM03 230V to 3.3V/3W
Features
- Meet UL, CE requirements.
- Ultra-thin, ultra-small.
- All voltage input (AC: 100 ~ 240V).
- Low ripple and low noise.
- Output overload and short circuit protection.
- High efficiency, high power density.
AC-DC Power Module HLK –PM12 230V to 12V/3W
Features
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
7Pin 0.96”128×64 White OLED
Features
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
- Pixel Color: Blue
5MP CAMERA
Features
- Fully Compatible with Both the Model A, Model B and Model B+ Raspberry Pi
- 5MP Omnivision 5647 Camera Module
- Still Picture Resolution: 2592 x 1944
- Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
- 15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
- Size: 20 x 25 x 9mm
- Weight 3g
TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module
Features:-
- Operating voltage (v):DC 8 – 24V
- Chipset:TPA3118
- Power output:60W
- Material:FR4
AC-DC Power Module HLK -5M05 230V to 5V /5W
Features
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
DHT22 MODULE
Features
- Supply voltage: 5V
- Temperature range:-40-80℃ resolution0.1℃ error <±0.5℃
- Humidity range:0-100%RH resolution0.1%RH error±2%RH
- Sequence of the line:VCC,GND,S
- Size: 38 x 20mm