DC 10-25V Digital Wireless Power Amplifier Dual Channel Stereo 2*15W for Background Music
Features:-
- Power Output: Dual-channel 15W+15W. Applicable Speaker Impedance: 4/6/8/10 ohm. Supply Voltage: DC 10-25V.
- Audio Input: Wireless. Max. Receiving Distance: 10M. Supply Voltage: DC 10-25V.
- Power Supply Interface: 2.54*3PIN. Speaker Interface: 2.54*2PIN.
- Audio Input: Wireless. Max. Receiving Distance: 10M.
- PCB Board Size: 58 * 38mm / 2.3 * 1.5in. Weight: 14g / 0.5oz.
DC 12V KK-P25/20 5KG Lifting Solenoid Electromagnet
Features:-
- Operating Voltage: 12V DC
- Lifting Capacity: 8KG
- Size (D x L): 25 x 20 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
DC 12V Pneumatic Diaphragm Water Pump Motor R365
Features:-
- Model: R365 DC micro diaphragm pump
- Working voltage: DC 12V
- No load current: 0.23A
- Maximum flow: 2-3 liters/minute
- Outlet maximum pressure: 1-2.5 kg
- Maximum lift: 1-2.5 meters
- Maximum suction: 2 meters
- Motor length: 32mm
- Motor diameter: 28mm
- Pump length: 36mm
- Total length: 69mm
- Pump diameter: 40mm x 35mm
- Weight: 111 g Approx.
DC 24V Solenoid Air Valve 5 Port 2 Position 4V210 08
Features
- Media: air.
- Working Pressure: 0. 17~0. 7Mpa max.
- Pressure resistance: 1. 05Mpa.
- Fluid temperature: 5 50¡¦
- Effective Sectional area 16mm2 (cv=0. 78)
- Joint pipe bore inlet=outlet=1/4 inch,
- Exhaust=1/8 inch.
- Hole: r/s thread (g1/8): approx. 9. 7Mm or 0. 38Inch,
- P Thread (g1/4): approx. 12. 7Mm or 0. 5Inch
- A, B Thread (g1/4): approx. 12. 7Mm or 0. 5Inch.
- Valve body: brass.
DC 3.7V 7mm x 16mm Magnetic Micro Coreless Motor + Propeller
Features
- Fiber Glass Material
- No batteries Battery
- Non Rechargeable
- Width x Height: 30 mm x 40 mm
Dc 4.5-40v to 5v 2a USB charger dc-dc step-down buck converter voltmeter
Features:
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
DC 48V 1500W BM1418ZXF brushless motor, electric bicycle kit
Features:-
- Model: BM1412ZXF.
- Rated Output Power: 1500W.
- Rated Voltage: 48V DC.
- Speed after Reduction: 555 RPM.
- Rated Speed: 3000 RPM.
- Gear Ratio: 1:5.4.
- Full Load Current: 2/21.10A.
- No Load Current: 4.50/4.0A.
- Rated Torque: 60 N.m.
- Application: Small and Medium size E-Tricycle.
- Load weight: around 1000Kg.
DC 48V 350W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features
-
Model: BM1412ZXF
-
Rated Output Power -1500W
-
Rated Voltage – 48V DC
-
Speed after Reduction – 555 RPM
-
Rated Speed – 3000 RPM
-
Gear Ratio – 1:5.4
-
Full Load Current – 26.2/21.10A
DC 48V 350W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features
- Rated Output Power: 350W
- Rated Voltage:48V DC
- Speed after Reduction: 480 RPM
- Rated Speed:2800 RPM
- Gear Ratio: 1:6
- Full Load Current: 9.4A
- No Load Current: 2.8A
- Rated Torque: 7.2 N.m.
- Application – Small and Medium size E-Tricycle.
DC 48V 500W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features:
- Rated Operating Voltage: 48V DC.
- Rated Power: 750W.
- Rated Speed: 2800 RPM.
- No Load Speed: 3100 RPM.
- Full Load Current: 13.4A.
- No Load Current: 4.0A.
- Rated Torque: 1.7N.m.
- Efficiency: >75%.
- Gear Speed: 400 RPM.
- Gear Torque: 10N.m.
- Gear Ratio: 6:1.
DC 48V 750W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features
- Rated Operating Voltage: 48V DC.
- Rated Power: 750W.
- Rated Speed: 2800 RPM.
- No Load Speed: 3100 RPM.
- Full Load Current: 13.4A.
- No Load Current: 4.0A.
- Rated Torque: 1.7N.m.
- Efficiency: >75%.
- Gear Speed: 400 RPM.
- Gear Torque: 10N.m.
- Gear Ratio: 6:1.
Dc 50A 75Mv Current Shunt Resistor for Amp Meter Gauge
Features
- High quality and good performance used for a dc 50a current amp meter easy to install.
- Accuracy: class 0.5.
- Voltage drop: 75mv.
- Material: steel, cupro-manganese, plastic.
- Color: black.
- Dimension: approx. 4 1/2 X 1 x 3/4 inch.
DC 5V Bluetooth Power Amplifier Board Micro USB Digital Amplifier Module
Features:-
- Amplifier Chip: PAM8403
- Operating Voltage: DC 5V.
- Output Power: 2x 3W.
- Applicable Speaker Impedance: 4/6/8 ohm
- Audio input mode: Bluetooth audio receiver
- Mini size, convenient and easy operation
- Output interface: 2.54 gauge 4 needle
- Dual-channel digital power amplifier Board PBTL.
- 3W output and low power consumption.
- The sound quality is very good by using this module.
DC 6 30V 6V 12V 24V 5A Pwm Motor Speed Controller with Digital Display
Features
- Material: ABS
- Colour: Black
- Input power supply voltage: 6V-30V DC
- Output current: rated current 5A (maximum 8A, can not be extended)
- PWM frequency: 13kHz
- Duty cycle adjustable: 0%-100%
- Adjustable speed range: 0%-100%
- Fine workmanship and good performance.
- Digital display for duty ratio input
- Easy to use.
- Long service life.
DC 60V 3000W BM1412 brushless motor, electric bicycle kit
Features:-
- Model: BM1424ZXF.
- Rated Output Power: 3000W.
- Rated Voltage: 60V DC.
- Speed after Reduction: 570 RPM.
- Rated Speed: 2850 RPM.
- Gear Ratio: 1:5.
- Full Load Current: 46/38A.
- No Load Current: 6.50/6.0A.
- Rated Torque: 49 N.m.
- Application: Medium & Heavy Load size E-Tricycle.
- Load weight: around 2000KG.
Dc power supply module for dc power adapter plate
Features
| Power output interface | 2 VCC, 2-way GND |
| Color | Black Blue |
| Compatible connector size | 2.1 mm |
| PCB Size (mm) | 28×13 |
| Hole Diameter | 6.5mm |
| Pin Diameter | 2.1mm |
| Material | FR4 |
| Weight (gm) | 3.2 |
DC-DC BOOST CONVERTOR Step UP I/P:- 10V-32V O/P:- 12V TO 35V /6A
Features
- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
DC-DC 600W 10-60V to 12-80V Boost Converter Step-up Module Power
Features
- 600W high-power booster module,
- wide voltage input: 12V to 60V,
- 12V to 80V adjustable the width voltage output;
- output current can be adjusted
- ultra-low dropout voltage
DC-DC Adjustable Boost Module 2A Boost Plate 2A Step Up Module with MICRO USB 2V – 24V to 5V 9V 12V 28V LM2577 MT3608
Features:-
- Its efficient by up to93%.
- It can source a good amount of current.
- It is an inexpensive converter module.
- Its simple to adjust to get your desired increase in voltage.
DC-DC Adjustable Boost Module 2A Boost Plate 2A Step Up Module with MICRO USB 2V – 24V to 5V 9V 12V 28V LM2577 MT3608 (Copy)
Features:-
- The anti-theft alarm delay, building sound and light control lamp switch.
- The vehicle-mounted device is turned on delay, to prevent excessive current when the car ignition burned-board equipment.
- The need to have in order to start the case, to prevent multiple devices simultaneously starting current is too large burning appliances.
DC-DC boost module 0.9V ~ 5V l 5V 600MA USB mobile
Features
- The module adopts a high-performance imported chip, performance is superior to the common module.
- Work with indicator light.
- Take the USB female, a wide range of Uses.
- A single AA battery power supply can output a current up to 200~300 ma.
- Two AA batteries to the output current of 500~600 mA.
- Work from battery voltage as low as 0.9V, allowing you to maximize battery use.
- If your USB device is critical on 5V operation you can use this module.
DC6-12V MINI Aquarium water Pump R385
Features:-
- Working voltage: DC 6-12V.
- Working current: 0.5-0.7A.
- Biggest Suction:2 M
- Inner Diameter:4 mm
- Outer diameter: 8 mm
- Lifecycle: up to 2500 H.
DDF-350 with X10F RC Radio Transmitter and Receiver 10 Channel HD Screen 10CH Remote Controller for RC Car Truck Crawler Boat Tank
DUMBORC DDF-350 with X10F RC Radio Transmitter and Receiver 10 Channel HD Screen 10CH Remote Controller for RC Car Truck Crawler Boat Tank
Dean Connector
Features
- Material: plastic and metal (gold plated)
- Improved Locking.
- Gold Plated Connectors tip.
- Color: Red.
- High-Quality built and Material.
- Good resistance to Temperature & High Amp. Current.
Delay Timer Switch Adjustable 0-10sec With NE555 Electrical Input 12V 10A
Features:
- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- Max. load: 2200W.
DHT11 MODULE
Features
- Low power consumption.
- Relative humidity and temperature measurement
- All calibration, digital output
- Excellent long-term stability
- Quality: Normal Quality
DHT22 MODULE
Features
- Supply voltage: 5V
- Temperature range:-40-80℃ resolution0.1℃ error <±0.5℃
- Humidity range:0-100%RH resolution0.1%RH error±2%RH
- Sequence of the line:VCC,GND,S
- Size: 38 x 20mm
DHT22 Sensor
Features
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
Diamond Coated Core Hole Saw Drill Bit Tools for Tiles Marble Glass (5mm 6mm 8mm 10mm 12mm) – Set of 5
Features:-
- Type: Core drill bit.
- Material: Nickel Plated
- Coating: Diamond
- Diy supplies: Electrical
- Perfect for Cutting Accurate Holes in Glass And Ceramics.
- Heavy-duty hole saws plated with nickel with diamond coating gives superior performance on ceramic tile and similar material.
- Sizes: 5/32″, 1/4″, 5/16″, 3/8″, 1/2″(5mm 6mm 8mm 10mm 12mm).
Digital LCD indoor temperature humidity meter thermometer hygrometer Gauge
Features:
- Large LCD display shows big Digital Numbers
- Temperature, Humidity and Time can be seen simultaneously.
- It has Stand to use as table-top or Hook for placing on the wall.
- Integral-hour alarm function
- Time, Date & Month display
- Low Power Consumption
- Adjustment Buttons to select Mode, Setup, and Memory.
Digital PAM8610 2*15w dual channel stereo class amplifier board 12v
Features:-
| Model | PAM 8610 |
| Input Voltage (V) | 7 ~ 15 |
| Working Mode | Class D (PWM modulation type) |
| Power (W) | 15 |
| Length (mm) | 30.5 |
| Width (mm) | 25.5 |
| Height (mm) | 2.6 |
| Weight (gm) | 5 |
Digital power amplifier board module 35W
Features
- Module Type: TDA8932 35W
- Operating Voltage: Single DC10 ~ 30V
- Recommended Voltage: 24V
- Current: Above 2A Switching Power Supply
- Output Power: 35W x 1
- Speaker Impedance: 4-8 ohm, 8 ohm best
- Circuit configuration: Mono BTL Output
Digital STC-1000 all purpose temperature controller thermostat with sensor
Features:
- Temperature measuring range: -50 – 99°C.
- Resolution : 0.1°C.
- Accuracy : ±1°C (-50 – 70°C).
- Sensor error delay: 1 minute.
- Power supply: 220VAC±10%, 50/60Hz
- .Power consumption: ≤3W.
- Sensor: NTC sensor (1PC).
- Relay contact capacity : Cool 10A/250VAC;Heat 10A/250VAC.
- Ambient temperature : 0 – 60°C.
- Storage temperature : -30 – 75°C.
Digital TPA3116D2 2.1 HIFI subwoofer amplifier board 50w+50w+100w beyond
Features:
- Most Perfect 2.1 digital amplifier board.
- 8.20 latest upgrated version
- Gain promoted to 36DB，
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Good sound quality, high efficient device and power amplifying feature.
- 50W x 2+100W 1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
Digital TPA3116D2 2.1 HIFI subwoofer amplifier board 50w+50w+100w Digital Audio Amplifier
Features:-
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
Features:-
- Operating current: 10mA
- Operating voltage: DC 4.5 ~ 30V
- Minimum resolution(V): 0.1V
- Minimum resolution(A): 0.01A
- Display color: Red and Blue (two-color display)
- Measure accuracy: 1%.