Throttle with Battery Indicator & Ignition – BE0302
Features:-
- Throttle Type: With LCD Display
- Material: ABS/PMMA
- Waterproof Lever: IP54
- Voltage: 36V
Throttle with Battery Indicator & Ignition – BE0301
Features:-
- Working Voltage: Throttle(DC) 1V to 4.2V, Battery Level Indicator 12V to 84V
- Throttle for all E-bikes/Bicycles
- Fit for 22.2mm diameter handle
- Shows battery voltage up to 0-100V
- ON/OFF Key Switch Feature.
24V 36V 48V 72V Scooter EBike Electric Throttle Grip Handlebar LED Digital Meter – Orange Color
Features:-
- Product Size: 115 x 33mm.
- Cable Length: About 1.8m.
- Fits for: 22mm diameter Handlebar
- Yellow Wire: Power + 24V 36V 48V 72V.
- Red Wire: +5V.
- Green Wire: signal.
- Black Wire: – Negative Battery connection.
- Blue Wire: I/O button,such as light, horn.
- Yellow Wire: I/O button,such as light, horn.
8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08
Features:-
- Type: KP08
- Material: zinc alloy
- Bore Diameter:8mm
- Mounting Hole Diameter: 5 mm
- Durable with high precision
- Can withstand great weight.
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Step Motor
Features:-
- Model description: SK8
- Shaft ID: 8mm
- Dimensions: 14 x 42 x 32 (LxWxH) mm
- Mounting Hole Diameter: Approx. 5.5 mm
- Center Hole Distance: Approx. 32 mm
- Material: Steel
- Net Weight: 25g.
Ramps 1.6 For 3D Printer Parts
Features:-
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor + Controller
Features:-
- Motor type: 10-inch brushless toothless hub wheel motor+ Controller
- Rated Power: 350w.
- Rated Voltage: 24v.
- Speed: 800 RPM. (400-1000 RPM).
- Speed: 12-28km/h.
- Diameter: 254mm with tire.
- Open File: 95mm.
- Motor Weight: 4.5 kg.
- Load bearing capacity: 80-150 KG.
- Rim Size: 10 inch.
- Certification: CE, CCC, ROHS.
- Motor Efficiency :> 83%.
- Weight: 4.5 kg.
6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor + Controller
Features:-
- Voltage: 24v.
- Motor Type: Balance Car, Scooter, Brushless Hub motor.
- Power Output: 250w-350w.
- Shaft Diameter: Axle size 13.5mm & 16mm, length 53mm.
- Wire length: 200mm approx.
- Opening size: 110mm.
- Color: Black.
- Max speed: 26km/h.
- Weight: 3kg approx.
- Application – Self balancing drift car motor, Razor, electric scooter, light EV Car, E-bike, Electric bicycle, E-scooter, E-motor, motorcycle, small electric motor, etc.
10 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
Features:-
- Rated Power:
- Rated Voltage: 24v.
- Speed: 800 RPM. (400-1000 RPM).
- Motor Efficiency: >83%.
- Rim Size: 10 inch.
- Speed: 12-28km/h.
- Diameter: 254mm with tire.
- Open File: 95mm.
- Weight: 4.5 kg.
- Load Weight: 80-150 KG
- Certification: CE, CCC, ROHS.
6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
Features:-
- Max speed: 28 km/h.
- Weight: 2.03 kg
- Shaft Type: D-type
- Shaft Length: 50 mm
- Shaft Diameter: 16mm (ROUND SIDE); 13.5mm (FLAT SIDE).
DC 60V 3000W BM1412 brushless motor, electric bicycle kit
Features:-
- Model: BM1424ZXF.
- Rated Output Power: 3000W.
- Rated Voltage: 60V DC.
- Speed after Reduction: 570 RPM.
- Rated Speed: 2850 RPM.
- Gear Ratio: 1:5.
- Full Load Current: 46/38A.
- No Load Current: 6.50/6.0A.
- Rated Torque: 49 N.m.
- Application: Medium & Heavy Load size E-Tricycle.
- Load weight: around 2000KG.
DC 48V 1500W BM1418ZXF brushless motor, electric bicycle kit
Features:-
- Model: BM1412ZXF.
- Rated Output Power: 1500W.
- Rated Voltage: 48V DC.
- Speed after Reduction: 555 RPM.
- Rated Speed: 3000 RPM.
- Gear Ratio: 1:5.4.
- Full Load Current: 2/21.10A.
- No Load Current: 4.50/4.0A.
- Rated Torque: 60 N.m.
- Application: Small and Medium size E-Tricycle.
- Load weight: around 1000Kg.
Creality 3D Ender-5 DIY 3D Printer Kit 220*220*300mm Printing Size
Features:-
- Moulding Technology: FDM.
- Print Dimensions: 220*220*300mm.
- Print Speed: <180mm/s, Normal Printing Speed 40-80 mm/s.
- Print Accuracy: + – 0.1mm.
- Layers Thickness: 0.1-0.4mm.
- Nozzle Diameter: Standard 0.4mm. Convertible 0.2, 0.3mm.
- Nozzle Quantity: 1.
- Nozzle Temperature: <260 Degree C
- Hot Bed Temperature: <135 Degree C
- Working Modes: Online or TF Cards are printed offline.
- File Formats: STL, ODJ, AMF.
- Slicing Software: Cura, Repeti-Host, Simlify 3d.
- Power Parameters: Input:110v/220v. 50/60Hz. Output: DC 24V.
- Machine Power: 270W.
KFL08 Zinc Alloy Pillow Block Flange Bearing 8mm Inner Diameter Flange Bearing
Features:-
- Model Number: KFL08
- Material: Zinc Alloy
- Inner diameter: 8mm
- Length: 48mm
- Height: 12mm
- Weight: 26.4g.
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor
Features:-
- Model: SK8.
- Shaft ID: 8mm
- Mounting Hole Diameter: Approx. 5.5 mm
- Center Hole Distance: Approx. 32 mm
- Material: Steel
- Light and simple design
- High torque capacity
- High rigidity
- High positioning accuracy, high rotating accuracy
- High efficiency
- Riding stability
- Dimensions: 14 x 42 x 32 mm
- Weight: 30gm.
KFL08 Zinc Alloy Pillow Block Flange Bearing 8mm Inner Diameter Flange Bearing
Features:-
- Model Number: KFL08
- Material: Zinc Alloy
- Inner diameter: 8mm
- Length: 48mm
- Height: 12mm
- Weight: 26.4g.
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor
Features:-
- Model: SK8.
- Shaft ID: 8mm
- Mounting Hole Diameter: Approx. 5.5 mm
- Center Hole Distance: Approx. 32 mm
- Material: Steel
- Light and simple design
- High torque capacity
- High rigidity
- High positioning accuracy, high rotating accuracy
- High efficiency
- Riding stability
- Dimensions: 14 x 42 x 32 mm
- Weight: 30gm.
JF-0630B DC 24 V 300mA 10mm 6N Push Pull Solenoid Electromagnet
Features:-
- Model: DC 24V 10mm 0.3N
- Rated Operating Voltage (VDC): 24
- Operation Mode: Push-Pull (Normally Closed)
- Holding Force: 0.3 N
- Weight:43 gm.
DC 12V Pneumatic Diaphragm Water Pump Motor R365
Features:-
- Model: R365 DC micro diaphragm pump
- Working voltage: DC 12V
- No load current: 0.23A
- Maximum flow: 2-3 liters/minute
- Outlet maximum pressure: 1-2.5 kg
- Maximum lift: 1-2.5 meters
- Maximum suction: 2 meters
- Motor length: 32mm
- Motor diameter: 28mm
- Pump length: 36mm
- Total length: 69mm
- Pump diameter: 40mm x 35mm
- Weight: 111 g Approx.
DC6-12V MINI Aquarium water Pump R385
Features:-
- Working voltage: DC 6-12V.
- Working current: 0.5-0.7A.
- Biggest Suction:2 M
- Inner Diameter:4 mm
- Outer diameter: 8 mm
- Lifecycle: up to 2500 H.
2pcs x Small Rubber Wheel for N20 Motor – 34×7 mm Diameter
Features:-
- Motor rubber wheel.
- Diameter: 34 mm.
- Tyre width: 6.5 mm.
- D axis diameter: 3mm “D”. “
- Weight: 3.2 g.
3PI miniQ Car wheel Tyre 42mm N20 DC Gear Motor Wheel
Features:-
- Wheel Outer Diameter: 44MM
- Wheel width: 18 mm
- Tire material: Rubber
- Color: Black & White
- Weight: 18 gm
- Coder Accuracy: 12 pulses per revolution
- Wheel weight: 19.4 gm.
Ublox NEO 7M GPS With Compass for APM 2.6/2.8 and Pixhawk 2.4.6/2.4.8
Features:-
- Tracking sensitivity: 161 dBm
- Capture sensitivity : 148 dBm
- cold start time: 38s average
- Warm start time: 35s average
- hot start time: 1s average
- Capture time: 0.1s Average.
3DR Single TTL MINI Radio Telemetry 433MHz 250mW for PIXHAWK and APM
Features:-
- MAVLink protocol framing status documents.
- Frequency modulation and Spread Spectrum (FHSS).
- Self-adaption to time-division multiplexing.
- Support LBT and AFA.
- Configurable duty cycle.
- Built-in error correcting code(up to 25% data bit error).
- AT command configures data transmission.
- RT command remote control data transmission.
- Interchangeable air and ground 433MHz modules.
- Micro-USB port.
- 6-position Molex connector.
- 250mW maximum output power (adjustable).
- SMA connector.
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
Features:-
- Operating Voltage:6~28 VDC
- Max Input Voltage:28 V DC
- Max Current Sensing: 90 A
- Connecting Type:XT-60.
3 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
Features:-
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degrees C
- Holes for Mounting: 3 mm.
2 Wires Mini 0.36 Digital Voltmeter DC 4.7-32V Vehicles Motor Voltage Panel Meter LED Display
Features:-
- The voltmeter use 0.36 inch digital tube display, with super small volume, area with only a coin similar
- Connection is simple, just need to pick up two lines, a joint reverse protection, then do not burn
- Starting voltage is low, only 3.50 V, can correct measurement
- To achieve the best measurement precision, the voltmeter will measure the voltage according to the different automatic moving the position of the decimal point
- Can be used for measuring the car / battery car / motorcycle battery voltage, and other forms of voltage
- Can be used in all kinds of voltage measurement purposes.
APDS-9930 Gesture Sensor Digital Proximity And Ambient Light Sensor For Arduino
Features:-
- Working voltage:2.8-3.8V.
- ALS, IR LED and Proximity Detector in an Optical Module.
- Ambient Light Sensing (ALS).
- Approximates Human Eye Response.
- Programmable Interrupt Function with Upper and Lower Threshold.
- Up to 16-Bit Resolution.
- High Sensitivity Operates Behind Darkened Glass.
- Low Lux Performance at 0.01 lux.
Floating Ball Valve Automatic Float Valve Water Level Control Valve F/ Water Tank Water Tower
Features:-
- Material: plastic
- Form: diaphragm type
- Connection form: thread
- Drive mode: float control
- Flow direction: one direction
- Nominal diameter:15mm
- Automatic control, less water from the fill, the water from the stop.
- Quarter of the inlet, a large amount of water.
- The appearance of fine, small size, practical, simple installation.
SEN-PPI150 PP vertical magnetic water level switch liquid level switch float level switch
Features:-
- Model Number: SEN-PPI150.
- Rated voltage: Below DC24V.
- Installation method: vertical.
- 10W, normally open type.
- Float Ball diameter 24mm
- Fixed Screw M10.
- Switch response time: 0.2ms.
- Colour: white colour.
- Material: Plastic PP.
SEN-PPI35 PP Aquarium Liquid Water Level Sensor Float Switches Normally Open
Features:-
- Model: SEN-PPI35
- Thread: M10
- working current: 0.5A
- Contact Resistance: 0.2Ω
- Wiring Type: 2 wire output
- Working Voltage: DC 110V
- Contact form: NO (Normally Open)
- Temperature: -20℃-80℃
- Material: plastic
- Switch Length: 61mm/2.1inch
- Cable Length: 340mm/13.4inch.
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
Features:-
- Automatic induction: to enter the sensing range
- Ultra-small size.
- Repeatable trigger
- Wide operating voltage range
- Micropower: quiescent current <50
- Output high signal: easy docking and all kinds of circuits.
MPU-9250 GY-9250 9-Axis Sensor Module I2C/SPI Communications Thriaxis gyroscope and accelerometer, magnetic field.
Features:-
- Accelerometer, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules.
GY – 50 L3G4200D 3 – axis Gyroscope/ Gyro Sensor Module for Arduino
Features:-
- Sensor type – Gyroscope, 3 axes.
- Voltage Supply – 2.4 V – 3.6 V.
- IC – L3G4200D.
- Communication Mode: IIC / SPI communications protocol
- Sensing Range – Three selectable full scales (250/500/2000 DPS).
- 16-bit rate value data output
- 8-bit temperature data output
- 32 count FIFO buffer
- Output Lines – Two Digital Output Lines (Interrupt and data ready).
- Operating Temperature: -40 to +85 °c
- Integrated low and high pass filters with user-selectable bandwidth
- Embedded self-test.
Water flow sensor SEN-HZG1WA Pulse Output 4~45L/min Liquid Switch Flowmeter
Features:-
- This is a small zise product that easy to install.
- Made of good quality material, the product is precise and durable, no power consumption.
- Suitable for gas water heater, electric water heater, washer, wall-hanging stove, electromagnetic water
- Heater, intelligent IC water meter,cooling system, circulatory system, heating equipment,etc.
- Three lines: red is positive, black is negative, yellow is pulse signal.
G3/4 Thread Water Flow Sensor Switch Control Meter Flowmeter 1-30L/min SEN-HZ43WB
Features:-
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
- Max current draw: 15mA @ 5V.
- Working Flow Rate: 1 to 30 Liters/Minute.
- Maximum water pressure: 2.0 MPa.
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).