DC 24V Solenoid Air Valve 5 Port 2 Position 4V210 08
Features
- Media: air.
- Working Pressure: 0. 17~0. 7Mpa max.
- Pressure resistance: 1. 05Mpa.
- Fluid temperature: 5 50¡¦
- Effective Sectional area 16mm2 (cv=0. 78)
- Joint pipe bore inlet=outlet=1/4 inch,
- Exhaust=1/8 inch.
- Hole: r/s thread (g1/8): approx. 9. 7Mm or 0. 38Inch,
- P Thread (g1/4): approx. 12. 7Mm or 0. 5Inch
- A, B Thread (g1/4): approx. 12. 7Mm or 0. 5Inch.
- Valve body: brass.
DC 3.7V 7mm x 16mm Magnetic Micro Coreless Motor + Propeller
Features
- Fiber Glass Material
- No batteries Battery
- Non Rechargeable
- Width x Height: 30 mm x 40 mm
Dc 4.5-40v to 5v 2a USB charger dc-dc step-down buck converter voltmeter
Features:
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
DC 48V 1500W BM1418ZXF brushless motor, electric bicycle kit
Features:-
- Model: BM1412ZXF.
- Rated Output Power: 1500W.
- Rated Voltage: 48V DC.
- Speed after Reduction: 555 RPM.
- Rated Speed: 3000 RPM.
- Gear Ratio: 1:5.4.
- Full Load Current: 2/21.10A.
- No Load Current: 4.50/4.0A.
- Rated Torque: 60 N.m.
- Application: Small and Medium size E-Tricycle.
- Load weight: around 1000Kg.
DC 48V 350W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features
-
Model: BM1412ZXF
-
Rated Output Power -1500W
-
Rated Voltage – 48V DC
-
Speed after Reduction – 555 RPM
-
Rated Speed – 3000 RPM
-
Gear Ratio – 1:5.4
-
Full Load Current – 26.2/21.10A
DC 48V 350W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features
- Rated Output Power: 350W
- Rated Voltage:48V DC
- Speed after Reduction: 480 RPM
- Rated Speed:2800 RPM
- Gear Ratio: 1:6
- Full Load Current: 9.4A
- No Load Current: 2.8A
- Rated Torque: 7.2 N.m.
- Application – Small and Medium size E-Tricycle.
DC 48V 500W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features:
- Rated Operating Voltage: 48V DC.
- Rated Power: 750W.
- Rated Speed: 2800 RPM.
- No Load Speed: 3100 RPM.
- Full Load Current: 13.4A.
- No Load Current: 4.0A.
- Rated Torque: 1.7N.m.
- Efficiency: >75%.
- Gear Speed: 400 RPM.
- Gear Torque: 10N.m.
- Gear Ratio: 6:1.
DC 48V 750W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features
- Rated Operating Voltage: 48V DC.
- Rated Power: 750W.
- Rated Speed: 2800 RPM.
- No Load Speed: 3100 RPM.
- Full Load Current: 13.4A.
- No Load Current: 4.0A.
- Rated Torque: 1.7N.m.
- Efficiency: >75%.
- Gear Speed: 400 RPM.
- Gear Torque: 10N.m.
- Gear Ratio: 6:1.
Dc 50A 75Mv Current Shunt Resistor for Amp Meter Gauge
Features
- High quality and good performance used for a dc 50a current amp meter easy to install.
- Accuracy: class 0.5.
- Voltage drop: 75mv.
- Material: steel, cupro-manganese, plastic.
- Color: black.
- Dimension: approx. 4 1/2 X 1 x 3/4 inch.
DC 5V Bluetooth Power Amplifier Board Micro USB Digital Amplifier Module
Features:-
- Amplifier Chip: PAM8403
- Operating Voltage: DC 5V.
- Output Power: 2x 3W.
- Applicable Speaker Impedance: 4/6/8 ohm
- Audio input mode: Bluetooth audio receiver
- Mini size, convenient and easy operation
- Output interface: 2.54 gauge 4 needle
- Dual-channel digital power amplifier Board PBTL.
- 3W output and low power consumption.
- The sound quality is very good by using this module.
DC 6 30V 6V 12V 24V 5A Pwm Motor Speed Controller with Digital Display
Features
- Material: ABS
- Colour: Black
- Input power supply voltage: 6V-30V DC
- Output current: rated current 5A (maximum 8A, can not be extended)
- PWM frequency: 13kHz
- Duty cycle adjustable: 0%-100%
- Adjustable speed range: 0%-100%
- Fine workmanship and good performance.
- Digital display for duty ratio input
- Easy to use.
- Long service life.
DC 60V 3000W BM1412 brushless motor, electric bicycle kit
Features:-
- Model: BM1424ZXF.
- Rated Output Power: 3000W.
- Rated Voltage: 60V DC.
- Speed after Reduction: 570 RPM.
- Rated Speed: 2850 RPM.
- Gear Ratio: 1:5.
- Full Load Current: 46/38A.
- No Load Current: 6.50/6.0A.
- Rated Torque: 49 N.m.
- Application: Medium & Heavy Load size E-Tricycle.
- Load weight: around 2000KG.
Dc power supply module for dc power adapter plate
Features
| Power output interface | 2 VCC, 2-way GND |
| Color | Black Blue |
| Compatible connector size | 2.1 mm |
| PCB Size (mm) | 28×13 |
| Hole Diameter | 6.5mm |
| Pin Diameter | 2.1mm |
| Material | FR4 |
| Weight (gm) | 3.2 |
DC-DC BOOST CONVERTOR Step UP I/P:- 10V-32V O/P:- 12V TO 35V /6A
Features
- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
DC-DC 600W 10-60V to 12-80V Boost Converter Step-up Module Power
Features
- 600W high-power booster module,
- wide voltage input: 12V to 60V,
- 12V to 80V adjustable the width voltage output;
- output current can be adjusted
- ultra-low dropout voltage
DC-DC Adjustable Boost Module 2A Boost Plate 2A Step Up Module with MICRO USB 2V – 24V to 5V 9V 12V 28V LM2577 MT3608
Features:-
- Its efficient by up to93%.
- It can source a good amount of current.
- It is an inexpensive converter module.
- Its simple to adjust to get your desired increase in voltage.
DC-DC Adjustable Boost Module 2A Boost Plate 2A Step Up Module with MICRO USB 2V – 24V to 5V 9V 12V 28V LM2577 MT3608 (Copy)
Features:-
- The anti-theft alarm delay, building sound and light control lamp switch.
- The vehicle-mounted device is turned on delay, to prevent excessive current when the car ignition burned-board equipment.
- The need to have in order to start the case, to prevent multiple devices simultaneously starting current is too large burning appliances.
DC-DC boost module 0.9V ~ 5V l 5V 600MA USB mobile
Features
- The module adopts a high-performance imported chip, performance is superior to the common module.
- Work with indicator light.
- Take the USB female, a wide range of Uses.
- A single AA battery power supply can output a current up to 200~300 ma.
- Two AA batteries to the output current of 500~600 mA.
- Work from battery voltage as low as 0.9V, allowing you to maximize battery use.
- If your USB device is critical on 5V operation you can use this module.
DC6-12V MINI Aquarium water Pump R385
Features:-
- Working voltage: DC 6-12V.
- Working current: 0.5-0.7A.
- Biggest Suction:2 M
- Inner Diameter:4 mm
- Outer diameter: 8 mm
- Lifecycle: up to 2500 H.
DDF-350 with X10F RC Radio Transmitter and Receiver 10 Channel HD Screen 10CH Remote Controller for RC Car Truck Crawler Boat Tank
DUMBORC DDF-350 with X10F RC Radio Transmitter and Receiver 10 Channel HD Screen 10CH Remote Controller for RC Car Truck Crawler Boat Tank
Dean Connector
Features
- Material: plastic and metal (gold plated)
- Improved Locking.
- Gold Plated Connectors tip.
- Color: Red.
- High-Quality built and Material.
- Good resistance to Temperature & High Amp. Current.
Delay Timer Switch Adjustable 0-10sec With NE555 Electrical Input 12V 10A
Features:
- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- Max. load: 2200W.
DHT11 MODULE
Features
- Low power consumption.
- Relative humidity and temperature measurement
- All calibration, digital output
- Excellent long-term stability
- Quality: Normal Quality
DHT22 MODULE
Features
- Supply voltage: 5V
- Temperature range:-40-80℃ resolution0.1℃ error <±0.5℃
- Humidity range:0-100%RH resolution0.1%RH error±2%RH
- Sequence of the line:VCC,GND,S
- Size: 38 x 20mm
DHT22 Sensor
Features
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
Diamond Coated Core Hole Saw Drill Bit Tools for Tiles Marble Glass (5mm 6mm 8mm 10mm 12mm) – Set of 5
Features:-
- Type: Core drill bit.
- Material: Nickel Plated
- Coating: Diamond
- Diy supplies: Electrical
- Perfect for Cutting Accurate Holes in Glass And Ceramics.
- Heavy-duty hole saws plated with nickel with diamond coating gives superior performance on ceramic tile and similar material.
- Sizes: 5/32″, 1/4″, 5/16″, 3/8″, 1/2″(5mm 6mm 8mm 10mm 12mm).
Digital LCD indoor temperature humidity meter thermometer hygrometer Gauge
Features:
- Large LCD display shows big Digital Numbers
- Temperature, Humidity and Time can be seen simultaneously.
- It has Stand to use as table-top or Hook for placing on the wall.
- Integral-hour alarm function
- Time, Date & Month display
- Low Power Consumption
- Adjustment Buttons to select Mode, Setup, and Memory.
Digital PAM8610 2*15w dual channel stereo class amplifier board 12v
Features:-
| Model | PAM 8610 |
| Input Voltage (V) | 7 ~ 15 |
| Working Mode | Class D (PWM modulation type) |
| Power (W) | 15 |
| Length (mm) | 30.5 |
| Width (mm) | 25.5 |
| Height (mm) | 2.6 |
| Weight (gm) | 5 |
Digital power amplifier board module 35W
Features
- Module Type: TDA8932 35W
- Operating Voltage: Single DC10 ~ 30V
- Recommended Voltage: 24V
- Current: Above 2A Switching Power Supply
- Output Power: 35W x 1
- Speaker Impedance: 4-8 ohm, 8 ohm best
- Circuit configuration: Mono BTL Output
Digital STC-1000 all purpose temperature controller thermostat with sensor
Features:
- Temperature measuring range: -50 – 99°C.
- Resolution : 0.1°C.
- Accuracy : ±1°C (-50 – 70°C).
- Sensor error delay: 1 minute.
- Power supply: 220VAC±10%, 50/60Hz
- .Power consumption: ≤3W.
- Sensor: NTC sensor (1PC).
- Relay contact capacity : Cool 10A/250VAC;Heat 10A/250VAC.
- Ambient temperature : 0 – 60°C.
- Storage temperature : -30 – 75°C.
Digital TPA3116D2 2.1 HIFI subwoofer amplifier board 50w+50w+100w beyond
Features:
- Most Perfect 2.1 digital amplifier board.
- 8.20 latest upgrated version
- Gain promoted to 36DB，
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Good sound quality, high efficient device and power amplifying feature.
- 50W x 2+100W 1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
Digital TPA3116D2 2.1 HIFI subwoofer amplifier board 50w+50w+100w Digital Audio Amplifier
Features:-
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
Features:-
- Operating current: 10mA
- Operating voltage: DC 4.5 ~ 30V
- Minimum resolution(V): 0.1V
- Minimum resolution(A): 0.01A
- Display color: Red and Blue (two-color display)
- Measure accuracy: 1%.
DIY 2DOF Metal Robot Arm with Gripper Clamp Frame kit for Arduino (not including servo)
Features:
- Package total weight: 112 gm.
- Clamp Claw: Weight capacity is about 300 gm objects.
- Material: Full aluminum alloy.
- Weight: About 64gm.
- Maximum angle: 54mm.
- Total length: 110mm (paw when closed overall longest length).
- Total width: 94mm (the claws open when the maximum overall width).
- Aluminum Matte Coat Pan and Tilt for the horizontal surface, unassembled.
- Servo bracket used in the shoulders and knees or another joint of humanoid robots, biped robots etc.
- Can plant a camera or IR sensor for Robot.
DIY 3DOF 3-Axis Control Palletizing Robot Arm Model with Servo Arm Plate (not including MG995 servo)
Features:
1. 3-DOF manipulator! Vertical arm up and down, back and forth.
2. U-type robot waist bracket on the arm can be mounted directly on the base in the car or any other desktop platform.
3. The vehicle type 3-DOF manipulator medium length, back and forth up and down, in which a mechanical claw opening and closing of the steering gear control, two servo control arm up and down back and forth.
4. This robot is particularly suitable as a vehicle manipulator robot car, grab the ball, catch the car are particularly good, very suitable for their own DIY or robotic smart car racing.
5. Activities can use 180 degree steering joints.
DIY Smart RC Line Tracker Following Robot Car Tracking kit STEAM Educational Programmable – IR Sensor Based Line Follower Complete Kit
Features:-
- Easy to Assemble
- Operating Voltage: 3V
- Line Map included
- Battery is not included