APDS-9930 Gesture Sensor Digital Proximity And Ambient Light Sensor For Arduino
Features:-
- Working voltage:2.8-3.8V.
- ALS, IR LED and Proximity Detector in an Optical Module.
- Ambient Light Sensing (ALS).
- Approximates Human Eye Response.
- Programmable Interrupt Function with Upper and Lower Threshold.
- Up to 16-Bit Resolution.
- High Sensitivity Operates Behind Darkened Glass.
- Low Lux Performance at 0.01 lux.
APM/Pixhawk Power Module V6.0 Output BEC 3A XT60 Plug 28V 90A
Features:-
- Operating Voltage:6~28 VDC
- Max Input Voltage:28 V DC
- Max Current Sensing: 90 A
- Connecting Type:XT-60.
Arduino Sensor Shield
Features
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
Arduino CNC Shield
Features
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Supports PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- Supports Coolant enable
Arduino Nano
Features
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70”
Arduino Uno
Features
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
Ardupilot Mega APM 2.8 Flight Controller
Features
- Model: APM 2.8
- Input Voltage (V): 12-16 V.
- Processor: ATMEGA2560 and ATMEGA32U-2
- Dimensions (mm) LxWxH: 70 x 45 x 15
Attiny 5 Version 1
Features
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
Attiny 5 Version 2
Features
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The On – board, 150 ma 5 v Regulator.
- Built – in USB and serial was debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
AVR-ISP 10Pin to 6pin Adapter PCB for USBASP Programmer
Features:
- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side: 6.
- Connector type on USBASP side: Male.
- Connector type on Device under programming side: Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
BF-555 Gear / Geared Motor 18 RPM – High Torque
Features:
- Rated Voltage: 12v
- RPM: 18 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 220 mA
- Load Current: 800 mA
- Stall Current: 3 A
- Full (Stall) Load Torque: 60 kg-cm
- Weight: 500g Approx.
BF-555 Gear / Geared Motor 6 RPM – High Torque
Features:
- Rated Voltage: 12v
- RPM: 6 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 110 mA
- Load Current: 450 mA
- Stall Current: 1.8 A
- Full (Stall) Load Torque: 90 kgcm
- Weight: 500g Approx.
BF-555 Gear / Geared Motor 60 RPM – High Torque
Features:
- Rated Voltage:12v
- RPM: 60 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 110 mA
- Load Current: 450 mA
- Stall Current: 1.8 A
- Full (Stall) Load Torque: 30 kg cm
- Weight: 500g Approx.
BH1750
Features
- High precision determination accurate to 1 Lu for different lights
- Operating Voltage: 3-5VDC
- Built-in 16bit A/D converter
- I2C interface
Black 2M Usb 6 Led Waterproof Borescope Endoscope Inspection Tube Camera
Features:-
- USB interface: USB 2.0
- Cable Length: 2M
- Camera head outer diameter: 7mm.
- Pixels: 300000 pixels.
- Resolution: 640*480(VGA), 30 ftps.
- LED: 6 white LED bright light.
- Focal distance: 2cm-infinate.
- Waterproof level: IP67.
- Temperture: -20 ~ 100℃.
- Color: black.
Blade Propeller for 8520 8.5x20mm
Features
- Material: Glass Fiber.
- Total Length: 55 mm.
- Propeller diameter (ID): 2.9 mm.
-
Color: Black & Red.
- Durable plastic construction
- Strong and lightweight
Bluetooth 4.0 Audio Receiver Board Wireless Stereo Sound Module 12V 24V Car
Features:-
- Sound balance:£¼2db
- Transmit power: Class2
- Handsfree protocol:1.6
- Supply voltage: DC 6~30V
- Transmission distance:10~20M
- Frequency response: 80Hz~22KHz
- Size(L*W*H):55 x 50 x 10 mmBluetooth Specification: Bluetooth V3.0+EDR, Support Bluetooth 4.0
BMP280 pressure sensor module high precision arduino replace BMP180
Features:
- Get more precise temperature, atmospheric pressure values, and approximate altitude data
- Enhancement of GPS navigation (e.g. time-tofirst-fix improvement, dead-reckoning, slope detection)
- Indoor navigation (floor detection, elevator detection)
- Outdoor navigation, leisure and sports applications
- Weather forecast
- Health care applications (e.g. spirometry)
- Vertical velocity indication (e.g. rise/sink speed)
- Libraries and tutorials available for Arduino and other micro controllers
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C)
- Operating Pressure: 300 hPa to 1100 hPa
- Peak current: 1.12mA.
BO Motor L Shape
Features
- Shaft length: 7 mm
- Motor Design: L-Shaped
- Shaft Diameter: 5.5 mm
- Size: 55 x 48 x 23 mm.
- Operating Voltage: 3 to 12V
- Current (without loading): 40-180mA
- RPM: 300 rpm
- Output Torque: 0.35 kg cm.
Brass G1/4″ BSP Hall Effect Flow Sensor Water 0.35-3.0L/min OD12 waterTurbine Flowmeter SEN-HZ41WC
Features:-
- Water quality requirement: Drinking water health standards, 0～80℃.
- Flow range: 0.35 ～ 3.0 Liter/min.
- Withstand hydraulic pressure: ≤1.75 MPa.
- Voltage/electric current: DC 4.5 ～ 18 Volt, ≤15mA.
- Insulation resistance: >100MΩ.
- Electrical strength: AC500V, 50HZ.
- Output level: Rated voltage DC5V, high level ≥4.5 Volt, low level ≤0.5 Volt.
- Pulse duty cycle: 50%.
- Flow characteristic: F=73Q, F:HZ, Q:L/min，±10%.
- Cumulative flow conversion: 1 Liter water=1780 pulse, accuracy: 8%.
Brass Nozzle – 0.3 mm
Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
Bullet Connector 3.5MM
Features
- Material: Brass
- Plating: Gold
- Size: 3.5mm
- Current Rating: 30A
Camera Case Lens Frame Replacement For DJI FPV Gimbal Front Shell Motor Part
100% brand new and high quality
Made of high quality material, wear-resistant and durable
Easy to assemble and disassemble
Match to your DJI FPV perfectly as the original one
Replace your broken, damaged, cracked, unusable camera shell motor part
Capacitive Touch Dimmer LED Dimmer PWM Control Switch Module
Features:
- Operating Voltage Range : 2.4 – 4.5
- Aperture (mm) : 16
- Length (mm) : 39
- Width (mm) : 19
- Height (mm) : 11
- Weight (gm) : 3
Cartoon ultrasonic sensor fixing bracket
Features
- Acrylic Body.
- Easy to install.
- compatible with HC-SR04
Cartridge Heater 6MM 12V 40 W PR12
The 12v 40W Ceramic Cartridge Heater is a powerful little beast of a heater. Get rid of fragile and poor tolerance enamel resistors and switch to a purpose made high power ceramic heater cartridge.
CC3D flight Control
Features
- Model: CC3D EVO
- Input Voltage:5 V
- Sensors: Micro-Controller STM32, MPU6000
CD74HC4067 High Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module
Features:-
- 2V to 6V operation
- “On” resistance: 70 Ohms @ 4.5V
- 6ns break-before-make @ 4.5V
- Wide operating temperature range: -55C to 125C.
CH375B U-DISK read write module USB interface communication spi interface
Features:
- CH375B with the 8-bit data bus and read, write, chip select control lines and interrupt output can be easily attached to the system bus of the microcontroller/DSP/MCU/MPU controller.
- USB host mode, CH375B provides serial communication via serial input, serial output, and interrupt output monolithic/DSP/MCU/MPU connected.
- 28 connector, easy with the MCU mount.
- Jumper selectable can work in parallel or serial mode.
- USB status indicator.
- On board 3.3 V LDO 1117, provides 800 mA current.
- Color: Blue.
Chrome Steel Extended 1 or 4 Inch Hex Shank Quick Change Adapter Bit Drill Chuck
Features:-
- Material: Chrome Vanadium steel
- Shank Type: Hex Shank
- Diameter: 6. 35mm(1/4)
- Length: 60mm.
- Can be used for prolonging different kinds of screwdrivers.
- Built-in magnetic, fast, fastening, greatly improve work efficiency.
- Suitable for electric drill, screwdriver, wind batch transfer using to play the role of releasing bit holder.
- The interface comes with a locking function
- Extension rod can only be fitted with a single-ended mouthpiece, but not a double-ended mouthpiece.
CJMCU Guva S12SD Sunlight Ultraviolet UV Ray Intensity
Features
- Low power consumption
- Power supply voltage of 2.5 V ~ 5 V
- working current is microamps.
- High sensitivity
- High stability
- Wide detection range: 240 nm to 370 nm
- Wide Angle: 130 degrees
- Schottky type photosensitive diode
- Size: 11 mm x 27 mm
Color Sensor
Features
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
Combo Kit – MY1016 250W Motor Kit
Features
- rated speed (rpm) :2650 +/- 5 %
- rated current : ≤ 13.7A; current without load :0.7 – 1.4 A
- rated torque :0.87 Nm
- transmission :chain sprocket (11 teeth, pitch 1/4″=6,35 mm), exchangeable, fixation nut shaft diameter :10 mm (milled groove one-sided 1,5 mm)
Combo Kit – MY1016Z2 250W Motor Kit
Features
- 24 Volt DC Operation
- Permanent Magnet DC Motor
- Direct Drive (No Free Spooling)
- Suitable for forwarding and Reverse Operations
- Base Mount Model
- 9 Tooth Sprocket for 1/2 x 1/8 Pitch Chain
- This motor is capable of rotation in either clockwise or counterclockwise by reversing the motors power wires.
Combo Kit – MY1016Z3 350W Motor DIY Ebike, Electric Bicycle Kit
Features:
MY1016Z3 350W Motor:
- Voltage: 24 volts DC
- Output: 350 watt
- Left or right rotation by reversing wires
- MY1016Z3 motor with gear reduction
- 300 RPM (after Reduction)
Motor Controller Specifications:
- Dimensions: 83 x 70 x 38 mm(LxWxH)
- Cables length: 10 CM(Approx.)
- Weight: 196 gm
- Rated voltage: 24 v DC
- Current limit: 33A
- Rated power: 350 w
- Matching motor: dc brushed motor
- Under Voltage Protection: 20V
- Strong Aluminium body
Control Horn (Pack Of 10)
4-Hole Nylon Pin Control Horns, a necessary part for model airplane control horn quick adjusting.