Tb6612Fng Dual Motor Driver Module for Arduino/Other Microcontroller
Features
- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Operating Voltage(VDC): 15
- Peak Current (A): 3.2
- Continuous Current (A): 1.2
- No. of Channels: 1.
Color Sensor
Features
- Operating Voltage: 3V-5V
- High-resolution conversion of light intensity to frequency.
- Chip pins all has drawn for standard 100.
- Put the needle (2.54 mm).
- Mil-convenient for bitmap board.
- Programmable color and full-scale output frequency.
- Communicate directly with a microcontroller.
- Low-profile surface mount package.
L298P Motor Shield motor driver
Features
- L298P based Arduino motor driver shield
- Onboard Buzzer (D4).
- Onboard Bluetooth interface, you can directly plug, no wiring required.
- Six Analog interface.
- Forward, Backward steering indicators
STM32F103C8T6 ARM board
Features
- 2.0-3.6V power, I/O.
- Operating voltage:3.3V
- Analog inputs:10
- Digital I/O pins:37
- DC source/sink from I/O pins:6mA
- Flash memory (KB):64/128
- SRAM:20KB
- Frequency (clock speed):72MHz max.
- Communication:I2C, SPI, UART, CAN, USB
10DOF 9-AXIS GY-87
Features
- 3-axis Gyro+Acceleration+Magnetic Fiel
- Air Pressure Module
- Power supply: 3-5V
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from motor and other high current electronics
- You can easily select two I2C address for MPU6050 by soldered jumper
FlexiForce Tekscan A301 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter.
TPA3116D2 50Wx2+100W 2.1 Channel Digital Subwoofer Amplifier Board 12V-24V
Features:-
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Good sound quality, high efficient device and power amplifying feature.
- 50W x 2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
- Just connect the power supply and loudspeaker box, enjoy pure digital music!.
DC-DC 600W 10-60V to 12-80V Boost Converter Step-up Module Power
Features
- 600W high-power booster module,
- wide voltage input: 12V to 60V,
- 12V to 80V adjustable the width voltage output;
- output current can be adjusted
- ultra-low dropout voltage
RS50 200 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 200 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
RS50 300 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 300 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
PZIN14016700 Multifunction Self-Lock Relay Cycle Timer Module Plc Automation Delay 12V
Features:-
- Input voltage: dc12v control voltage (no?: Ac 0~250v / max. 10A, dc 0~30v / max). 10A control voltage (nc?: Ac 0~125v / max. 10A, dc 0~28v / max. 10A).
- Size: approx. 6.5 X 4cm / 2.6 X 1. 6″”.
- Connections: control side: dc+: 12v positive dc-: power in negative ch1: signal input output side: no: normal open (before relay closes, this pin is not connected. After relay closes, the pin short-connects with com)
- com: common
- nc: normal closed (before relay closes, this pin short-connect with com. After relay closes, the pin is not connected )
Controller – 24v 600W
Features
| Compatible for Motor | MY1020 600W |
| Body Material | Aluminium |
| Cable Length (cm) | 10 |
| Current Limit (A) | 33 |
| Rated Voltage(V) | 24 v DC |
| Under-Voltage Protection (V) | 20 V |
| Weight (gm) | 215 |
| Dimensions in mm (LxWxH) | 83 x 70 x 38 |
| Rated Power (W) | 600 |
7 mm 6 LED Endoscope Waterproof Inspection Borescope Camera 5M USB Cable
Features:-
- Lens Diameter: 7.0MM
- Pixel: 0.3 megapixels
- Resolution: 640*480
- sensor size: 1/9 inch
- Frame Rate: 30fps
- View Angle: 67 degree
- Focal Distance: 3cm-10cm-
- LED Lights: 6pcs
- Interface: USB2.0
- Photo format: jpeg
- Video Format: AVI
- Waterproof level: IP67.
60W DC 12V High Pressure Water Pump 5L/min Self Priming Micro Diaphragm Pump Automatic Switch Car Vehicle Cleaning Pump
Features:-
- Working voltage: DC 12V
- No load current: 0.23A
- Maximum flow: 2-3 liters/minute
- Outlet maximum pressure: 1-2.5 kg
- Maximum lift: 1-2.5 meters
- Maximum suction: 2 meters
- Motor length: 32mm.
DJI FPV Gimbal Shock Absorber
Gimbal shock absorber bracket repair replacement for DJI FPV Combo drone.
High-quality, reliable and durable.
No color difference, easy to install.
Package include:1pc gimbal shock absorber bracket.
FT Elements Essential Speed Build Kit Accessories for Flite Test RC planes
Get all you need to start building the FliteTest planes in one kit here. Kitincludes 15 Hard to find items : Pushrods, Landing gear wire,BBQ Skewers, Linkage Connectors, Coffee Stirrers, Laser Cut Aeroply parts, Latex rubber bands and more.
Two channel 2.0 15W+15W TDA2030A hifi stereo amplifier AMP board DIY Kit
Features:-
- Stereo Amplifier. Operating Voltage – 12V. Power Requirement – 15-20W.
- Maximum output power – left and right channel 15Wx2.
- Output Impendance – 4-8 ohms, speaker can drive 15-45W.
- Board Size – 75x90mm.
A6 GSM GPRS Module Quad Band SMS Voice
Features:
- Working voltage: 3.3V-4.2V
- Power voltage> 3.4V
- Standby average current: 3mA
- Working temperature: -30 to + 80
- Supports Quad-band: GSM850, EGSM900, DCS1800 and PCS1900
- Connect onto any global GSM network with any 2G SIM
- Make and receive voice calls using an external 8Ω speaker & electret microphone
- Facility to connect 4-pole TRRS mic and headset
- 8V UART port level – compatible with Arduino, Raspberry-Pi
- Supports serial-based AT Command Set
- Accepts Micro SIM Card.
DYS Motor D2826 1400KV
Features
- Model: D2826-10
- Voltage: 7.2v~11.1v / 2~3s Lipo
- Kv: 1400 rpm/v
- Shaft Diameter: 3mm
- Shaft Length: 10mm
- Max Watts: 205W
- ESC: 40A
- Screw Size: M3
NEMA 17 5.5 kgcm
Features
- Step Angle: 1.8°.
- Current: 1.5 A /Phase.
- Holding Torque: 5.5 kg-cm.
- Detent Torque: 2.6 kg-cm
- Weight – 360 gm.
SIM 800C Quadband GSM GPRS Module
Features:
- Supply Voltage (V): 3.4 ~ 12
- GSM (MHz): 850, 900, 1800 and 1900
- Flash Memory (MB): 24
- RAM Memory (MB): 32.
QAV250 Frame
Features
- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
10W solar panel
Features
- 12 volt 10-watt polycrystalline solar panel USB charging.
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- A unique technique to prevent water frozen within the deforming framework.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
SIM800A Quadband GSM / GPRS Module convertible as Shield for Arduino
Features
- Quad-band 850/900/1800/1900MHz.
- GPRS class 2/10.
- Input Voltage : 9V-12V DC.
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT command set).
- Configurable baud rate.
- Built-in SIM Card holder.
- Built-in Network Status LED.
5v-12v ZVS induction low voltage heating power supply module board + coil
Features:
- The DC power supply voltage is 5V to 12V.
- Easy Installation
- Maximum power 120W(12V induction heating).
- Plug and Play operation
- Input voltage: 5v-12v DC
- Coil Size(cm): 7×2.5cm
- Coil DIAmeter(cm): 2.2cm
- Module dimensions(cm) L x W x H: 5.5 x 3.8 x 2cm
- Maximum Power Consumption: 120W.
DIY 2DOF Metal Robot Arm with Gripper Clamp Frame kit for Arduino (not including servo)
Features:
- Package total weight: 112 gm.
- Clamp Claw: Weight capacity is about 300 gm objects.
- Material: Full aluminum alloy.
- Weight: About 64gm.
- Maximum angle: 54mm.
- Total length: 110mm (paw when closed overall longest length).
- Total width: 94mm (the claws open when the maximum overall width).
- Aluminum Matte Coat Pan and Tilt for the horizontal surface, unassembled.
- Servo bracket used in the shoulders and knees or another joint of humanoid robots, biped robots etc.
- Can plant a camera or IR sensor for Robot.
4 Pin Digital LCD Wood Moisture Meter Timber Damp Detector Tester 5% 40%
Features:-
- Model:MD-4G
- Display: LCD Display
- Range:5%~40%
- Resolution:1%
- Single probe length:10mm
- Color: Gray
- Material: Plastic
- Power Supply:1 x 9V Battery (Not included)
- Measure moisture content of wood, bamboo, paper etc.
- Stable performance and quick response, the meter is really reliable.
- With data hold function and low battery indication.
DC 10-25V Digital Wireless Power Amplifier Dual Channel Stereo 2*15W for Background Music
Features:-
- Power Output: Dual-channel 15W+15W. Applicable Speaker Impedance: 4/6/8/10 ohm. Supply Voltage: DC 10-25V.
- Audio Input: Wireless. Max. Receiving Distance: 10M. Supply Voltage: DC 10-25V.
- Power Supply Interface: 2.54*3PIN. Speaker Interface: 2.54*2PIN.
- Audio Input: Wireless. Max. Receiving Distance: 10M.
- PCB Board Size: 58 * 38mm / 2.3 * 1.5in. Weight: 14g / 0.5oz.
DJI FPV Bottom Shell
Compatibility: DJI FPV Drone Only
SIM28 GPS Module / Modem with GPS antenna
Feature
- 6-channels GPS search engine
- Ultra low power design (38mA, typical)
- Compact size
- Built-in low noise, high gain active antenna
- Super-cohesive magnetic for installation
- High sensitivity (up to -152dBm typ)
- Apply to host devices with USB or RS232.
3D printer pen PR58
This 3D Pen is an ideal gift for your kids, your friends, or yourself. Childhood is the best time to develop children’s potential. This 3D printing pen helps to train the children’s outsight, attention, imagination, and creativity. It is also a great way for adults to relieve stress or cultivate interests, let alone a person who is a designer, architect, artist, or crafts lover will love to create anything in mind. This 3D Pen is compatible with both PLA and ABS. More filament, more fun, brings your enjoyable drawing and creating an experience. PLA Filament is produced from organic substances such as corn and sugarcane. This makes PLA plastic non-toxic and has no unpleasant odor, much safer and more comfortable than other 3D Pen filament plastics. There is a Speed Controller on the 3D Pen for you to control the 3D Pen extrusion speed for smoother operation and intricate drawing. Adjustable temperature suits your different needs. It allows you to choose the appropriate melting point (temperature) according to the filament you are using. (PLA:160℃-210℃, ABS:210℃-235℃). The 3D Pen will switch to standby mode automatically when not used for over 5 minutes. The 3D printing pen has a heat dissipation port, protecting the user from scalding. Making use of advanced cooling technology, the filament is heated through the pen body and cooled down before it flows from the nozzle, avoiding the risk of scald. This 3D Printing Pen is designed with a slim body and is lightweight. It is extremely easy to handle just like holding a normal pen; even kids can handle it in a breeze. Simply plug in, heat up, and you are almost ready to go.
Note:
- DO NOT touch the nib during using it. Please unload the filament after use and turn off the power.
- DO NOT touch the nozzle before the 3D printing pen cooling.
Q330 Frame
Features
- Colour: Black & Red
- Wheelbase: 325mm
- Frame Diameter: 330mm
- Frame Spacing: 30mm
- Recommend to use 3S 2200-4000mah Lipo battery
- Glass fibre material on centre plates
- Glass-filled nylon arms for increased strength and durability
- Lightweight arm design
- Integrated PDB for easy wiring and tidy installation
- Increased internal space for additional electronics/equipment
- Additional mounting holes for frame upgrades
- Suitable for CC3D\MWC\APM\PIXHAWK\NAZA flight control
Sunny Sky A2212 980 kv
Features
- Poor man’s Tiger motor
- Brand name: Sunnysky
- KV: 980KV.
- Framework: 12N14P
- Operating Current: 6A ~ 18A
- Peak Current: 14A
- Shaft: 3mm.
- thrust: 880g
- Stator Diameter: 22mm
- Stator Thickness: 12mm
- of Stator Slots: 12
DYS Motor D2826 1800KV
Features
| Voltage Rating (V DC) | 7.4 – 11.1 |
| Motor KV (RPM/V) | 1800 |
| LiPo Batteries | 2S-3S |
| Shaft Diameter x Length (mm) | 3.175x37mm |
| Maximum Pull | 820g |
| Max Power | 300 Watt |
| Suitable ESC | 30A |
| Length (mm) | 28 |
| Width (mm) | 22 |
| Weight (gm) | 50 |
RS50 10 rpm
Features
| Voltage | 12 V |
| Power Source | DC |
| Model Name/Number | 10 RPM RS-50 High Torque Side Shaft DC |
| Brand | Probots |
| Material | Metal |
| Speed | 10 RPM |
| Motor Type | DC |
Throttle with Battery Indicator & Ignition – BE0302
Features:-
- Throttle Type: With LCD Display
- Material: ABS/PMMA
- Waterproof Lever: IP54
- Voltage: 36V