NEMA 23 7.2 kg-cm
Features
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 51
- Current/Phase A: 1
- No of Leads: No. 6
- Shaft type: Round.
NEMA 23 18.9 kg-cm
Features
- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 189 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm.
NEMA 23 10.1 kg-cm
Features
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
Stepper Motor NEMA 34 87 kg-cm Hybrid Bipolar
Features
- Step Angle Step Angle: 1.8 °
- Current: 5 A/Phase
- Holding Torque: 870 N-cm
- Lead Wires: 4
- Shaft diameter: 14 mm.
Minebea 16PU-M202 Bipolar Stepper Motor
Features
- Step angle 3.75 degree
- Phase current: 0.6 ampere
- Step Angle: 3.75 Degree +/- 5%
- Drive Sequence: Bipolar
- Rated Current per Winding: 0.6 A
- Winding Resistance: 5E5
- Holding Torque Nm (Kg-cm): 0.064 (0.65)
- Rotor Inertia (Kg-cm2): 0.015
- Rated Voltage: Max 40V DC, 12V Typical
- Flange Size: 56.5 mm.
NEMA 17 5.5 kgcm
Features
- Step Angle: 1.8°.
- Current: 1.5 A /Phase.
- Holding Torque: 5.5 kg-cm.
- Detent Torque: 2.6 kg-cm
- Weight – 360 gm.
5V step motor 28BYJ-48-5V
Features
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm.
5V step motor 28BYJ-48-ULN2003
Features
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm.
9v 200ma
Features
- Quality custom-design solar energy panel
- The solar cells are encased and protected by a durable outer poly frame
- Polycrystalline solar cells
- Max output power: 1.8W
- Max power voltage: 9V
- Max power current: 200mA
- Open circuit voltage: 10.8v
- Short circuit current: 220mA
- Small Epoxy Solar Panels are simple to install or add to your existing product.
- Construction requires no frame or special modifications
- Small space required for installation.
9v 100mA
Features
- Quality custom-design solar energy panel
- The solar cells are encased and protected by a durable outer poly frame
- Polycrystalline solar cells
- Max output power: 1.08W
- Max working voltage: 9.9V
- Max charging current: 110mA
- Min output power: 0.9W
- Min working voltage: 9V
- Min charging current: 100mA.
6v 80ma
Features
- 100% new high quality.
- 6 volt 80ma polycrystalline solar panel
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- A unique technique to prevent water frozen within the deforming framework.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
- Construction requires no frame or special modifications
- Small space required for installation.
6v 540ma
Features
- Poly crystalline solar cells
- Max output power (without load): 3.23W
- Max working voltage (without load): 6.6V
- Max charging current (without load): 540mA
- Min output power (without load): 3.2W
- Min working voltage (without load): 6V
- Small Epoxy Solar Panels are simple to install or add to your existing product.
- Construction requires no frame or special modifications
- Small space required for installation.
- Has 2 to 3 times the power of amorphous thin-film solar panels
- Ready to use, they require no frame or special modifications.
- For connection, just solder or crimp to the copper tape.
- Dimension: 23.3 X 11.5 Cm Thickness 3mm +/- 2 mm.
6v 300mA
Features
- Max output power: 3.23W
- Max working voltage: 6.6V
- Max charging current: 490mA
- Min output power: 2.7W
- Min working voltage: 6V
- Min charging current: 450mA
- Small Epoxy Solar Panels are simple to install or add to your existing product
- Construction requires no frame or special modifications
- Small space required for installation.
- Has 2 to 3 times the power of amorphous thin-film solar panels
- Ready to use, they require no frame or special modifications.
- For connection, just solder or crimp to the copper tape.
6v 200mA
Features
- Polycrystalline solar cell
- Max output power: 1.1W
- Max working voltage: 6.6V
- Max charging current: 110mA
- Min output power: 0.6W
- Min working voltage: 6V
- Min charging current:200mA
- Small Epoxy Solar Panels are simple to install or add to your existing product
- Construction requires no frame or special modifications
- Small space required for installation.
6v 100mA
Features
Best in Class conversion efficiency
Anti-reflective coating for more light absorption
Optically, mechanically and electrically tested
Dimension : 88x 55mm
40W solar panel
Features
- Max Power at STC: 30W
- Short Circuit Current : 1.70A
- Optimum Operating Current : 1.60A
- Open Circuit Voltage : 22.9V
- Opitmum Operating Voltage : 19.5V
- Operating Temperature: -40ºC to 90ºC.
3v 300mA
Features
- Quality custom-design solar energy panel
- Max output power (without load): 0.45W
- Max working voltage (without load): 3.3V
- Max charging current (without load): 150mA
- Min output power (without load): 0.45W
- Min working voltage (without load): 3V
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- A+ Grade, anti PID Poly Crystalline cell.
3v 150ma
Features
Best in Class conversion efficiency
Anti-reflective coating for more light absorption
Optically, mechanically and electrically tested
Dimension : 72 x 45 mm
20W solar panel
Features
- Output Power: 20 Watts
- Operating Voltage: 12 Volt
- Wattage (Wp): 20
- Voltage at Max Power: 18.20 volts
- Current at Max Power: 1.10 amps
- Open Circuit Voltage: 22.40 volts
- Short Circuit Current: 1.45AL
12v 200ma Solar panel
Features
- Output voltage：12V
- Output current: 200mA
- Service life: more than 5 years
- High transfer efficiency
- Non-pollution and reproducible
- 2.4-watt polycrystalline solar panel
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
10W solar panel
Features
- 12 volt 10-watt polycrystalline solar panel USB charging.
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- A unique technique to prevent water frozen within the deforming framework.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
SG 90
Features
- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm.
SG5010
Features
- Model: SG5010
- Weight: 39 gm
- Operating voltage: 4.8V~ 6V
- Servo Plug: JR
- Stall torque @4.8V : 5.5kg-cm
- Stall torque @6.6V : 6.5kg-cm.
MG996
Features
- Operating Voltage: 4.8-6.6 V
- Angle of rotation: 180 degrees
- Temperature Range: 0- 55º
- Servo wire length: 32cm
- Servo Plug: JR (Fits JR and Futaba)
- Gear Type: Metal gear.
MG995 Servo Motor (180 degree)
Features
- Model: MG995
- Weight: 55 gm
- Operating voltage: 4.8V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 13kg-cm
- Stall torque @6.6V : 15kg-cm
MG995 (360 degree)
Features
- Model: MG995
- Weight: 55 gm
- Operating voltage: 4.8V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 13kg-cm
- Stall torque @6.6V : 15kg-cm
MG90
Features
- Dimensions: 23 x 12.2 x 29mm
- Operating Speed (4.8V no load): 0.11sec / 60 degrees
- Operating Speed (6.0V no load): 0.10sec / 60 degrees
- Stall Torque (4.8V): 2.0 kg/cm
- Stall Torque (6.0V): 2.5 kg/cm
- Temperature Range: 0 to 55 degree C
- Rotation angle: 360 °
- Dead Band Width: 15 Microsecond
- Operation Voltage: 4.8 – 6.0 Volts
- Recommend Model: Mini Car / Mini Ship /Helicopter & Airplane.
3.7 G
Features
- Operating Speed (4.8V no load): 0.1sec/60 degrees
- Stall Torque (4.8V): 8.32oz/in (0.6 kg/cm)
- Temperature Range: -30 to +60 Degree C
- Operating Voltage: 4.8-7.2 Volts
- Colour: Blue.
Magnetic Door Open Sensor – N/C Type
Features
- Actuation Distance : 15 – 25 mm;
- Connecting cable length: 30 cm.
- Magnetic sensor alarm, control the switch of the circuit via the built-in magnet
- Alarm when someone intrudes into your places
- Can be used in places like apartment, hotel, office, etc.
YF-S403 3/4 “ Water Flow Sensor
Features
- Working voltage range: DC 5 – 18V.
- Load capacity: ≤ 10 mA (DC 5V).
- Working temperature: ≤ 80 ℃
- Lightweight, small size, easy to install.
- Inlaid with stainless steel impeller shaft, durable wearable.
- The seal ring with the upper and lower force structure never leaks.
- Non-violent shock, and chemical erosion.
YF-S401 PVC Water Flow sensor
Features
- Operating Voltage: 5-12VDC
- Operating Current: 15mA
- Insulation Resistance >100MOhm
- Nozzle Size: 1/8.
Ultrasonic module waterproof
Features
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
Water Level Sensor
Features
- Operating voltage: DC3-5V
- Operating current: less than 20mA
- Sensor Type: Analog
- Detection Area: 40mmx16mm
- Operating temperature: 10℃-30℃
- Humidity: 10% -90% non-condensing.
DN40 – 1.5” Water Flow Sensor
Features
- Good Quality Water Flow Sensor
- Operating Voltage: 12VDC
- Flow Range: 1-60L/Min
- Suitable for Water Pressure Below 1.75MPa
YF-S201 ½” Water Flow Sensor
Features
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
- Max current draw: 15mA @ 5V.
- Working Flow Rate: 1 to 30 Liters/Minute.
- Maximum water pressure: 2.0 MPa.
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
Water Float Sensor P43
Features
- Contact Rating: 10W
- Switching Voltage: 100V
- Max Switching Voltage: 220V
- Switching Current: 0.5A
- Max Switching Current: 1.5A