It is made from brass and very reliable in linear motion applications.
This will provide easy to install and convenient to use.
JF-0630B DC 24 V 300mA 10mm 6N Push Pull Solenoid Electromagnet
Features:-
- Model: DC 24V 10mm 0.3N
- Rated Operating Voltage (VDC): 24
- Operation Mode: Push-Pull (Normally Closed)
- Holding Force: 0.3 N
- Weight:43 gm.
JLB J3 Speed
JLB Racing J3 SPEED is a marvelous 1: 10 scale off-road RC truggy that can bring you the unprecedented sensation of driving at over 100km/h. This is because the 4000mAh 30C LiPo battery can discharge at up to 120A, which can take full advantage of the HOBBYWING 120A ESC and make the motor rotate furiously.
Johnson A 10 rpm
Features
- Base Motor RPM: 18000
- Operating Voltage: 6-18 V
- Rated Voltage: 12 V
- Rated Torque: 472.6 N-cm
- Stall Torque: 2250 N-cm
- Gearbox Dimensions: 29×37 (LxW) mm
Johnson A 100 rpm
Features
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 100 |
| Rated Torque (kg-cm) | 12 |
| Stall Torque (kg-cm) | 35 |
| No-Load Current | 300 mA |
Johnson A 200 rpm
Features
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 200 |
| Rated Torque (kg-cm) | 8 |
| Stall Torque (kg-cm) | 32 |
| No-Load Current | 300 mA |
| Load Current(A) | 3 |
| Shaft Diameter (mm) | 6 |
| Shaft Length (mm) | 30 |
Johnson A 30 rpm
Features
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 30 |
| Rated Torque (kg-cm) | 20 |
| Stall Torque (kg-cm) | 45 |
| No-Load Current | 300 mA |
| Load Current(A) | 3 |
Johnson A 300 rpm
Features
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 30 |
| Rated Torque (kg-cm) | 20 |
| Stall Torque (kg-cm) | 45 |
| No-Load Current | 300 mA |
| Load Current(A) | 3 |
Johnson A 600 rpm
Features
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 600 |
| Rated Torque (kg-cm) | 20 |
| Stall Torque (kg-cm) | 45 |
| No-Load Current | 300 mA |
| Load Current(A) | 3 |
Johnson B 10 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 10 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 12 |
| Stall Torque(Kg-Cm) | 20 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
Johnson B 100 rpm
Features
Power Supply: 12V DC
RPM: 100
Rated Torque: 5.7 Kg-cm
6mm Dia shaft with M3 thread hole
Gearbox diameter: 37 mm
Motor Diameter: 28.5 mm
Length without shaft: 63 mm
Johnson B 1000 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 1000 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 1 |
| Stall Torque(Kg-Cm) | 4 |
| No-Load Current | 200 mA |
Johnson B 150 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 150 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 5 |
| Stall Torque(Kg-Cm) | 10 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
| Shaft Diameter (mm) | 6 |
Johnson B 200 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 200 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 3.5 |
| Stall Torque(Kg-Cm) | 10 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
| Shaft Diameter (mm) | 6 |
| Shaft Length (mm) | 25 |
Johnson B 30 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 30 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 10 |
| Stall Torque(Kg-Cm) | 18 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
| Shaft Diameter (mm) | 6 |
Johnson B 300 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 300 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 2.5 |
| Stall Torque(Kg-Cm) | 8 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
Johnson B 500 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 500 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 2.5 |
| Stall Torque(Kg-Cm) | 8 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
Johnson B 60 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 60 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 2.5 |
| Stall Torque(Kg-Cm) | 8 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
Joystick Module
Features
- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
JX PS-5521MG 20KG Large Torque Metal Gear Standrd Analog Servo
Features:
- Name: PS-5521MG Analog Servo
- Maximum Angle: 90°
- Gear: Metal
- Operating Voltage:4.8V-6V
- Dead band: 7µs 1520µs / 50hz
- Operating Speed (4.8V): 0.18 sec/60°
- Operating Speed (6V): 0.16 sec/60°
- Stall Torque (4.8V): 17.25 kg.cm (239.55oz/in)
- Stall Torque (6V): 20.32 kg-cm (281.89 oz/in)
- Connector Wire Length: JR 265 mm (10.43in)
- Bearing: 2BB
- Dimension: 40.5×40.3x20mm
- Weight: 85.
Key Fob 13.56mhz
Feature
- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 13.56MHz
- Chip type: FM1108 Fudan Chip
- Memory capacity: 8 kbit
- Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
KFL08 Zinc Alloy Pillow Block Flange Bearing 8mm Inner Diameter Flange Bearing
Features:-
- Model Number: KFL08
- Material: Zinc Alloy
- Inner diameter: 8mm
- Length: 48mm
- Height: 12mm
- Weight: 26.4g.
KFL08 Zinc Alloy Pillow Block Flange Bearing 8mm Inner Diameter Flange Bearing
Features:-
- Model Number: KFL08
- Material: Zinc Alloy
- Inner diameter: 8mm
- Length: 48mm
- Height: 12mm
- Weight: 26.4g.
KK Mini
Features
- IC: Atmega644 PA
- Gyro/Accelerometer: Auto-level: Yes
- Input Voltage: 4.8-6.0V
- AVR interface: standard 6 pins.
- The signal from Receiver: 1520us (5 channels)
- Signal to ESC: 1520us
- LCD size: 24*18mm
- Mini buttons size: Four 3.3*4.2mm
- Mounting holes: 30.5×30.5mm
- Voltage sensor: One red positive pin header for.
- Input rail: Single row 2.54mm pitch pin header for input signal
- Firmware Version: 1.6
- Dimension: 36x36x11.5mm
KK2.1.5 Flight Control
Features
- IC: Atmega644 PA
- Gyro/Acc: 6050MPU
- Input Voltage: 4.8V~6.0V
- AVR Interface: Standard 6 Pin
- Signal From Receiver: 1520us(5 channels)
- Signal to ESC: 1520 us
L293 Motor Driver
Features
- Maximum motor supply voltage: 36V
- Maximum motor supply current: 600 mA per motor
- Onboard Heatsink for better performance
- The driver two holes of 3mm diameter for easy mounting
L293 Motor Driver Shield
Features
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
L298 Motor Driver Chinese
Features
- Logical Voltage: 5V
- Drive Voltage: 5V-35V
- Logical Current: 0-36mA
- Drive Current: 2A (max. single bridge)
- Max Power: 25W
- Dimensions: 44 x 44 x 28 (LxWxH)mm
- Weight: 26 gm
L298P Motor Shield motor driver
Features
- L298P based Arduino motor driver shield
- Onboard Buzzer (D4).
- Onboard Bluetooth interface, you can directly plug, no wiring required.
- Six Analog interface.
- Forward, Backward steering indicators
Landing Gear
Features
- Color: black
- Material: ABS Plastic
- Length: 200mm
- Ground Clearance: 150 mm
- Compatibility: Q450 and S500 Frames
- Weight: 75 (each landing gear)
Landing Gear Wheel Stop Set Collar 6×2.1mm 4 Sets
Landing Gear Wheel Stop Set Collar 6×2.1mm 4 Sets
LDR Module
Features
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
LDR Sensor
Features
- Diameter: 3mm
- No. of Pins: 2
- Type of Mounting: PCB Through Hole
- Maximum Operating Temperature: -30 to +70°C (Approx.)
- Dark resistance:5 Mohm
Lead Copper Nut 8mm PR40
This is 3d Printer CNC Lead Copper Nut for 8mm Screw. It is used with 8mm Lead Screw in general machine tools such as 3D printing.
Leadshine DM320C
Features
- Anti-Resonance, provides optimum torque and nulls mid-range instability
- Motor self-test and parameter auto-setup technology, offers optimum responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
- Microstep resolutions programmable, from full-step to 102,400 steps/rev(Note1)
- Supply voltage up to 30 VDC
- Output current programmable, from 0.3A to 2.0A( Note)
- Pulse input frequency up to 70 KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors.
Leadshine DM542
Features
- Good high-speed performance
- Supply voltage up to +50VDC
- Output current up to 4.2A
- Pulse frequency up to 300 KHz
- Automatic idle-current reduction
- 3-state current control technology
- Self-adjustment technology
- Pure-sinusoidal current control technology.
Leadshine DMA860E Stepper motor driver
Features:
- Model: DMA860E.
- Control Mode: Step & Direction.
- Max Input Frequency: 200 kHz.
- Input Voltage Range: 18 – 80 VAC / 24 – 110 VDC.
- Suggested Power Supply Voltage Range: 36-90 VDC /24-60 VAC.
- Number of DIP Switch Resolution Configurations: 16.
- 16 selectable micro-step resolutions of 400-51,200 via DIP switches.
- 8 selectable output current settings of 2.4 – 7.2A via DIP switches.
- Logic Current Range: 7-16mA (10mA typical).
- Logic Voltage Range: 4-5 VDC for pulse active high (default), or 0-0.5V for pulse active low.
- Pulse enabled at: Rising edge.