GT2 20 tooth bore 6.35mm width 10mm pulley
Features:
- Material: Aluminum.
- Number of teeth: 20.
- Pitch: 2mm (GT2)
- Bore diameter: 6.35mm
- Belt width: 10mm.
- Outside diameter: 16mm
- Length: 19.5mm.
- Weight: 10 gm.
GT2 20 tooth bore 8mm for width 6mm belt
Features:
- Material: Aluminum.
- of teeth: 20.
- Outer Diameter: 16mm.
- Inner Diameter: 8mm.
- Length: 16 mm.
- Weight: 10 gm.
GT2 20 tooth bore 8mm width 10mm pulley
Features:
- Material: Aluminum.
- Number of teeth: 20.
- Pitch: 2mm (GT2)
- Bore diameter: 8mm
- Belt width: 10mm.
- Inner Diameter: 8mm.
- Outside diameter: 14mm
- Length: 18.1mm.
- Weight: 10 gm.
GT2 Belt PR60
Highest quality precision 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer. Made from NEOPRENE – Synthetic Rubber reinforced with fiberglass cords for superior strength. Neoprene – an oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930.
GY – 50 L3G4200D 3 – axis Gyroscope/ Gyro Sensor Module for Arduino
Features:-
- Sensor type – Gyroscope, 3 axes.
- Voltage Supply – 2.4 V – 3.6 V.
- IC – L3G4200D.
- Communication Mode: IIC / SPI communications protocol
- Sensing Range – Three selectable full scales (250/500/2000 DPS).
- 16-bit rate value data output
- 8-bit temperature data output
- 32 count FIFO buffer
- Output Lines – Two Digital Output Lines (Interrupt and data ready).
- Operating Temperature: -40 to +85 °c
- Integrated low and high pass filters with user-selectable bandwidth
- Embedded self-test.
GY-906 MLX90614ESF Contactless Temperature Sensor Module
Features
- Operating Voltage(V): 3- 5
- Operating Current(mA): 2
- Communication protocol: I2C
- Power saving mode
- Automotive grad
- Small size, low cost
Hall Effect Sensor A1104
Features
- BCD Technology
- Latch Switch
- 2.8~24V Operating Vcc Range
- -40~150C Operating Temperature
- Magnetic Sensitivity Option: (BOP=20Gs, BRP=-20Gs)
- Open-Drain Output
- -27V Reversed Power Supply Protection
- Output Limiting Current Protection
- RoHS Compliant: (EU)2015/863
HC-05 Module
Feature
- Bluetooth protocol: Bluetooth Specification v2.0+EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying).
- Emission power: =4dBm, Class 2.
- Sensitivity: =-84dBm at 0.1% BER.
HC-12 433 SI4463 Wireless Serial Module Remote 1000M With Antenna
Features:
- Operating Frequency Range: 433.4—473.0MHz
- Transmit Power Max: 20dBm
- Power Supply Voltage: DC 3.2V ~5.5V
- Long Communication Distance: About 1000 meters at the default setting.
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
Features:-
- Automatic induction: to enter the sensing range
- Ultra-small size.
- Repeatable trigger
- Wide operating voltage range
- Micropower: quiescent current <50
- Output high signal: easy docking and all kinds of circuits.
Heart beat Sensor
Features
- Use IR LED and an optical transistor to detect pulsation in fingers
- Small and Compact module
- Easy to use.
Hi-link HLK-5M03 100-240 VAC to 5 VDC/3W Power Supply Module
Features:
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- Rated input voltage 100-240 VAc
- Input voltage range 90-264 VAc
- Maximum input current: 0.2 A
- Input current surge: 10 A
- Maximum Input voltage: 270 VAc
- Enter slow start:50 mS
- Input Low Voltage Efficiency Vin=110VAc,Output full-load?69 %
- Input High Voltage Efficiency Vin=220VAc,output full-load?70 %
- Long-term reliability: MTBF 100000h.
Hi-link HLK-5M12 100-240 VAC to 5 VDC/5W Power Supply Module
Features:
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test.
HK-300 (2.5W) submersible mini water pump AC 220V-240V
Features
- Rated Voltage : AC 220V-240V
- Power:2.5W
- Pumping head : 0.5 m(1.64Ft)
- Pump Size: 90 * 40 * 35mm
- Fluid: 0-100 ° C
- Life: up to 10000 Hours
- Maximum flow rate of up to 180L/H(47.55G/H)
- Efficiency: 90%
- Operation temperature: ≤69degC
HLK-RM04 Uart WIFI with External Antenna
Features:
- 2.4GHz 802.11b/g/n,compatible
- Support IEEE 802.3、IEEE 802.3u
- WiFi Client/AP/Router Mode
- Support WPS/WDS
- The range of baudrate: 1200~500000bps.
HLK-SW16 16 Channel WiFi Controlled Relay Board
Features
- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
HM-10 BLE 4.0 CC2540
Feature
- Bluetooth Protocol: Bluetooth Specification V4.0 BLE
- USB Protocol: USB V2.0
- Operating Frequency: 2.4GHz ISM band
- Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
- Transmitting Power: ≤4dBm
- Sensitivity: ≤-84dBm at 0.1% BER
- It’s easy to use and completely encapsulated.
- You can set it as slave or master.
- You can use AT command set the baud rate.
HMC5883L COMPASS
Features
- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage: 3 -5 V DC.
- Driver Chip: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
HX 711 Module
Features
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution: 24 bit.
Hyper Go 14301 1/14 (ONROAD)
- Standard 2S battery 42km/h,Support for you to upgrade 3S battery,max speed upto 55km/h
- 45A independent brushless ESC + 2845 3700KV four-pole brushless motor
- All-metal transmission system (metal gear differential)
- All-metal hydraulic shock absorber, Metal anti-collision head
Hyper Go 14302 1/14 (ONROAD)
- Standard 2S battery 42km/h,Support for you to upgrade 3S battery,max speed upto 55km/h
- 45A independent brushless ESC + 2845 3700KV four-pole brushless motor
- All-metal transmission system (metal gear differential)
- All-metal hydraulic shock absorber, Metal anti-collision head
Hyper Go MJX 16208 RC Truck
About this item
1. All-metal hydraulic shock absorber;
2. Support 3S battery (The original car comes with one 2S battery. 3S battery is not included);
3. 45A brushless ESC + 2845 four-pole brushless motor;
4. All-metal transmission system (metal gear differential);
5. Standard independent receiver, easy to modify.
Hyper Go MJX 16209 RC Truck
Packing list: Buggy*1, Remote control*1, battery*1; rear wing*1; Manual*1; USB charging cable*1; Hexagon wrench*1; Head-up wheel accessories*1; Screwdriver*1
Configure: Motor Specifications: 2845 4200KV Brushless Motor, Motor cool-ing aluminum heat sink + cool-ing fan, ESC 45A brushless ESC (metal heat sink), Servo specification 17g digital servo, Remote control 2.4G, Remote control battery AA*2, Battery Specifications 7.4V 1050mAh 25C
Features:1. All-metal hydraulic Sho-ck absorber; 2. Standard 1050mah battery and reach a maximum speed of 45km/h; 3. 45A independent brushless ESC + 2845 four-pole brushless motor; 4. All-metal transmission system (metal gear differential); 5. Standard independent receiver, easy to modify. ” 6. Bluetooth Two-way transmission GPS Upgrade Kit (HG-T22) (Optional Upgraded Parts, Not included)
Basic parameters : Product model: 16208/16209/16210, Scale 1/16, Maximum speed 45km/h, Remote control distance 60-80m, Maximum use time 10min, Charging time 2h (using 5V 2A charger), Charging method USB charging cable
Dimensions and Specifications: Product size (mm) 310x222x110, Wheelbase (mm) 174mm, Wheel base (mm) 182mm, Tire diameter (mm) 83mm, Vehicle weight 1030g
Hyper Go MJX 16210, 1/16 Brushless RC 4WD High Speed Off-Road Buggy Truck
Hyper Go MJX 16210, 1/16 Brushless RC 4WD High Speed Off-Road Buggy Truck
I2C Module
Features
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
IMAX B3 Charger
Features
- Input Voltage(AC): 100- 240v
- Battery Type: LiPo (Lithium Polymer)
- Balance Charge Current: 840mA
- Output Current: 3 x 800mA
- Power Plug: EU Plug or US Plug
- Dimensions: 92*59*35.5mm
- Case Material: ABS
iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER
Features
- Input Voltage: 11~18v
- Circuit Power: Max Charge 50W – Max Discharge 5W
- Charge Current Range: 0.1~5.0A
- Discharge Current Range: 0.1~1.0A
- NiMH/NiCd Cells: 1~15
- LiIon/LiPoly Cells: 1~6
- Pb Battery Voltage: 2~20v
- Weight: 277g
- Dimensions: 133x87x33mm
iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER
B6 Digital LCD RC Lipo NiMh Battery Balance Charger (Blue)
IMAX B6-AC Lipo NiMH Battery Charger/Discharger 1-6 Cells
Features
- AC 100~240v or 12V DC input
- The cables come with a fitted fuse.
- Microprocessor controlled
- Li-ion, LiPo, and LiFe capable
- Input voltage monitoring. (Protects car batteries at the field)
- Battery break-in and cycling feature
- Data storage (Store up to 5 packs in memory)
- Internal resistance checker to see pack health
- Delta-peak sensitivity
- Individual cell balancing
Ina219 I2C BiDirectional Dc Current Power Supply Sensor Breakout Module
Features
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
IR Infrared Obstacle (Imported)
Features
- Detection distance: 2-40cm
- IO Interface: 4-wire interfaces (- / + / S / EN)
- Output signal: TTL level
- Adjustment: adjust multi-turn resistance
- Effective angle: 35 .
IR LED Sensor
Features
- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
IR Sensor Array of 8
Features
- Power: 3.3 – 5V
- Detector spacing: 16mm
- Mounting holes size: 3mm
- Detection range: 1 – 5cm
IRF520 MOS FET Driver Module Sensor
Features
| Operating Voltage(VDC) | 3.3 to 5 |
| Ports | Digital Level |
| Output load voltage(V) | 0 to 24 |
| Output load current(A) | <5 (1A above need to add heat sink) |
| Platform | Arduino, MCU, ARM, Raspberry PI |
| Length (mm) | 34 |
| Width (mm) | 30 |
| Height (mm) | 18 |
| Weight (gm) | 10 |
ISD1760 MODULE (75 SEC)
Features
- On-board ISD1760 chip
- Operating voltage: 5v
- 75 sec of audio playback
- Onboard microphone for direct recording
- Frequency: 6KHz or 8KHz
- Recording time: 6K/75 sec, 8K/60 sec
- Output all pin for chip control
- Easy interface with microcontrollers using 2.54mm spaced male pin headers
- High-quality natural voice reduction
- LED status indication
ISD1820 MODULE (10 SEC)
Features
- Operating voltage: 2.6v to 5v
- Record and playback up to 10 sec
- Push-button and microcontroller controllable AGC circuit added tom increase audio playback volume
- Recording time: 8- 20 sec
- Built-in microphone
- On-chip 8-ohm speaker driver
- High quality, natural voice restored
- Available single-chip control audio recording control mode: the key to control or microcontroller, IO has drawn the line of control
- Can be used as propaganda module
- Auto power down mode
- Duration and sample rate can be extended to 20 sec by varying resistance
- Dimension: 43*34*11mm