ENC28J0 Module
Features
- ENC28J60 Ethernet Module
- HanRun HR911105A Ethernet port
- 5V supply voltage
- 100% Genuine ENC28J60 Chipset, compatible with Arduino etc.
- 25MHz Crystal.
- Standard HanRun HR911105A Ethernet Interface.
ESP-WROOM-32 universal WiFi-BT-BLE MCU module
Features:
- CPU and Memory: Xtensa® 32-bit LX6 Dual-core processor, up to 600 DMIPS.
- 448 KByte ROM
- 520 KByte SRAM
- 16 KByte SRAM in RTC.
- QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
- Supply Voltage: 3V~3.6V.
ESP8266 ESP – 03
Features
- 802.11 b/g/n
- Ceramic Antenna
- Wi-Fi Direct (P2P), soft-AP
- Stack TCP/IP integrated
- + 19.5dBm output power in 802.11b
- SDIO 1.1/2.0, SPI, UART
- STBC, 1 x 1 MIMO, 2 x 1 MIMO
- A-MPDU & A-MSDU aggregation & 0,4 ms guard interval
- Wake up and packets trasmission: < 2ms
- Integrates WEP, TKIP, AES e WAPI
- Communication interface voltage: 3,3 Vdc.
ESP8266 ESP – 07
Feature
- The smallest 802.11b/g/n Wi-Fi SOC module
- Up to 160MHz clock speed
- Built-in 10 bit high precision ADC
- Supports UART/GPIO/IIC/PWM/ADC
- Integrated Wi-Fi MAC/BB/RF/PA/LNA.
ESP8266 ESP-12E
Features
- 802.11 b/g/n
- Integrated low power 32-bit MCU
- Integrated 10-bit ADC
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, and power management units
- Supports antenna diversity
- Wi-Fi 2.4 GHz, support WPA/WPA2
- Support STA/AP/STA+AP operation modes
- Support Smart Link Function for both Android and iOS devices
- Support Smart Link Function for both Android and iOS devices
- SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIO
- STBC, 11 MIMO, 21 MIMO.
ESP8266 ESP-12F
Features
- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units.
ESP8266 ESP-13
Features
- 32-bit RISC architecture
- The processor can operate at 80MHz / 160MHz
- 32MB flash memory
- 64kB for instructions
- 96kB for data
- Standard native WiFi 802.11b / g / n
- Operates in AP, Station or AP + Station mode.
ESP8266 WIFI Shield
Features
- Open source IoT Platform
- Easily Programmable
- Low cost & Simple to Implement
- WI-FI enabled
ESP8266-01 5V Wifi Relay Module TOI APP Controled For Smart Home Automation
Features
- Onboad module: ESP2866 WIFI module
- Onboard relay: 5v.10a/250v ac, 10a/30v dc
- Can connect 5 clients at the same time on AP mode
- The module has two work modes: Cell phone, carry on Wi-Fi module and Cell phone and Wi-Fi module carry on the same router
- Used in mobile phone, Wi-Fi module equipped with one router and control relay by APP
- Maximum transmission distance of 400 m when cell phone carry on wifi module directly, in the open environment
- Transmission distance depends on routers signal intensity when wifi and cell phone is carrying on the same router
ESP8266-12E 10A 220V Network Relay WIFI Module Input DC 7V~30V
Features
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
eSun ABS+ 1.75mm 3D Printing Filament 1kg
Tougher and stronger
Less warping (about 0.4% compared to over 8% in regular ABS)
Prints smoother & smoother printed objects
Better scratch, heat and oil resistance
Can be polished using acetone
Can be easily colored.
eSun eABS Max 1.75mm 3D Printing Filament 1Kg – Black
The appearance is black, nontransparent.
Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant.
Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.
Allow acetone polishing for appearance.
Ethernet Shield
Features
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Compatible with the for Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560)
Evaluation Board For PI
Features
- DVK512 x 1
- USB type A plug to mini-B plug cable x 1
- 4-pin 2-pin wires pack x 1
- RPi screws pack (2pcs) x 1
F450 Frame
Features
- Made by advanced engineering material, super strong & smooth
- Easy to assemble and disassemble.
- The frame is tough and durable.
- The main glass fiber frame has good strength.
- The arm equips support ridges for better and faster forward flight.
- Features pre-threaded brass sleeves.
- In-built power distribution board.
F550 Frame
Features
- Model: F550
- Frame Weight: 620gm(including landing gear)
- Moter Mounting Hole Diameter: 3 mm
- Landing Gear Material: ABS
- Arm Size: 220 x 55 mm
- Landing Gear Length: 200mm
- Takeoff weight: 1200-2400 grams
FEETECH FS6535M 33KG High Torque Analog Servo FOR large scale big rc Robot – FS6535M
Features:
- Operating Voltage:4.8-6Volts
- Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
- Stalling current: 3.8 A.
- No-load speed: 0.27±0.03(sec/60°).
- Direction: CCW.
- Operating Angle: 180degree.
- Required Pulse: 500us-2500us.
- Bearing Type: 2BB.
- Gear Type: Metal.
- Motor Type: Carbon.
FEETECH FT5335M 35kgcm Ultra-High-Torque, High-Voltage Digital Giant Servo
Features:
- Digital Giant Servo
- Ultra-high Torque, High voltage
- Speed @ 7.4V: 0.18 sec/60°
- Stall torque @ 7.4V: 40 kg.cm
- Speed @ 6V: 0.20 sec/60°
- Stall torque @ 6V: 35 kg.cm
- Lead length: 12 inch
- Servo horns and associated hardware are included
- Dimension: 62.8 × 32.5 × 55.9 mm.
- Weight: 180 g.
FEETECH FT6560M 65kg Large Scale High Torque Servo
Features:
- Model: FT6560M.
- Operating Speed6.0v 0.15 sec/60°.
- Operating Speed7.4v 0.13 sec/60°.
- Stall Torque 6.0v 48 kg.cm.
- Stall Torque 7.4v 62 kg.cm.
- Motor: carbon.
- Control Way: Digital.
- Cable Length: 20cm.
- Gear: 5 metal gears.
- Bearing: 2BB.
- Dead band: 4us.
Female to Female Jumper wires
Features
- Length: 20cm
- Quantity: 10pcs
- 1p -1p pin female to female header
- Compatible with 2.54mm spacing pin headers
Finger Print Module Scanner – TTL (GT-521F52)
Features:-
- Simple UART & USB communication protocol.
- Complies with USB 2.0 full-speed specification.
- Ultra-thin optical sensor.
- Resolution 450 dpi.
- Capable of 360° recognition.
- Storage for 3,000 unique fingerprints.
- Wake up on Finger Function.
- Works well with dry, moist or rough fingerprints.
- Anti-scratch with surface high hardness ≧
- 1:1 verification, 1:N identification.
- High accuracy and high-speed fingerprint identification technology.
Finger Print R305
Features
- Operating voltage (v): 4.2 ~ 6 VDC
- Current consumption: ≤75mA
- Verification Speed: 0.2 sec
- Scanning Speed: 0.3 sec
- Character file size: 256 bytes
- Template size: 512 bytes
Finger print Scanner Module – TTL (GT-521F32)
Features:-
- Finger window: 12.9 x 16.9 mm.
- Image Size: 258 x 202 Pixels.
- Storage capacity: 200 fingerprints.
- Wake up on Finger Function.
- Anti-Scratch with surface high hardness ≧ 5H.
- Resolution: 450 dpi.
- CPU: ARM Cortex M3 Core MCU).
Fingerprint GT511c3 TTL
Features
- High-Speed, High-Accuracy Fingerprint Identification using the SmackFinger 3.0 Algorithm
- Read and Write Fingerprint Templates and Databases
- Simple UART protocol (Default 9600 baud)
- Capable of 1:1 Verification and 1:N Identification
- 360° Fingerprint Recognition
Flame Sensor
Features
- Spectrum range: 760nm ~ 1100nm
- Detection angle: 0 – 60 degree
- Power: 3.3V ~ 5.3V
- Operating temperature: -25℃ ~ 85℃
- Dimension: 27.3mm * 15.4mm
- Mounting holes size: 2.0mm
Flex Sensor 2.2”
Features
- Flex length: 5.6 cm.
- Total Length: 2.2″ (7 cm).
- Life Cycle : >1 million.
- Height : 0.43mm (0.017″),
- Flat Resistance: 10K Ohms ±30%.
- Power Rating: 0.5 Watts.
Flex Sensor 4.5”
Features
- Angle Displacement Measurement
- Bends and Flexes physically with motion device
- Simple Construction
FlexiForce Tekscan A101 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
FlexiForce Tekscan A201 Sensor
Features:
- Thickness – 0.203 mm (0.008 in.).
- Length – 191 mm (7.5 in.)** (optional trimmed lengths: 152 mm (6 in.), 102 mm (4 in.), 51 mm (2 in.)).
- Width – 14 mm (0.55 in.).
- Sensing Area – 9.53 mm (0.375 in.) diameter.
- Connector – 3-pin Male Square Pin (center pin is inactive).
- Substrate – Polyester.
- Pin Spacing – 2.54 mm (0.1 in.).
- Standard Force Ranges – 445 N (0 – 100 lb).
- Temperature Range (Low) : -40 °C
- Temperature Range (High) : 60 °C
FlexiForce Tekscan A301 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter.
FlexiForce Tekscan A401 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
FlexiForce Tekscan A502 Sensor
Features:
- Thickness – 0.203 mm (0.008 in.).
- Length – 81.3 mm (3.20 in.)**.
- Width – 55.9 mm (2.20 in.).
- Sensing Area – 50.8 mm x 50.8 mm (2 in. x 2 in.).
- Connector – 2-pin Male Square Pin.
- Substrate – Polyester.
- Pin Spacing 2.54 mm (0.1 in.).
- Standard Force: 222 N.
- Temperature Range (Low): -40 °C.
- Temperature Range (High): 60 °C.
- Thin and flexible.
Floating Ball Valve Automatic Float Valve Water Level Control Valve F/ Water Tank Water Tower
Features:-
- Material: plastic
- Form: diaphragm type
- Connection form: thread
- Drive mode: float control
- Flow direction: one direction
- Nominal diameter:15mm
- Automatic control, less water from the fill, the water from the stop.
- Quarter of the inlet, a large amount of water.
- The appearance of fine, small size, practical, simple installation.
Floating Straight Automatic Water Level Control For Water Tank-14014449MG
Features:-
- Automatic Control, Low Self-Complementary Water, Water Full Automatic Stop.
- Four Intakes, Large Volume Of Water.
- Beautiful Appearance, Small Size, Practical, Simple Installation.
- Without Electricity, Easy To Use, Long Life, Low Failure Rate, Saving Water Resources.
- Working Pressure Range: 0.2-10Kg.
- Applicable Medium: Clean Water.
- Applicable Medium Temperature: ≤70degree C.
Flysky (only receiver)
Features
- No. of Channel: 6
- RF power: less than 20DBm
- modulation: GFSK
- Code type: PCM
- Sensitivity: 1024
- Low voltage warning: LED
Flysky CT6B 6 Channel
Features
- Model Type: Digital Radio Transceiver.
- Sensitivity: 1024.
- Bandwidth: 500 kHz.
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- No. of Channels: 6.
- Operating Voltage: 12V DC (1.5AA x 8 Battery).