16/2BLUE LCD Shield
Features
- Blue Backlight with white words
- uses 4 Bit Arduino LCD Library
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
- Operating Voltage is 5V
A1 Universal Carbon Resistors & Rotary Potentiometers Parts Set for Arduino
Features:
- Material: FR4
- Resistor Type: Carbon
- Package Type: OEM
- Depth: 2.6 mm
- Height: 100 mm
- Width: 11 mm
- Weight: 2.2 g
Arduino Sensor Shield
Features
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
Arduino CNC Shield
Features
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Supports PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- Supports Coolant enable
Arduino Nano
Features
- Microcontroller Atmel ATmega328 SMD Package
- Operating Voltage (logic level) 5 V
- Input Voltage (recommended) 7-12 V
- Input Voltage (limits) 6-20 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 8
- DC Current per I/O Pin 40 mA
- Flash Memory 32 KB (of which 2KB used by bootloader)
- SRAM 2 KB
- EEPROM 1 KB
- Clock Speed 16 MHz
- Dimensions 0.70” x 1.70”
Arduino Uno
Features
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
Attiny 5 Version 1
Features
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
Attiny 5 Version 2
Features
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The On – board, 150 ma 5 v Regulator.
- Built – in USB and serial was debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Data Logger Shield
Features
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents possible damage to your SD card.
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for 2 years.
- Included libraries and example code for both SD and RTC mean you can get going quickly.
- Prototyping area for soldering connectors, circuitry or sensors.
ESP8266 WIFI Shield
Features
- Open source IoT Platform
- Easily Programmable
- Low cost & Simple to Implement
- WI-FI enabled
Ethernet Shield
Features
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Compatible with the for Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560)
L293 Motor Driver Shield
Features
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
L298P Motor Shield motor driver
Features
- L298P based Arduino motor driver shield
- Onboard Buzzer (D4).
- Onboard Bluetooth interface, you can directly plug, no wiring required.
- Six Analog interface.
- Forward, Backward steering indicators
Mega R3 +WiFi ATmega2560+ESP8266 Module CH340G Compatible For Arduino Mega
Features:-
- USB-TTL converter.
- Logic Level: 5V.
- Operating Supply Voltage: 5V.
- Digital I/O Pins: 14.
- Analog I/O Pins: 6.
NANO / UNO Multi-Purpose Expansion Board
Features
- Compatible with Arduino NANO.
- All digital and analog pins breakout.
- Compact size.
- External power supply current support.
- Leads all pins out, convenient for wiring and doing experiments.
Nano V3 Ethernet Shield
Features
- ENC28J60 Ethernet chips, SOP28 package
- SPI Interface
- 1×10 connector, can be easily mounted with the MCU
- Built-in isolation transformer RJ45 connectors HR911105A
- Power LED
- Single Supply: +3.3 V
- 25Mhz Crystal
- PCB size: 48×18 mm
Pro Micro 5V 16M Mini Microcontroller Development Board For Arduino
Features:-
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection.
Prototype Shield For UNO
Features
- It has a nice standard 0.1″x0.1″ prototying grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- A IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- 2 3mm general use LEDs, red and green, as well as 2 matching resistors
Robodo – Arduino Mega 2560 RFID starter kit learning suite V2
Features:
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB.
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in.
Robodo – Arduino RFID learning kit V4 with Instruction CD & Uno R3
Features:
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming.
- A variety of components are included in this pack to try out different projects.
Robodo – Arduino RFID learning kit V5 with Instruction CD & Uno SMD
Features:
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming.
- A variety of components are included in this pack to try out different projects.
Robodo – Basic Starter Kit for arduino Starter with UNO R3
Features:
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G.
Smart car kit Electronic kits DIY V3 with Ultrasonic Ranging car Bluetooth wireless control IR remote control
Features:
- Working voltage: 7V – 12V.
- Decelerate motors ratio 1:48, drive voltage 6V.
- Uses L298N driver module, real isolation to MCU.
- Three groups of hunt module(detects black and white lines), higher accuracy.
- Infrared remote communication module, composed of smart car to be remote control system.
- Bluetooth wireless communication module (short-range wireless remote control).
- With economic and environmentally friendly rechargeable battery and charger.
- Can be equipped with a variety of sensor modules, depending on your imagination to achieve a variety of functions.
STM32F103C8T6 ARM board
Features
- 2.0-3.6V power, I/O.
- Operating voltage:3.3V
- Analog inputs:10
- Digital I/O pins:37
- DC source/sink from I/O pins:6mA
- Flash memory (KB):64/128
- SRAM:20KB
- Frequency (clock speed):72MHz max.
- Communication:I2C, SPI, UART, CAN, USB
Super:bit expansion board for BBC Micro Bit Pocket Sized – Single Board Computer
Features:-
- Nordic Semiconductor nRF52833 processor
- Notched edge connector to make it easier to connect things like crocodile clips and also conductive thread.
- Power LED indicator in addition to the USB activity indicator.
- Gold plated antenna to easily identify the radio and Bluetooth component.
UNO R3 +WiFi ATmega328P+ESP8266 Module CH340G Compatible For Arduino Uno
Features:-
- USB-TTL converter.
- Logic Level: 5V.
- Operating Supply Voltage: 5V.
- Digital I/O Pins: 14.
- Analog I/O Pins: 6.
UNO R3 acrylic Case
Features
- Weight: 53 gm.
- Dimensions : 79.5 x 64.5 x 21 mm.
- Material: A grade acrylic sheet.
- For UNO R3 Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
USB Host Shield
Features
- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Operates over the extended -40C to +85C temperature range
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
Wemos D1 R2 WIFI ESP8266 Shield Arduino
This is WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board. The WeMos D1 is an ESP8266 WiFi based board that uses the Arduino layout with an operating voltage of 3.3V.
the board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.
XBEE Shield
Features
- Stackable design, easy to plug into the ARDUINO development board.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB 2.0 protocol.
- Bitbang mode ready.
- Easily connected to a PC via mini USB Cable.
- XBee-setting support software X-CTU.