Home Shop Page 9
Showing 289–324 of 1014 results
Features:
Name: PS-5521MG Analog Servo
Maximum Angle: 90°
Gear: Metal
Operating Voltage:4.8V-6V
Dead band: 7µs 1520µs / 50hz
Operating Speed (4.8V): 0.18 sec/60°
Operating Speed (6V): 0.16 sec/60°
Stall Torque (4.8V): 17.25 kg.cm (239.55oz/in)
Stall Torque (6V): 20.32 kg-cm (281.89 oz/in)
Connector Wire Length: JR 265 mm (10.43in)
Bearing: 2BB
Dimension: 40.5×40.3x20mm
Weight: 85.
Features
IC: Atmega644 PA
Gyro/Accelerometer: Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pins.
The signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
LCD size: 24*18mm
Mini buttons size: Four 3.3*4.2mm
Mounting holes: 30.5×30.5mm
Voltage sensor: One red positive pin header for.
Input rail: Single row 2.54mm pitch pin header for input signal
Firmware Version: 1.6
Dimension: 36x36x11.5mm
Features:-
Current / Phase: 1.5A
Step Angle(degrees): 1.8
Phase: 2
Type: Hybrid
Certification: ROHS,CE
Holding Torque: 4.2 KGCM
Step angle accuracy: + – 5%(full step, not load)
Resistance accuracy: + – 10%
Inductance accuracy: + – 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature: -20deg ~+50deg
Insulation resistance:100M Min,500VDC
Insulation Strength: 500VAC for one minute
(Lead Screw).
Features
Operating Voltage(V): 3- 5
Operating Current(mA): 2
Communication protocol: I2C
Power saving mode
Automotive grad
Small size, low cost
1pcs IMU cable for DJI Mavic Air 2S
The product is compatible with DJI AIR 2S
Features
Waterproof level: Ip x 67
Pixel: Vga 300k
Resolution: 640 x 480
Focal distance: 3cm-6cm
Waterproof camera operating system: Android or windows2000 or windows xp or vista or windows7 or windows8.
Features:
Thickness – 0.203 mm (0.008 in.).
Length – 191 mm (7.5 in.)** (optional trimmed lengths: 152 mm (6 in.), 102 mm (4 in.), 51 mm (2 in.)).
Width – 14 mm (0.55 in.).
Sensing Area – 9.53 mm (0.375 in.) diameter.
Connector – 3-pin Male Square Pin (center pin is inactive).
Substrate – Polyester.
Pin Spacing – 2.54 mm (0.1 in.).
Standard Force Ranges – 445 N (0 – 100 lb).
Temperature Range (Low) : -40 °C
Temperature Range (High) : 60 °C
Features
• USB on right side
• PPM/PWM input as through-hole
• Flexible motor outputs, support various airframe types:
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
• Up to 8 ch RC input – supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
• Built in FrSky telemetry inverter
• Battery voltage monitoring
• Modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
• 3.3V, I2C on standard-size headers
• SBUS Inverter built in
• Spectrum satellite
Features
Output Power: 20 Watts
Operating Voltage: 12 Volt
Wattage (Wp): 20
Voltage at Max Power: 18.20 volts
Current at Max Power: 1.10 amps
Open Circuit Voltage: 22.40 volts
Short Circuit Current: 1.45AL
Features:-
• Class D amplifier produces 2 x 50 watt @ 8 ohms
• Can be wired R+ to L+ for mono mode
• 8″ stereo wiring harness included
• Short-circuit and over-temperature protection
• Supply Voltage 10-26 V DC.
• Standby and mute features
• Short-circuit protection
• Thermal overload protection
• Externally synchronizable.
Features:-
Amplifier chip: TDA7498E
Working voltage: DC 15-36V (Recommend 32V, 8A, if power is too small will appear distortion and so on.)
Output power: 2 x 160W
Number of channels: Two-channel Stereo
Efficiency: 85%
Applicable speaker impedance: 4/6/8ohm (8ohm is the best).
160-W + 160-W output power at THD = 10% with RL = 4 Ω and VCC = 36 V
1 x 220 W output power mono parallel BTL at THD = 10% with RL = 3 Ω and VCC = 36 V
Wide-range single-supply operation (14 – 36 V)
High efficiency (η = 85%)
Parallel BTL function using the MODE pin
Four selectable, fixed gain settings of nominally 23.8 dB, 29.8 dB, 33.3 dB and 35.8 dB
Differential inputs minimize common-mode noise
Standby and mute features.
Features:
Input Voltage: 5V.
Power Consumption: 55mA@ 5v.
Lux: 0.08Lux/ F1.2.
Sensor: 1/3 “CCD.
Format: NTSC/PAL(Free switch).
Resolution: Ultra High Definition 1000TVL.
PAL: 976H X 582V.
NTSC: 976H X 494V.
Lens: 2.8mm IR coated.
FOV: 110 °.
Operating temperature: 0 to 40°C.
Camera size: 28 * 24.5 * 17.5mm.
Len Size: 17mm *14mm.
Net Weight: 10g ( not included the box).
Features
Model: CC3D EVO
Input Voltage:5 V
Sensors: Micro-Controller STM32, MPU6000
Features
Input Voltage: 11~18v
Circuit Power: Max Charge 50W – Max Discharge 5W
Charge Current Range: 0.1~5.0A
Discharge Current Range: 0.1~1.0A
NiMH/NiCd Cells: 1~15
LiIon/LiPoly Cells: 1~6
Pb Battery Voltage: 2~20v
Weight: 277g
Dimensions: 133x87x33mm
Features
Compatible Motor: Hub Motor
Body Material: Aluminium
Rated Voltage: 24 V
Rated Power: 350 W
Features
Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
Operates over the extended -40C to +85C temperature range
Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
Supports HID devices, such as keyboards, mice, joysticks, etc.
Features
DVK512 x 1
USB type A plug to mini-B plug cable x 1
4-pin 2-pin wires pack x 1
RPi screws pack (2pcs) x 1
Features
RGB Backlight Keys
Onboard trackpad with all mouse function
Left+Right click Gaming keys
Operate on inbuilt Rechargeable battery
Navigation, Volume Rockers and Home key
Portable Pocket Size
Plug and Play operation, No drivers needed to install
Compatible with all Devices and operating Systems
Features
Heavy Duty Metal Gears.
Uniformity of parts.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Relatively low coefficient of friction.
Corrosion-resistance; elimination of plating, or protective coatings.
Features
Voltage : 12V
Rated Power : 120W
No load current : < 0.55A
Rate torque : 4.58 KgCm(0.45N.m)
Rate current : < 7.0A
Efficiency : >70%
Shaft diameter: 8 mm (milled groove one-sided 1 mm)
100% Ball Bearing construction!
Speed: 3350RPM.
Weight: 1.06Kg.
This Pack Includes Depron Sheets only 5mm Thickness* 5 piece
Drone front protective frame replacement for DJI FPV drone.
Used to replace the damaged aircraft body protective frame.
No color difference, perfect match, professional repair parts.
Complete functions and stable performance.
Can replace damaged originals.
Easy installation, fine craftsmanship and perfect style.
It is specially designed for MAVIC AIR 2 repair parts.
New high-quality accessories
Suitable for replacing damaged body parts of DJI Mini 2
The replacement process needs to be cautious, it is best to have professional skills
Compatible with DJI Mini 2
Product include: 1 piece Lower Shell
Features
Display: LCD Backlight
Working Voltage: 80~270V AC
Test Voltage: 80~270V AC
Rated Power: 100A/22000W
Operating Frequency: 45~65Hz
Energy Measuring Range: 0~9999.99KWh
Power Measuring Range: 0~22000W
Working Time: 0~9999.59 Hours
Measurement Accuracy: 1.0 Grade.
Features:-
USB interface: USB 2.0
Cable Length: 2M
Camera head outer diameter: 7mm.
Pixels: 300000 pixels.
Resolution: 640*480(VGA), 30 ftps.
LED: 6 white LED bright light.
Focal distance: 2cm-infinate.
Waterproof level: IP67.
Temperture: -20 ~ 100℃.
Color: black.
Features:
Operating voltage: 12V DC.
Frequency l1, 1575.42mhz
C/a code 1.023mhz chip rate
16-channels GPS search engine
Ultra-low-power design (38mA, typical)
Compact size
Built-in low noise, high gain active antenna
Super-cohesive magnetic for installation
High sensitivity (up to -152dBm type)
Super-cohesive magnetic for installation
Apply to host devices with USB or RS232
Compatible with TTL serial.
Features:
Most Perfect 2.1 digital amplifier board.
8.20 latest upgrated version
Gain promoted to 36DB,
Adopts two high-quality TPA3116D2 digital amplifier chips.
Good sound quality, high efficient device and power amplifying feature.
50W x 2+100W 1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
Powered by DC 12-24V, wide input voltage.
User can adjust the volume by themselves easily.
Applicable speaker impedance: 4-8 ohm.
Features:
High reliability, low cost and compact size.
LED Flash for low charge warning.
Memory option to recall quantity of electricity.
Specifically designed to monitor the power level of battery while charging or discharging.
Provides instant battery status to permit effective management of the charging.
Display of 4 segment LED bar graph.
Easy to install and operate.
Features:
Input Voltage Range : 3.5V to 30V
Output Voltage Range: 4V to 30V
Input Maximum Current : 5A
Power : 30W
Efficiency : 92%
Operating temperature: -40 ℃ – 85 ℃
Load capacity: 80W (MAX)
Mode of connection: Wiring terminals are free of soldering, IN is input, OUT is output.
Suitable for 24V car or laptop power supply.
Low ripples.
Features:-
Tracking sensitivity: 161 dBm
Capture sensitivity : 148 dBm
cold start time: 38s average
Warm start time: 35s average
hot start time: 1s average
Capture time: 0.1s Average.
Features:
Voltage: 24V.
Wattage: 24V 350W.
Throttle: 1-4V.
Short voltage protect: 31.5±0.5V/42±0.5V.
Color: silver.
Dimension: 105 x 65 x 32mm
Casing material: Aluminium.
Features
Heavy Duty Metal Gears.
Uniformity of parts.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Relatively low coefficient of friction.
Corrosion-resistance; elimination of plating, or protective coatings.
Features
Heavy Duty Metal Gears.
Uniformity of parts.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Relatively low coefficient of friction.
Corrosion-resistance; elimination of plating, or protective coatings.
Features
Heavy Duty Metal Gears.
Uniformity of parts.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Relatively low coefficient of friction.
Corrosion-resistance; elimination of plating, or protective coatings.
Features
Heavy Duty Metal Gears.
Uniformity of parts.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Relatively low coefficient of friction.
Corrosion-resistance; elimination of plating, or protective coatings.