Xbee Module S2C XB24CZ7WIT-004
Features:
- Integrated, Wire Antenna
- Interoperable with other ZigBee-compliant devices
- Programmable versions with onboard microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Data Rate: RF 250 Kbps, Serial up to 1 Mbps
- Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
- Transmit Power: 3.1 mW (+5 dBm)
- Channels: 16 channels.
Raspberry Pi Camera Module V2 – 8 Megapixel 1080p
Features
- Fixed focus lens on-board
- Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
- Uses the Sony IMX219PQ image sensor – high-speed video imaging and high sensitivity
Leadshine DM320C
Features
- Anti-Resonance, provides optimum torque and nulls mid-range instability
- Motor self-test and parameter auto-setup technology, offers optimum responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
- Microstep resolutions programmable, from full-step to 102,400 steps/rev(Note1)
- Supply voltage up to 30 VDC
- Output current programmable, from 0.3A to 2.0A( Note)
- Pulse input frequency up to 70 KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors.
Non Unite 250W MY1016 24v Motor
Features
| Model | MY1016 |
| Operating Power | 250 W |
| Operating voltage (V DC) | 24 |
| Rated Current (A) | ≤ 13.7A |
| Rated Speed (RPM) | 2650 +/- 5 % |
| Rated Torque (N-m) | 0.87 Nm |
| No load Current (A) | 0.7 – 1.4 A |
| Transmission | Chain sprocket (11 teeth, pitch 1/4″=6,35 mm) |
| Weight(g) | 1900 |
40W solar panel
Features
- Max Power at STC: 30W
- Short Circuit Current : 1.70A
- Optimum Operating Current : 1.60A
- Open Circuit Voltage : 22.9V
- Opitmum Operating Voltage : 19.5V
- Operating Temperature: -40ºC to 90ºC.
Voice Recognition Module -Arduino Compatible
Features
- Voltage: 4.5-5.5V
- Current: <40mA
- Digital Interface: 5V
- TTL level UART interface
- Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface
- Size: 30mm x 47.5mm
Super:bit expansion board for BBC Micro Bit Pocket Sized – Single Board Computer
Features:-
- Nordic Semiconductor nRF52833 processor
- Notched edge connector to make it easier to connect things like crocodile clips and also conductive thread.
- Power LED indicator in addition to the USB activity indicator.
- Gold plated antenna to easily identify the radio and Bluetooth component.
Depron 10 Sheet Pack 5mm( 30*20inch)
This pack includes Depron sheets, Suitable for building Flite Test Models RC Planes
F550 Frame
Features
- Model: F550
- Frame Weight: 620gm(including landing gear)
- Moter Mounting Hole Diameter: 3 mm
- Landing Gear Material: ABS
- Arm Size: 220 x 55 mm
- Landing Gear Length: 200mm
- Takeoff weight: 1200-2400 grams
VNH2SP30 – Monster Moto Shield 30A Mini Stepper Motor Driver
Features
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 34 mΩ
- Maximum PWM frequency: 10 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
DJI Mini 2 PTZ Camera Signal Transmission Cable
Genuine and Brand New
Compatible with DJI Mavic Mini 2 ONLY
High quality video signal cable for DJI Mavic Mini 2
Easy to install and dismount.
Good compatibility and fits well
DJI Mavic Mini 1 PTZ Camera Signal Transmission Cable
Genuine and Brand New
Compatible with DJI Mavic Mini ONLY
High quality video signal cable for DJI Mavic Mini
Easy to install and dismount.
Good compatibility and fits well
24V 36V 48V 72V Scooter EBike Electric Throttle Grip Handlebar LED Digital Meter – Orange Color
Features:-
- Product Size: 115 x 33mm.
- Cable Length: About 1.8m.
- Fits for: 22mm diameter Handlebar
- Yellow Wire: Power + 24V 36V 48V 72V.
- Red Wire: +5V.
- Green Wire: signal.
- Black Wire: – Negative Battery connection.
- Blue Wire: I/O button,such as light, horn.
- Yellow Wire: I/O button,such as light, horn.
GPS Modem SKG13C External Antenna
Feature
- Operating voltage: 3.0V to 4.2V
- Ultra high sensitivity: -165dBm
- Extremely fast TTFF (Time To First Fix) at the low signal level
- Low power consumption: Typical 45mA@3.3V
- NMEA-0183 compliant protocol or custom protocol
- Operating temperature range: -40 to 85℃
- SMD type with stamp holes
- Small form factor: 15x13x2.7mm
- RoHS compliant (Lead-free)
- Support walk model.
DJI Mavic Mini Upper Body Shell
New high-quality accessories
Suitable for replacing damaged body parts of DJI Mini 2
The replacement process needs to be cautious, it is best to have professional skills
Compatible with DJI Mini 2
Product include: 1 piece Upper Cover
36V/48V/60V Lithium battery case 400*165*90MM APS Plastic material
Features:-
- Dimensions: 400*165*90mm.
- Suitable for battery type: 36/48/60V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
Double Head 2 in 1 out J-Head Remote Extruder 3D Printers Extrusion Parts Hot End All Metal Heat Sink 1.75mm 0.4mm Bowden Part
Features:-
- Material: Aluminium Alloy.
- Style: Long Distance Universal Accessories Set.
- Nozzle: 0.4mm.
- Filament: 1.75mm.
Xbee Pro S2C Module XBP24CZ7WIT-004
Features:
- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m).
RS50 60 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 60 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
RS50 30 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 30 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
UNITE MY1016 250W 24v Motor
Features
- Output Power: 250W.
- Supply Voltage: 24V DC.
- Rated speed: 2650RPM.
- No load speed: 3000RPM.
- Full load Current: ≤13.7A.
- No load Current: ≤2.2A.
PI 3 Model B
Features
-
Onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance.
-
Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards.
-
Onboard headphone jack (extended from USB).
-
Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission.
-
Onboard RJ45 Gigabit Ethernet port, 10 / 100 / 1000 M adaptive.
-
Onboard PoE header, for connecting PoE HATs.
-
DSI interface is DSI1.
-
Micro USB port is for power supply and for programming images USB SLAVE.
-
Please do not connect to other devices when programming the image by micro USB so as to ensure that CM4 can be powered on normally.
-
When using CM4, you need to provide 5V/4A to CM4. Otherwise, it may power off, lower frequency, etc.
-
USB 2.0 is close by default, if used dtoverlay=dwc2,dr_mode=host should be added in config.txt.
-
It only supports 5V fan. (12V is not supported.) Please check it before connecting the fan, and note that the speed of the 5V fan cannot be adjusted without a controller.
Unite MY6812 12VDC 150W, 2750 RPM Electric Motor (Chain)
Features:-
- 9 tooth sprocket for #25 chain
- Loaded RPM: 2600-3000
- Efficiency: 70%
- Weight: 1.4 Kg.
DJI Air 2S Gimbal Flex Cable
This flex cable pack is compatible with DJI Air 2S drone.
Original replacement Air 2S flat cable.
Controller for 350W 36V Hub Motor – Electric Bike Bicycle
Features:
- Compatible Motor: Hub Motor
- Body Material: Aluminium
- Current Limit: 15 A
- Rated Voltage: 36 V
- Rated Power: 350 W.
eSun eABS Max 1.75mm 3D Printing Filament 1Kg – Black
The appearance is black, nontransparent.
Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant.
Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.
Allow acetone polishing for appearance.
NEMA 23 18.9 kg-cm
Features
- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 189 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm.
EMG Sensor / Muscle Sensor Module For Arduino
Features
- The diameter of the Electrode Pad: 52 mm
- Cable Length: 2 feet
- Weight: 30gm.
- Improved adjustable gain (more rugged)
- Onboard port for our new cables
- Connects to the board straight out of the box
- The reduced voltage needed (+-3.5V)
Power HD 1501MG High-Torque Metal Gears Servo 60g/ 17kg-cm
Features:
- Motor Type: DC Motor
- Gear Type: Copper
- Stall Torque: 15.5 kg-cm (4.8V); 17.0 kg-cm (6V)
- Operating Speed: 0.16sec/60degree (4.8V); 0.14sec/60degree (6.0V)
- Temperature Range: -20℃ – +60℃
- Working Frequency：1520μs / 50Hz
- Servo Wire Length: 32cm
- Current Draw at idle: 10mA
- No Load Operating Current: 170mA
- Stall Current: 1.2A.
DJI Mavic AIR 2 Lower Body Shell
100% brand new and high quality
For DJI Mavic air 2 drone body frame kit frame component repair parts
The drone repair part is made of plastic material, it is durable, non-toxic, good performance and long time to use, do not affect the flight quality
Lightweight design, do not increase the burden for the drone
The drone repair part is a perfect replacement for your damage one. It is easy to replace your broken one.
DJI Mini Shaft Arm ( Full Set )
Includes Front and Back arm set
Original DJI Replacement Part
Suitable for DJI Mini 1 / 2 / SE
Drillpro 290mm Drill Bits Accessories Electric Drill Tools Flexible Shaft Bits Extension Screwdriver Drill Bit Power Tool
Features:-
- Material: Plastic + metal.
- Full length: 295mm.
- Flexible shaft dimensions:
- Hex shank: 6.35mm (1/4″”).
- Inner hexagon head: 6.35mm (1/4″).
- Colour: Black.
- This Flexible shaft can be used for general formula hand drill chuck
- Used for the electric screwdriver.
- Flexible shaft head can be mounted hexagonal shank (1/4 handle) the first batch
- Widely used in computer chassis, electrical cabinets, furniture, electrical appliances and other narrow space screwdriver cannot work in an environment operations.
Controller for 12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
Features:-
- Rated Voltage: 24 Volt DC.
- Rated Power: 350W.
- Maximum Current: 25 Amps.
- Throttle: 1-4V.
- Level Brake: high/low.
- Under Voltage Protection: 20.5 Volts.
- Colour: silver.
- Dimension: 105 x 65 x 32mm
- Casing material: Aluminium.
BF-555 Gear / Geared Motor 60 RPM – High Torque
Features:
- Rated Voltage:12v
- RPM: 60 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 110 mA
- Load Current: 450 mA
- Stall Current: 1.8 A
- Full (Stall) Load Torque: 30 kg cm
- Weight: 500g Approx.
BF-555 Gear / Geared Motor 18 RPM – High Torque
Features:
- Rated Voltage: 12v
- RPM: 18 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 220 mA
- Load Current: 800 mA
- Stall Current: 3 A
- Full (Stall) Load Torque: 60 kg-cm
- Weight: 500g Approx.
BF-555 Gear / Geared Motor 6 RPM – High Torque
Features:
- Rated Voltage: 12v
- RPM: 6 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 110 mA
- Load Current: 450 mA
- Stall Current: 1.8 A
- Full (Stall) Load Torque: 90 kgcm
- Weight: 500g Approx.