3 Wires 0.28 inch Digital Voltmeter DC 0-100V Red Light LED Panel Voltage Meter
Features:-
- Display ON Voltage: 3 V
- Measurable Voltage Range: 0 to 100V
- Current Consumption: 10 mA
- Refresh Speed: 200ms (one time)
- Minimum Input: 3 V
- Highest Input: 30 V
- Accuracy: 0.1 V
- Colour: Red
- Wires: 3
- Operating Temperature: -10 to 60 degrees C
- Holes for Mounting: 3 mm.
12V 40W CR-10 ender 3 Extruder Assembled MK8 Hot End Kit for CR10 CR-10S S4 S5 Ender-3 Ender-3S Aluminum Heated Block parts 0.4m
Features:-
- Material: Aluminium & Stainless Steel & Brass.
- Installation Type: External Thread Connection.
- Application: Creality CR10.
- Nozzle size: 0.4mm/1.75mm.
- Throat pipe length: 30mm.
- Teflon tube: 0204/Length: 1m.
- Heating tube: 12V/24V 40W/Length: 1m.
- Thermistor: 100K NTC B 3950 ±1% /Length 1m.
- Aluminium block size: 20 mm x 20 mm x 10 mm.
- Operating temperature range: -40 ~ +260degC (-40 ~ +500 degF).
Load Cell – 1kg
Features
- Weighing Range: 0 ~ 1 kg.
- Rated Output: 1.0 ± 0.1mV / V.
- Non Linear Output: ± 0.03% F.S.
- Input Impedance: 1066 ± 10% Ω.
- Output Impedance: 1000 ± 10% Ω.
- Insulation Resistance: 2000 MΩ.
DC6-12V MINI Aquarium water Pump R385
Features:-
- Working voltage: DC 6-12V.
- Working current: 0.5-0.7A.
- Biggest Suction:2 M
- Inner Diameter:4 mm
- Outer diameter: 8 mm
- Lifecycle: up to 2500 H.
CS 1000 rpm
Features
- RPM: 1000.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- gearbox covered and lubricated with lithium grease
CS 150 rpm
Features
- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 150 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2
- Stall Torque(kg-cm): 7.8
DC-DC BOOST CONVERTOR Step UP I/P:- 10V-32V O/P:- 12V TO 35V /6A
Features
- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
12V Mini Air Pump Motor Air Vacuum Pump for Aquarium Tank Oxygen Circulate
Features
- Rated Voltage – DC12V (5-12V)
- Current Rating – 250mA 12V
- Charging Time – < 10 second (500cc containner, the time needed for pressure from 0-300 MMHG)
- Maximum Pressure – >450 mmHg (unit conversion value > 60 kpa > 0.6KG)
- Airtight – < 3 mmHg/min
- lTraffic – > 2.0L/min
- Noise – < 65dB
- Diameter – 4.2mm
- Size – 27mm x 58mm
1245 propeller
Features
- Brand: Orange
- Material: Glass Fiber Nylon
- Color: Grey
- No. of Blades: 2
- The Orange HD Propellers 1245(12X4.5) Glass Fiber Nylon Gray comes with Epoxy resin cover.
- Very strong and lightweight.
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor
Features:-
- Model: SK8.
- Shaft ID: 8mm
- Mounting Hole Diameter: Approx. 5.5 mm
- Center Hole Distance: Approx. 32 mm
- Material: Steel
- Light and simple design
- High torque capacity
- High rigidity
- High positioning accuracy, high rotating accuracy
- High efficiency
- Riding stability
- Dimensions: 14 x 42 x 32 mm
- Weight: 30gm.
SK8 Linear Rail Shaft Guide Support Bracket For 3D Printer Bearing CNC Stepper Motor
Features:-
- Model: SK8.
- Shaft ID: 8mm
- Mounting Hole Diameter: Approx. 5.5 mm
- Center Hole Distance: Approx. 32 mm
- Material: Steel
- Light and simple design
- High torque capacity
- High rigidity
- High positioning accuracy, high rotating accuracy
- High efficiency
- Riding stability
- Dimensions: 14 x 42 x 32 mm
- Weight: 30gm.
Servo bracket PT pan/till camera platform anti-vibration camera mount
Features:
- Supported Motors: 10kg-cm servos (such as MG995, MG996)
- No of Axis: 2 axis
- Weight : 51.2gms
- No of Metallic Pieces: 2
- This product is made of high-quality materials and is durable.
- Various sensors can be installed to complete a variety of novel interactive works through the servo controller.
- It is convenient to install the camera, which can realize image monitoring and image recognition and tracking.
Wemos D1 Mini ESP8266 NodeMcu Easy WIFI board for Arduino Internet of Things
Features:
- Use BRT (Bias Resistor Transistor)
- Easier into flash mode.
- 30% increase in radiating area
- Good stability.
TEC1-12706
Features
- Model number: TEC1-12706
- Operating Voltage: 12V
- Maximum Voltage Umax (V) : 15.4V
- Maximum Current Imax (A) : 6A
- Maximum Power: 92 W
- Maximum Temperature: 138°C
- Power Cord: 200mm
Attiny 5 Version 1
Features
- Flash (Kbytes): 8 Kbytes
- Pin Count: 8
- Max. Operating Freq. (MHz): 20 MHz
- CPU: 8-bit AVR
- Number of Touch Channels: 3
- Hardware QTouch Acquisition: No
- Max I/O Pins: 6
- Ext Interrupts: 6
- USB Interface:No
12v 2x10w hi-fi pam8610 audio stereo amplifier board module duel D class
Features:
1. Mini Hi-Fi PAM8610 Audio Stereo Amplifier board.
2. Work: D Class.
3. Quiescent current: 20mA.
4. Operating voltage: DC7.5 V- 15V.
5. Rated output power: 10w + 10w (8?).
6. Frequency response: 20Hz to 50KHz.
7. Recommended supply voltage: 12V, the center PIN of 12VDC is “+”.
8. Efficiency:90%.
9. PCB board size:40*40*20mm.
PCF8574 I/O FR I2c port interface support cascading extended module
Features:
- This is the I/O extended module used for I2C interface, you can use two of these modules to extend 8 I/O.
- Supports Arduino cascading, and you can use at most 8 modules to extend 64 I/O at the same time.
- Can be changed the address by set toggle switch.
- PCB Size: 36 x 16mm/1.41*0.62″.
- Every 2 seconds, make P0-P7 port output High level, Low level, and put 3 toggle switches to ON, the address of module is 0x27.
6v 100mA
Features
Best in Class conversion efficiency
Anti-reflective coating for more light absorption
Optically, mechanically and electrically tested
Dimension : 88x 55mm
Dual USB 5V 1A 2.1A Mobile Power Bank Battery Charger
Features:-
- Micro USB input: 5V 1A USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: intelligent digital display
- Batteries Type: liquid lithium-ion batteries (18650)
- Product Size: 57mm x 28mm Screen size:27mm x 17mm
Raspberry Pi 3 Case original
Features
- Optional clip-on lid provides protection but can be removed if using a HAT
- All primary ports (including microSD) accessible
- Removable side plate allows access to those wonderful GPIO pins
- Snug and secure fit protect your Pi while looking great!
- Anti-slip feet keep your Raspberry Pi stable
- Power and activity lights still visible through the end of the case
6v 80ma
Features
- 100% new high quality.
- 6 volt 80ma polycrystalline solar panel
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- A unique technique to prevent water frozen within the deforming framework.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
- Construction requires no frame or special modifications
- Small space required for installation.
Digital LCD indoor temperature humidity meter thermometer hygrometer Gauge
Features:
- Large LCD display shows big Digital Numbers
- Temperature, Humidity and Time can be seen simultaneously.
- It has Stand to use as table-top or Hook for placing on the wall.
- Integral-hour alarm function
- Time, Date & Month display
- Low Power Consumption
- Adjustment Buttons to select Mode, Setup, and Memory.
CS 10 rpm
Features
- RPM: 10.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 7 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
4pin 128X64 OLED0.96″- Blue
Features
- Super High Brightness (Adjustable)
- Super High Contrast (Adjustable)
- Embedded Driver/Controller
- Display size: 2.44 cm (0.96 Inch)
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- working voltage: 3.3V
- Control Chip: SSD1306
4pin 128X64 OLED 0.96″-White
Features
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Display Color: Area Color (White)
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Only Need 2 I/O Port to Control
- Full Compatible with Arduino
- Working temperature: -30°C ~ 70°C
- Interface: I2C
PCF8591-ADC-DAC
Features
- Module chip using PCF8951
- Module supports external voltage input of the 4-way acquisition (voltage input range of 0-5v)
- The module integrated photoresistor by AD collection precise value of the ambient light intensity
- Module integrated thermistor by the precise value of the ambient temperature of the AD acquisition
- Module integrated 1 channel 0-5V voltage input acquisition (the blue potentiometer to adjust the input voltage)
- Modules with power indicator (for the module power supply indicator lights)
E-18-D80 NK Infrared sensor
Features
- Sensing range: 3 – 80cm.
- Input voltage: 5VDC.
- Current Consumption: 300mA.
- Digital Output.
- Cable length: 1 m.
- Diffuse reflective type.
NEMA17 Stepper L Clamp
Features
- Motor Type: NEMA17
- Material: Mild Steel(MS).
- Dimensions: 50x48x44 (LxWxH) mm
- Mounting Holes Size: 4mm
- Weight: 73 gm.
3V To 5V 1A USB Charger DC-DC Converter Step Up Boost Module For Phone
Features:
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92%(Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
2 Wires Mini 0.36 Digital Voltmeter DC 4.7-32V Vehicles Motor Voltage Panel Meter LED Display
Features:-
- The voltmeter use 0.36 inch digital tube display, with super small volume, area with only a coin similar
- Connection is simple, just need to pick up two lines, a joint reverse protection, then do not burn
- Starting voltage is low, only 3.50 V, can correct measurement
- To achieve the best measurement precision, the voltmeter will measure the voltage according to the different automatic moving the position of the decimal point
- Can be used for measuring the car / battery car / motorcycle battery voltage, and other forms of voltage
- Can be used in all kinds of voltage measurement purposes.
65 Teeth Wheel Sprocket for #25 chain and 54mm Freewheel for MY1016
Features
- 65T Wheel Sprocket
- Weight: .24kg
- Type of chain: #25
- Freewheel: Optional
- Inner Diameter: 54mm
- Outer Diameter: 133mm
50kg pressure micro scale weighing sensor
Features:
- Capacity : 50.kg
- Output Sensitivity (mv/v): 1.0±0.1.
- Nonlinearity (%FS): 0.03.
- Repeatability (%FS): 0.03.
- Input Resistance: 1000. Ω
- Insulation Resistance : ≥5000.MΩ
- Alloy Steel wired weighing load cell
- High Accuracy
- Simple Structure & Easy Installation.
- Internal 1000 Ω half-bridge strain gauge load cell, the range is 50kg, half-bridge structure
- You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.
Mini LCD Digital Thermometer Sensor Wired for Room Temperature
Features:-
- Temperature Range: -50 to +110°C
- Temperature Display Resolution: ±0.1
- Temperature Measurement Accuracy: 1°C
- Cable Length: 1 Meter
- Easy to use, small, and handy module.
- Module powered by a pair of LR44 button batteries.
- Display Size: 34 x 15 mm
- Dimension: 46 x 26 x 15 mm.
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
Features:-
- Support CAN V2.0B technical standard, communication rate 1Mb / S.
- Module 5V DC power supply, SPI interface protocol control
- 0 to 8 bytes long data field.
- 8MHZ crystal oscillator
- 120Ω terminal resistance
- Use High-speed CAN transceiver TJA1050
- Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation.
Landing Gear Wheel Stop Set Collar 6×2.1mm 4 Sets
Landing Gear Wheel Stop Set Collar 6×2.1mm 4 Sets
Throttle
Features
Red Supply
Black GND
Green Signal