Controller – 24v 250W
Features
- Rated voltage: 24 v DC
- Current limit: 33A
- Rated power: 250 w
- Matching motor: dc brushed motor
- Under Voltage Protection: 20V
Controller – 24v 350W
Features
- Rated voltage: 24 v DC
- Current limit: 33A
- Rated power: 350 w
- Matching motor: dc brushed motor
- Under Voltage Protection: 20V
Controller – 24v 600W
Features
| Compatible for Motor | MY1020 600W |
| Body Material | Aluminium |
| Cable Length (cm) | 10 |
| Current Limit (A) | 33 |
| Rated Voltage(V) | 24 v DC |
| Under-Voltage Protection (V) | 20 V |
| Weight (gm) | 215 |
| Dimensions in mm (LxWxH) | 83 x 70 x 38 |
| Rated Power (W) | 600 |
Controller for 12 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
Features:-
- Rated Voltage: 24 Volt DC.
- Rated Power: 350W.
- Maximum Current: 25 Amps.
- Throttle: 1-4V.
- Level Brake: high/low.
- Under Voltage Protection: 20.5 Volts.
- Colour: silver.
- Dimension: 105 x 65 x 32mm
- Casing material: Aluminium.
Controller for 350W 36V Hub Motor – Electric Bike Bicycle
Features:-
- Voltage: 36V.
- Wattage: 36V 350W.
- Throttle: 1-4V.
- Short voltage protect: 30V.
- Colour: silver.
- Casing material: Aluminium.
- Note: It will only fit for Motor with sensors.
Controller for 350W 36V Hub Motor – Electric Bike Bicycle
Features:
- Compatible Motor: Hub Motor
- Body Material: Aluminium
- Current Limit: 15 A
- Rated Voltage: 36 V
- Rated Power: 350 W.
Controller for 8 Inch 350w 24v Brushless E-bike Hub Motor
Features:
- Voltage: 24V.
- Wattage: 24V 350W.
- Throttle: 1-4V.
- Short voltage protect: 31.5±0.5V/42±0.5V.
- Color: silver.
- Dimension: 105 x 65 x 32mm
- Casing material: Aluminium.
Controller for BM1418ZXF 48V 350W Controller for Brushless DC Motor
Features:
- Rated Output Power – 350W
- Rated Voltage – 48V
- DC Speed after Reduction – 480
- RPM Rated Speed – 2800
- RPM Gear Ratio – 1:6
- Full Load Current – 9.4A
- No Load Current – 2.8A
- Rated Torque – 7.2 N.m.
- Application – Small and Medium size E-Tricycle.
Controller for BM1418ZXF 48V 750W Controller for Brushless DC Motor
Features:
- Rated Voltage: 48V.
- Rated Output Power: 750W
- Speed after Reduction: 480 RPM
- Rated Speed: 2800 RPM
- Gear Ratio: 1:6
- Throttle: 1-4V.
- Full Load Current: 20A
- No Load Current: 5A
- Rated Torque: 15.36 N.m.
- Load Capacity: Up to 350 KG
- Small and Medium-size E-Tricycle.
Coreless Motor + Propeller 7×20
Features
- Model: 8520
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V. @ 0.12A
- Rated RPM: 50000.
- Wire Length: 6cm
- Prop. Length: 55 or 65 mm
CR-10 Extruder Upgraded Replacement Aluminum MK8 Drive Feed 3D Printer Extruder for Ender 3 CR-10 CR-10S CR-10 S4
Features:-
- This extruder set is great for Creality 3D Ender 3 ender 3 pro-CR-10.
- Filament Materials: PLA/ABS/Wood/TPU/PTEG,
- Made of high quality metal material.
- Easy and convenient to use.
- With high quality and durable performance.
- Main material: MetalMounting screws.
- Aluminium MK8 extruder frame, with bored intake hole.
- Spring. Brass extruder drive gear.
- Special Bowden tube fitting (great improvement over stock).
- For all 1.75 mm filament.
- Right hand extruder kit
- MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
Creality 3D CR-10S DIY 3D Printer Kit 300*300*400mm Printing Size With Z-axis Dual T Screw Rod Motor Filament Detector 1.75mm 0.4mm Nozzle
Features:-
1. It is the upgraded version of CR-10.
2. With Filament detector, can reduce accidents and avoid model printing interrupts.
3. With Dual lead screws with motor, more durable to use.
4. Use Industrial-grade PCB mainboard, more highly integrated modules, can continuously print for about 200 hours without pressure, with matures printing technology and stable performance.
5. Only take 10 minutes to install.
6. Use newest V-slot linear bearing system, brings high accuracy and low noise printing.
Creality 3D Ender-3 Pro V-slot Prusa I3 DIY 3D Printer 220x220x250mm Printing Size With Magnetic Removable Platform Sticker/Power Resume Function/Off-line Print
Features
- Modelling technology: FDM ( Fused Deposition Modelling）
- Printing size: 220 x 220 x 250 mm
- Machine size: 440 x 410 x 465 mm
- Max traveling speed: 180mm / s
- Filament: 1.75 mm PLA, TPU, ABS, Gradient color, carbon fiber, etc.
- Input: AC 100 – 265V, 50 – 60Hz
- Output: DC 24V, 15 A, 360W
- Layer thickness: 0.1 – 0.4 mm
- Nozzle diameter: 0.4 mm
- Precision: ±0.1 mm.
Creality 3D Ender-3 V-slot Prusa I3 DIY 3D Printer Kit 220x220x250mm Printing Size With Power Resume Function/MK10 Extruder 1.75mm 0.4mm Nozzle
Features
- Modeling Technology – FDM（Fused Deposition Modeling).
- Printing Size – 220*220*250mm.
- Machine Size – 440*410*465mm.
- Net Weight – 8KG.
- Printing Speed – 180mm/s.
- Filament – 1.75mmPLA, TPU, ABS.
- Power Supply – 100-265V 50-60HZ.
- Output – 24V 15A 360W.
- Layer Thickness – 0.1-0.4mm.
- Nozzle Diameter – 0.4mm.
Creality 3D Ender-5 DIY 3D Printer Kit 220*220*300mm Printing Size
Features:-
- Moulding Technology: FDM.
- Print Dimensions: 220*220*300mm.
- Print Speed: <180mm/s, Normal Printing Speed 40-80 mm/s.
- Print Accuracy: + – 0.1mm.
- Layers Thickness: 0.1-0.4mm.
- Nozzle Diameter: Standard 0.4mm. Convertible 0.2, 0.3mm.
- Nozzle Quantity: 1.
- Nozzle Temperature: <260 Degree C
- Hot Bed Temperature: <135 Degree C
- Working Modes: Online or TF Cards are printed offline.
- File Formats: STL, ODJ, AMF.
- Slicing Software: Cura, Repeti-Host, Simlify 3d.
- Power Parameters: Input:110v/220v. 50/60Hz. Output: DC 24V.
- Machine Power: 270W.
Creality Children CR-100 3d printer 100*100*80mm Printing Size 1.75mm 0.4mm Nozzle Support
This Creality Children CR-100 3d printer 100*100*80mm designed extremely as an innovative design, integrating classic elements, for beginners and children. This 3D printer is capable of providing more consistent, good-quality prints. Using a single extruder type with FDM technology, it offers a total size is 241 x 183 x 255 mm and its build volume is 100 x 100 x 80 mm. Thereby saves space with a small build size. This printer comes with a nozzle diameter of 0.4mm and a filament diameter of 1.75mm.
Creality Children CR-100 3d printer 100*100*80mm Printing Size 1.75mm 0.4mm Nozzle Support
Features:-
- Brand: CREALITY 3D
- Model: CR-100
- Technology: FDM
- Type: Material extrusion
- Printing Size: 100*100*80mm.
- Machine Size: 241*183*255mm.
- Package Size: 250*230*340mm.
- N.W: 2.8Kg.
- G.W: 3.9Kg.
- Colour : Red
- Printing Method: FDM.
- Number of Nozzle: 1pcs.
- Slice Thickness: 0.1mm-0.4mm.
- Filament Diameter: 1.75mm.
CS 10 rpm
Features
- RPM: 10.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 7 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
CS 100 rpm
Features
- It comes with Good Quality Gears.
- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
CS 1000 rpm
Features
- RPM: 1000.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- gearbox covered and lubricated with lithium grease
CS 150 rpm
Features
- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 150 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2
- Stall Torque(kg-cm): 7.8
CS 200 rpm
Features
| Phase |
Single Phase
|
| Voltage |
12V
|
| Speed |
200(RPM)
|
| Mounting |
NUT MOUNTING
|
| Application |
ROBOTICS
|
CS 2000 rpm
Features
| Phase |
Single Phase
|
| Voltage |
12V
|
| Speed |
2000(RPM)
|
| Mounting |
NUT MOUNTING
|
| Application |
ROBOTICS
|
CS 3.5 rpm
| Phase |
Single Phase
|
| Voltage |
12V
|
| Speed |
3.5(RPM)
|
| Mounting |
NUT MOUNTING
|
| Application |
ROBOTICS
|
CS 30 rpm
Features
- RPM: 30.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 2 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
CS 300 rpm
Features
- RPM: 300.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 2 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
CS 500 rpm
Features
- RPM: 500.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 1 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
CS 6 rpm
Features
| Phase |
Single Phase
|
| Voltage |
12V
|
| Speed |
6(RPM)
|
| Mounting |
NUT MOUNTING
|
| Application |
ROBOTICS
|
CS 60 rpm
Features
- RPM: 60.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 2 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
Current Sensor ACS712 20AMPS
Features
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
Current Sensor ACS712 30AMPS
Features
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 30A
- Sensitivity: 100mV/A
Current Sensor ACS712 5AMPS
Features
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
Data Logger Shield
Features
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents possible damage to your SD card.
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for 2 years.
- Included libraries and example code for both SD and RTC mean you can get going quickly.
- Prototyping area for soldering connectors, circuitry or sensors.
DC 10-25V Digital Wireless Power Amplifier Dual Channel Stereo 2*15W for Background Music
Features:-
- Power Output: Dual-channel 15W+15W. Applicable Speaker Impedance: 4/6/8/10 ohm. Supply Voltage: DC 10-25V.
- Audio Input: Wireless. Max. Receiving Distance: 10M. Supply Voltage: DC 10-25V.
- Power Supply Interface: 2.54*3PIN. Speaker Interface: 2.54*2PIN.
- Audio Input: Wireless. Max. Receiving Distance: 10M.
- PCB Board Size: 58 * 38mm / 2.3 * 1.5in. Weight: 14g / 0.5oz.
DC 12V KK-P25/20 5KG Lifting Solenoid Electromagnet
Features:-
- Operating Voltage: 12V DC
- Lifting Capacity: 8KG
- Size (D x L): 25 x 20 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
DC 12V Pneumatic Diaphragm Water Pump Motor R365
Features:-
- Model: R365 DC micro diaphragm pump
- Working voltage: DC 12V
- No load current: 0.23A
- Maximum flow: 2-3 liters/minute
- Outlet maximum pressure: 1-2.5 kg
- Maximum lift: 1-2.5 meters
- Maximum suction: 2 meters
- Motor length: 32mm
- Motor diameter: 28mm
- Pump length: 36mm
- Total length: 69mm
- Pump diameter: 40mm x 35mm
- Weight: 111 g Approx.