Leadshine DM542
Features
- Good high-speed performance
- Supply voltage up to +50VDC
- Output current up to 4.2A
- Pulse frequency up to 300 KHz
- Automatic idle-current reduction
- 3-state current control technology
- Self-adjustment technology
- Pure-sinusoidal current control technology.
DJI FPV Drone Middle Body Frame
Made of high-quality materials, reliable and durable
Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free
Perfectly fit for your DJI FPV Drone
Long service life and easy installation
DJI Mavic 2 PRO/ZOOM Middle Body shell
DJI Mavic 2 PRO/ZOOM Middle body shell
Original DJI product and new.
This part allows the replacement of the middle body shell DJI Mavic 2 PRO/ZOOM
Flysky CT6B 6 Channel
Features
- Model Type: Digital Radio Transceiver.
- Sensitivity: 1024.
- Bandwidth: 500 kHz.
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- No. of Channels: 6.
- Operating Voltage: 12V DC (1.5AA x 8 Battery).
Planetary 10 rpm
Features
- Rated Torque (kgcm): 23
- Stall Torque(kgcm): 90
- Rated Voltage: 12 V
- Rated current: 1.2 A
- Stall Current: 14 A
- Weight: 975 gm
6 Inch 350w 24v Brushless E-bike Wheels Scooter Hub Motor
Features:-
- Max speed: 28 km/h.
- Weight: 2.03 kg
- Shaft Type: D-type
- Shaft Length: 50 mm
- Shaft Diameter: 16mm (ROUND SIDE); 13.5mm (FLAT SIDE).
DJI Mini 2 Middle Body Shell
New high-quality accessories
Suitable for replacing damaged body parts of DJI Mini 2
The replacement process needs to be cautious, it is best to have professional skills
Compatible with DJI Mini 2
Product include: 1 piece Middle Body Shell
DJI Mavic Mini Rear Left Arm
1.100% Original fully compatible replacement arm assembly for DJI Mavic Mini.
2.Perfect repair your drone after crash.
3.Please kindly confirm the correct motor arm before purchase.
4.Package included: 1 X Motor Arm with Wiring( Left Rear).
DJI Mavic Mini Front Right Arm
Front Right Arm
Full Arm Assembly with Motor
Compatible with DJI Mavic Mini Only
DJI Mavic Mini Rear Right Arm
100% Original fully compatible replacement arm assembly for DJI Mavic Mini.
Perfect repair your drone after crash.
Please kindly confirm the correct motor arm before purchase.
for Mavic Mini Motor Arm with Wiring ( Rear Right )
DJI Mavic Mini Front Left Arm
100% Original fully compatible replacement arm assembly for DJI Mavic Mini.
Perfect repair your drone after crash.
Please kindly confirm the correct motor arm before purchase.
Mavic Mini Motor Arm with Wiring ( Front Left).
Stepper Motor NEMA 23 23 kg-cm Hybrid Bipolar
Features:
- Phase – 2 phase Bipolar
- Rated Voltage:2.55V
- Current/ phase: 3.5A
- Inductance/ phase: 2.8 mH (20% variance)
- Resistance/ phase: 0.73 Ohms (10% variance)
- Holding Torque: 23 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm.
NEMA 34 34 kg-cm
Features
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 67
- Current/Phase A: 5.9
- No of Leads: No. 4
- Shaft type: Keyway Type.
5” TFT for Raspberry PI
Features
- Display Size: 5″
- Resolution: 800 x 480 pixel
- Supply Voltage: 5V @1A
- Very easy to assemble with Raspberry Pi.
DJI Mavic 2 PRO/ZOOM Upper Shell
DJI Mavic 2 PRO/ZOOM – Upper Shell
Original DJI product and new.
This part allows the replacement of the upper Shell of the DJI Mavic 2 PRO/ZOOM
IMAX B6-AC Lipo NiMH Battery Charger/Discharger 1-6 Cells
Features
- AC 100~240v or 12V DC input
- The cables come with a fitted fuse.
- Microprocessor controlled
- Li-ion, LiPo, and LiFe capable
- Input voltage monitoring. (Protects car batteries at the field)
- Battery break-in and cycling feature
- Data storage (Store up to 5 packs in memory)
- Internal resistance checker to see pack health
- Delta-peak sensitivity
- Individual cell balancing
iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER
B6 Digital LCD RC Lipo NiMh Battery Balance Charger (Blue)
DJI Mavic 2 PRO/ZOOM lower Shell
DJI Mavic 2 PRO/ZOOM Lower shell
Original DJI product and new.
This part allows the replacement of the lower shell of the
DJI Mavic AIR 2S Upper Body Shell
100% brand new and genuine DJI repair part
Only suitable for DJI Mavic air 2S drone
Easy to replace your broken one.
DJI Air 2S PTZ Camera Signal Transmission Cable
Genuine and Brand New
Compatible with DJI Mavic Air2S ONLY
High quality video signal cable for DJI Air 2S
DJI Mavic Air 2 Gimbal Camera PTZ Signal Cable
Stable connection, excellent performance
Suitable for DJI Mavic Air 2
Controller for 350W 36V Hub Motor – Electric Bike Bicycle
Features:-
- Voltage: 36V.
- Wattage: 36V 350W.
- Throttle: 1-4V.
- Short voltage protect: 30V.
- Colour: silver.
- Casing material: Aluminium.
- Note: It will only fit for Motor with sensors.
PH Sensor Module & PH electrode Probe for Arduino, AVR, PIC
Features:
- Module Power: DC 5.00V.
- Measuring Range: 0-14PH.
- Accuracy: 0.01 pH
- Response Time: ≤ 1min.
- Industry pH Electrode with BNC Connector.
- Power Indicator LED.
- Output: Analog values in the range of (0.5V to 3V).
- Alkali Error: 0.2PH.
- Internal Resistance: 250MOhm.
- Gain adjustment Potentiometer.
- Measuring Temperature: 0 degrees to 50 degrees C
- Terminal Blocks: BNC plug.
DJI Mini 2 Flexible 3 in 1 Flat Cable
This flex cable pack is compatible with DJI mini 2 drone.
Original replacement mini 2 flat cable.
DJI Mini 2 gimbal cable pack.
DJI Mini 2 Upper Body Shell
New high-quality accessories
Suitable for replacing damaged body parts of DJI Mini 2
The replacement process needs to be cautious, it is best to have professional skills
Compatible with DJI Mini 2
Product include: 1 piece Upper Cover
SIM900 GPRS/GSM Shield Development Board Quad-Band Module For Arduino Compatible
Features:-
- Quad-Band 850 / 900/ 1800 / 1900 MHz – would work on GSM networks in all countries across the world.
- Control via AT commands – Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
- Short Message Service – so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
- Embedded TCP/UDP stack – allows you to upload data to a web server.
- Industrial Temperature Range – -40°C to +85 °C.
36V/48V/60V Lithium battery case 360*160*100MM APS Plastic materail
Features:-
- Dimensions: 360*160*100mm.
- Suitable for battery type: 36/48/60V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
36V/48V Fold bike Lithium battery case 410*100*42mm aluminum alloy material
Features:-
- Dimensions: 410*100*42mm.
- Suitable for battery type: 36/48V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
36V/48V Lithium battery case aluminum alloy material 440*135*89
Features:-
- Dimensions: 440*135*89
- Suitable for battery type: 36/48V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
36V/48V Lithium battery case aluminum alloy material 385*110*76
Features:-
- Dimensions: 385*110*76mm.
- Suitable for battery type: 36/48V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
24V Lithium battery case 350*106*78mm
Features:-
- Dimensions: 350*106*78mm.
- Suitable for battery type: 24V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 24V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
Finger print Scanner Module – TTL (GT-521F32)
Features:-
- Finger window: 12.9 x 16.9 mm.
- Image Size: 258 x 202 Pixels.
- Storage capacity: 200 fingerprints.
- Wake up on Finger Function.
- Anti-Scratch with surface high hardness ≧ 5H.
- Resolution: 450 dpi.
- CPU: ARM Cortex M3 Core MCU).
FlexiForce Tekscan A401 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
Bluetooth 4.0 Audio Receiver Board Wireless Stereo Sound Module 12V 24V Car
Features:-
- Sound balance:£¼2db
- Transmit power: Class2
- Handsfree protocol:1.6
- Supply voltage: DC 6~30V
- Transmission distance:10~20M
- Frequency response: 80Hz~22KHz
- Size(L*W*H):55 x 50 x 10 mmBluetooth Specification: Bluetooth V3.0+EDR, Support Bluetooth 4.0
DJI Mavic Mini Middle Body Shell
1.Middle Frame Shell for DJI Mavic Mini.
2.High quality, 100% original and new.
3.Perfect repair your drone after crash.
4.Package included: 1 X Middle Frame Shell for DJI Mavic Mini
Finger Print Module Scanner – TTL (GT-521F52)
Features:-
- Simple UART & USB communication protocol.
- Complies with USB 2.0 full-speed specification.
- Ultra-thin optical sensor.
- Resolution 450 dpi.
- Capable of 360° recognition.
- Storage for 3,000 unique fingerprints.
- Wake up on Finger Function.
- Works well with dry, moist or rough fingerprints.
- Anti-scratch with surface high hardness ≧
- 1:1 verification, 1:N identification.
- High accuracy and high-speed fingerprint identification technology.