DJI Mavic AIR 2 Upper Body Shell
100% brand new and high quality
For DJI Mavic air 2 drone body frame kit frame component repair parts
The drone repair part is made of plastic material, it is durable, non-toxic, good performance and long time to use, do not affect the flight quality
Lightweight design, do not increase the burden for the drone
The drone repair part is a perfect replacement for your damage one. It is easy to replace your broken one.
Planetary Gear DC Motor with Encoder 12V 435 RPM 2 N-m Torque – TPG36555126000-13.7KE
Features:-
- Model: TPG36555126000-13.7KE .
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 13.7: 1.
- Operating Voltage: 12. V DC
- Rated Current: 0.800.A
- Rated Base Motor: RPM
- Rated Speed: 435 RPM
- Rated Torque: 2N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 315 RPM 2.5 N-m Torque – TPG36555126000-19KE
Features:-
- Model: TPG36555126000-19KE
- Motor Type: DC Carbon Brush Motor.
- Operating Voltage: 12. V DC
- Rated Current: 0.800.A
- Rated Base Motor: RPM
- Rated Speed: 315 RPM
- Rated Torque: 5N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 85 RPM 8.5 N-m Torque – TPG36555126000-71KE
Features:-
- Model: TPG36555126000-71KE
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 71 : 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.800.A
- Rated Base Motor: RPM
- Rated Speed: 85 RPM
- Rated Torque: 5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 11 RPM 10 N-m Torque – TPG36555123000-264KE
Features:-
- • Model: TPG36555123000-264KE
• Motor Type: DC Carbon Brush Motor.
• Gear Ratio: 264: 1.
• Operating Voltage: 12. V DC
• Rated Current: 0.800.A
• Rated Base Motor: 3000.RPM
• Rated Speed: 11 RPM
• Rated Torque: 10 N-m
• Operating Temperature: -40 °C ～ +100°C.
• Opt. Relative Humidity: 20% ～ 85% RH
• Gear Material: Powder Metallurgy, Steel, POM.
• Housing Material: Metal.
• Motor Body Size (Diameter): 36. mm
• Motor Length: 11.5mm
Planetary Gear DC Motor with Encoder 12V 500 RPM 0.5 N-m Torque – TPG28395126000-12KE
Features:-
- Model: TPG28M395-12K.
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 12: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.750.A
- Rated Base Motor: RPM
- Rated Speed: 500 RPM
- Rated Torque: 5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 285 RPM 1.2 N-m Torque – TPG28395126000-21KE
Features:-
- Model: TPG28395126000-21KE
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 21: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.750.A
- Rated Base Motor: RPM
- Rated Speed: 285 RPM
- Rated Torque: 2 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 115 RPM 2.5 N-m Torque – TPG28395126000-52KE
Features:-
- Model: TPG28M395-52K.
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 52: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.750.A
- Rated Speed: 115 RPM
- Rated Torque: 2.5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 9 RPM 7.5 N-m Torque – TPG28395123000-334KE
Features:-
- Model: TPG28M395-334K.
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 334: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.250.A
- Rated Base Motor: RPM
- Rated Speed: 9. RPM
- Rated Torque: 5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal..
DP50V5A Constant Voltage current Step-down Programmable Power Supply module buck Voltage converter color LCD voltmeter
Features:
- Model: DP50V5A.
- Input voltage range: 6.00-55.00V.
- Output voltage range: 0.00-50.00V.
- Output current: 0.000-5.000A.
- Output power range: 00.00-250.0W.
- Product Weight: 78g.
- Product Dimension: 79 x 43 x 48(mm) (L x W x H).
- Open size: 71mm x 39mm.
- Output voltage resolution: 0.01V.
- Output current resolution: 0.001A.
- Output Voltage accuracy: ± (0.5% + 1 digits).
- Output Current accuracy: ± (0.5% + 2 digit).W*H).
- Open size: 71mm*39mm.
- Output voltage resolution: 0.01V.
- Output current resolution: 0.001A.
- Output Voltage accuracy: ± (0.5% + 1 digits).
- Output Current accuracy: ± (0.5% + 2 digit).
Robodo – Arduino RFID learning kit V5 with Instruction CD & Uno SMD
Features:
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming.
- A variety of components are included in this pack to try out different projects.
Robodo – Arduino RFID learning kit V4 with Instruction CD & Uno R3
Features:
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming.
- A variety of components are included in this pack to try out different projects.
Robodo – Basic Starter Kit for arduino Starter with UNO R3
Features:
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G.
36MM Planetary Gear Motor 300 RPM 12v DC – High Torque
Features:
- Motor Type: DC Planetary Gear Motor
- Gear Material: Metal
- Motor Length: 57mm
- Shaft Length: 20mm
- Total Length: 100mm
- Gearbox Diameter: 36mm
- Motor Diameter: 36mm
- Shaft Diameter: 8mm
- Weight: 350g
- Rated Voltage: 12
- Reduction Ratio: 1:19
- No-load Speed: 315 RPM.
Stepper Motor NEMA 23 28 kg-cm Hybrid Bipolar
Features:
• Phase – 2 phase Bipolar
• Rated Voltage:4.8V
• Current/ phase: 3A
• Inductance/ phase: 7.5 mH (20% variance)
• Resistance/ phase: 1.6 Ohms (10% variance)
• Holding Torque: 28 kg-cm
• Number of Leads: 4
• Step Angle: 1.8°
• Step Angle Accuracy: ±5% (full step, no load)
• Resistance Accuracy: ±10%
• Inductance Accuracy: ±20%
• Frame Size: 85x85mm
• Shaft Length: 32mm
Planetary 350 rpm
Features
- RPM:350
- Rated Voltage: 12 V DC
- No Load Current: 600 mA
- Full Load Current:14A
- Stall Torque :28 kg-cm
- Number of Gear Trains: 2
- Base Motor RPM:5000
- Brushed permanent magnet DC motor
- Variable speed and reversible
- Planetary Gear Box
DMA860H Digital Stepper Motor Driver with micro stepping 24 to 80V 7.2A
Features:-
- Extremely cost-effective.
- Good high speed performance.
- Supply voltage up to 80VAC or +110VDC.
- Output current up to 7.2A.
- Self-adjustment technology.
- Pure-sinusoidal current control technology.
- Pulse input frequency up to 300 KHz.
- TTL compatible and optically isolated input.
- Automatic idle-current reduction.
- 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev.
- Suitable for 2-phase and 4-phase motors.
- Support PUL/DIR and CW/CCW modes.
Robodo – Arduino Mega 2560 RFID starter kit learning suite V2
Features:
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB.
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in.
FEETECH FT5335M 35kgcm Ultra-High-Torque, High-Voltage Digital Giant Servo
Features:
- Digital Giant Servo
- Ultra-high Torque, High voltage
- Speed @ 7.4V: 0.18 sec/60°
- Stall torque @ 7.4V: 40 kg.cm
- Speed @ 6V: 0.20 sec/60°
- Stall torque @ 6V: 35 kg.cm
- Lead length: 12 inch
- Servo horns and associated hardware are included
- Dimension: 62.8 × 32.5 × 55.9 mm.
- Weight: 180 g.
UNITE MY1016Z2 250W 24v Motor
Features
- Output Power: 250 Watt.
- Rated Voltage: 24V
- Rated Speed: 360 RPM
- Full load Current: ≤13.4A
- No load Current: ≤2.2A
- Torque Constant: 0.8 N.m
Dual Monster Moto Shield VNH2SP30 Motor Driver 2x14A (Peak 30A)
Features:
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
DJI Air 2S Roll Arm
1Pcs of DJI Air 2S Roll Arm
Controller for BM1418ZXF 48V 350W Controller for Brushless DC Motor
Features:
- Rated Output Power – 350W
- Rated Voltage – 48V
- DC Speed after Reduction – 480
- RPM Rated Speed – 2800
- RPM Gear Ratio – 1:6
- Full Load Current – 9.4A
- No Load Current – 2.8A
- Rated Torque – 7.2 N.m.
- Application – Small and Medium size E-Tricycle.
FEETECH FS6535M 33KG High Torque Analog Servo FOR large scale big rc Robot – FS6535M
Features:
- Operating Voltage:4.8-6Volts
- Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
- Stalling current: 3.8 A.
- No-load speed: 0.27±0.03(sec/60°).
- Direction: CCW.
- Operating Angle: 180degree.
- Required Pulse: 500us-2500us.
- Bearing Type: 2BB.
- Gear Type: Metal.
- Motor Type: Carbon.
DJI FPV Gimbal Signal Cable
100% brand new and high quality.
Designed for DJI FPV Gimbal camera only.
With this cable, you can get the video signal directly from the PTZ camera and record the video at the same time.
DJI Air 2S Yaw Arm
Gimbal Yaw arm for DJI Air 2S
DJI Mini 3 Pro Front Arm Axis
For DJI Mini 3 Pro
TPA3116D2 100W Channel Digital Power Audio Stereo Amplifier Board and DC 12-24V Car Stereo AMP Module for Audio System with Volume Knob
Features:-
- With DC power supply connection port and DC 12-24V wiring terminals (please do not use in the same time)
- 3.5mm audio input jack
- 3-pin audio input jack
- Volume/ Subwoofer/ Stereo knob adjustment,DC 12-24V power supply audio amplifier
- great for connecting to telephone or computer.
STEM learning kit of light following firefly robot for kids diy insect robot
Features:-
- Easy to Assemble
- Operating Voltage: 3V
- The battery is not included
- Self-assembly required
- Without the battery.
- Mini Size, convenient to store and carry
- It can improve children’s abilities of creativity and practice.
Unite MY6812 24VDC 150W, 2750 RPM Electric Motor (Chain)
Features:
- Voltage: 24v
- No-Load Current: 1A
- RPM: 3500
- Torque: 0.56Nm
- Loaded RPM: 2600-3000
- Wattage: 150W
- Rated Current: 14.3A.
- Efficiency: 70%
- Weight: 1.4Kgs
- 11 tooth sprocket for #25 chain.
DJI Mini 2 Front Left Arm With Motor
Original Left-front arm replacement for DJI mini 2
Brand new drone arm with motor and wire
Perfect replacement for DJI mini 2 drone repairing
Package include: Left-Front Arm
DJI Mini 2 Front Right Arm With Motor
Original Right-front arm replacement for DJI mini 2
Brand new drone arm with motor and wire
Perfect replacement for DJI mini 2 drone repairing
Package include: Right-Front Arm
DJI Mini 2 Rear Right Arm With Motor
Original Right-Rear arm replacement for DJI mini 2
Brand new drone arm with motor and wire
Perfect replacement for DJI mini 2 drone repairing
Package include: Right-Rear Arm
DJI Mini 2 Rear Left Arm With Motor
Original Rear Left Arm replacement for DJI mini 2
Brand new drone arm with motor and wire
Perfect replacement for DJI mini 2 drone repairing
Package include: Rear Left Arm
DPS3003 Constant Voltage current Step-down Programmable Power Supply module buck Voltage converter color LCD voltmeter
Features:
- Input voltage range: 6.00-40.00V.
- Output voltage range: 0V-32.00V.
- Output current: 0-3.000A.
- Output power range: 0-96W.
- Product Weight: about 90g.
- Product Dimension: 79*43*41(mm) (L*W*H).
- Open size: 71mm*39mm.
- Output voltage resolution: 0.01V.
- Output current resolution: 0.001A.
Output Voltage accuracy: ± (0.5% + 1 digits).
Output Current accuracy: ± (0.5% + 2 digit).
Smart car kit Electronic kits DIY V3 with Ultrasonic Ranging car Bluetooth wireless control IR remote control
Features:
- Working voltage: 7V – 12V.
- Decelerate motors ratio 1:48, drive voltage 6V.
- Uses L298N driver module, real isolation to MCU.
- Three groups of hunt module(detects black and white lines), higher accuracy.
- Infrared remote communication module, composed of smart car to be remote control system.
- Bluetooth wireless communication module (short-range wireless remote control).
- With economic and environmentally friendly rechargeable battery and charger.
- Can be equipped with a variety of sensor modules, depending on your imagination to achieve a variety of functions.