DJI Mini 2 GPS IMU Board
Mini 2 GPS + IMU module board
Mini 2 GPS Module Glonass Positioning – and IMU, Inertial Measuring Unit
Replacement Part for repair for DJI Mini 2
Doesn’t work with DJI Mavic Mini
3DR Single TTL MINI Radio Telemetry 433MHz 250mW for PIXHAWK and APM
Features:-
- MAVLink protocol framing status documents.
- Frequency modulation and Spread Spectrum (FHSS).
- Self-adaption to time-division multiplexing.
- Support LBT and AFA.
- Configurable duty cycle.
- Built-in error correcting code(up to 25% data bit error).
- AT command configures data transmission.
- RT command remote control data transmission.
- Interchangeable air and ground 433MHz modules.
- Micro-USB port.
- 6-position Molex connector.
- 250mW maximum output power (adjustable).
- SMA connector.
Pixy2 CMUcam5 Smart Vision Sensor – Object Tracking Camera for Arduino, Raspberry Pi, BeagleBone Black
Features:-
- Pixy2 detects lines, intersections and small barcodes, intended for line-following robots.
- Improved framerate – 60 frames-per-second.
- Tracking algorithms have been added to colour-based object detection.
- Improved and simplified libraries for Arduino, Raspberry Pi and other controllers
- Integrated light source.
- The small, fast, easy-to-use, low-cost, readily-available vision system
- Learns to detect objects that you teach it
- Connects to Arduino with the included cable. Also works with Raspberry Pi, BeagleBone and similar controllers.
- Supports C/C++ and Python
- Communicates via one of several interfaces: SPI, I2C, UART, USB or analogue/digital output.
- Configuration utility runs on Windows, macOS, and Linux.
- All software/firmware is open-source GNU-licensed.
- Dimensions: 43mm x 39mm x 16mm
- Height of Camera: 4mm / 0.16″”
Combo Kit – MY1016 250W Motor Kit
Features
- rated speed (rpm) :2650 +/- 5 %
- rated current : ≤ 13.7A; current without load :0.7 – 1.4 A
- rated torque :0.87 Nm
- transmission :chain sprocket (11 teeth, pitch 1/4″=6,35 mm), exchangeable, fixation nut shaft diameter :10 mm (milled groove one-sided 1,5 mm)
Leadshine DMA860H
Features
- Leadshine original D860H | MA860H microstepping drive.
- Input voltage :Up to +80VAC or +110VDC.
- Output current Up to 7.2A.
- Pulse input frequency up to 300 KHz.
- Automatic idle-current reduction.
- Over-voltage, over-current protection.
- Suitable for 2-phase and 4-phase motors.
- Support PUL/DIR and CW/CCW modes.
- Operating Temperature : 70 C.
Ardupilot Mega APM 2.8 Flight Controller
Features
- Model: APM 2.8
- Input Voltage (V): 12-16 V.
- Processor: ATMEGA2560 and ATMEGA32U-2
- Dimensions (mm) LxWxH: 70 x 45 x 15
350W 24V Hub Motor for Electric Bike Bicycle Rear wheel
Features:-
- Rated Voltage: 24V
- No load Current: 1A
- Rated Current: 14A
- Rated Power: 350 W
- Speed: 320 RPM
- Rated Torque: 6 N
- Compatible Wheel Size: 20 to 28 inches
- Spoke Holes: 36 holes
- Wheel diameter: 130 mm.
DC 48V 350W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features
- Rated Output Power: 350W
- Rated Voltage:48V DC
- Speed after Reduction: 480 RPM
- Rated Speed:2800 RPM
- Gear Ratio: 1:6
- Full Load Current: 9.4A
- No Load Current: 2.8A
- Rated Torque: 7.2 N.m.
- Application – Small and Medium size E-Tricycle.
Fingerprint GT511c3 TTL
Features
- High-Speed, High-Accuracy Fingerprint Identification using the SmackFinger 3.0 Algorithm
- Read and Write Fingerprint Templates and Databases
- Simple UART protocol (Default 9600 baud)
- Capable of 1:1 Verification and 1:N Identification
- 360° Fingerprint Recognition
Combo Kit – MY1016Z2 250W Motor Kit
Features
- 24 Volt DC Operation
- Permanent Magnet DC Motor
- Direct Drive (No Free Spooling)
- Suitable for forwarding and Reverse Operations
- Base Mount Model
- 9 Tooth Sprocket for 1/2 x 1/8 Pitch Chain
- This motor is capable of rotation in either clockwise or counterclockwise by reversing the motors power wires.
Stepper Motor NEMA 34 87 kg-cm Hybrid Bipolar
Features
- Step Angle Step Angle: 1.8 °
- Current: 5 A/Phase
- Holding Torque: 870 N-cm
- Lead Wires: 4
- Shaft diameter: 14 mm.
TL866II Plus USB Programmer Support 15000+IC SPI Flash NAND EEPROM MCU PIC AVR Replace TL866A TL866CS
Features:-
- Model: TL866II Plus
- With Multi-functional ICSP interface
- 40pin ZIF socket, fully automatic, support fast mode SPI
- USB interface for both data transfer and power supply
- With over-voltage and over current protection.
Mini 3 Pro R-axis Motor with Bracket
For DJI Mini 3 Pro
TL866II Plus Universal USB MiniPro USB Programmer for 15000+IC SPI Flash NAND EEPROM MCU PIC AVR
Features:-
- High-Speed Programming – 12 Mbps
- Unique ultra-low power consumption
- Portable performance
- Programmable programming power supply
- Best overvoltage, overcurrent protection
- 40-pin universal pin
- Upgrade function
- 54/74F/LS/HC CMOS4000 series IC functional tests
- AVR microcontroller one-to-one soft encryption
- Unified and convenient user interface
- NAND Flash: Yes.
Combo Kit – MY1016Z3 350W Motor DIY Ebike, Electric Bicycle Kit
Features:
MY1016Z3 350W Motor:
- Voltage: 24 volts DC
- Output: 350 watt
- Left or right rotation by reversing wires
- MY1016Z3 motor with gear reduction
- 300 RPM (after Reduction)
Motor Controller Specifications:
- Dimensions: 83 x 70 x 38 mm(LxWxH)
- Cables length: 10 CM(Approx.)
- Weight: 196 gm
- Rated voltage: 24 v DC
- Current limit: 33A
- Rated power: 350 w
- Matching motor: dc brushed motor
- Under Voltage Protection: 20V
- Strong Aluminium body
KK2.1.5 Flight Control
Features
- IC: Atmega644 PA
- Gyro/Acc: 6050MPU
- Input Voltage: 4.8V~6.0V
- AVR Interface: Standard 6 Pin
- Signal From Receiver: 1520us(5 channels)
- Signal to ESC: 1520 us
Yahboom programmable Running:bit based on Micro:bit compatible with LEGO
Features:-
- Can be created a variety of shapes (Pretty car, Proficient Carrier, Robot with clip, skilled remover, Mobile shooter, etc.)
- Using micro: bit as the core controller, simple and funny graphical or Python programming.
- Multi-function Super:bit expansion board to combine the building blocks and circuits.
- Support Android / iOS dual- system mobile APP remote control, Handle remote control.
- Each shape with rich functions: Bullet throwing, Dance battle, Weightlifting competition, sports competition and so on.
- Detailed assembly steps and more than 30 reference courses.
7” Touch Screen
Features
- 7-inch LCD display.
- 1024 x 600 screen resolution and IPS display panel.
- 170º viewing angle
- Toughened glass resistive touch panel.
- HDMI interface for displaying, USB interface for touch control.
- Supports 5-level backlight adjustment.
- Raspberry Pi and Windows device & system support.
Leadshine DMA860E Stepper motor driver
Features:
- Model: DMA860E.
- Control Mode: Step & Direction.
- Max Input Frequency: 200 kHz.
- Input Voltage Range: 18 – 80 VAC / 24 – 110 VDC.
- Suggested Power Supply Voltage Range: 36-90 VDC /24-60 VAC.
- Number of DIP Switch Resolution Configurations: 16.
- 16 selectable micro-step resolutions of 400-51,200 via DIP switches.
- 8 selectable output current settings of 2.4 – 7.2A via DIP switches.
- Logic Current Range: 7-16mA (10mA typical).
- Logic Voltage Range: 4-5 VDC for pulse active high (default), or 0-0.5V for pulse active low.
- Pulse enabled at: Rising edge.
MY1020Z 600W 36v Motor
Features
- Model: MY 1020Z2.
- Supply Voltage: 36V.
- Output Power: 600W.
- Speed: 480RPM.
- Full Load Current: 21.40 Amp.
- Torque: 1.80 N.m.
- Efficiency: 78%.
Flysky FS-16 6 Channel
Features
- Bandwidth (KHz): 500.
- RF Range (GHz): 2.40 ~ 2.48.
- No. of channels: 6.
- Remote controller weight (gm): 400.
- Power: 6V (1.5V AA*4).
- Antenna Length: 26mm * 2 (dual antenna).
- Transmitting Power: ≤ 20dBm.
- RF Receiver Sensitivity: -105dbm.
Stepper Motor NEMA 34 68 kg-cm Hybrid Bipolar
Features
- Rated Voltage:4.2V
- Current/ phase: 4A
- Holding Torque: 68 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm
- Shaft Length: 32mm
- Shaft Diameter: 12mm
- Long-lasting life.
Waveshare 7 inch Capacitive Touch Screen LCD 1024×600 HDMI interface supports various systems
Features
- Display Port: HDMI
- Display Panel: IPS
- Viewing Angle: 170 degree
- Touch Type: Capacitive
- Display Resolution: 1024×600.
- 5-points capacitive touch control.
Stepper Motor NEMA 34 87 kg-cm
Features
- Rated Voltage:4.2V
- Current/ phase: 5A
- Holding Torque: 87 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm
- Shaft Length: 32mm
- Shaft Diameter: 12mm.
Stepper Motor NEMA 34 46 kg-cm Hybrid Bipolar
Features
- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Holding Torque: 460 N-cm
- Lead Wires: 4
- Shaft diameter: 14 mm.
DumboRC X6 2.4GHz 6CH Radio Transmitter with X6F RC Receiver
The X6 is an affordable easy to use Transmitter for cars and boats. With 6 channels if can handle just about any model setup with extra auxiliary accessories. The included X6FG 6ch receiver has a built in Gyro perfect for Drift or any applications where steering stabilisation is needed.
MY1020 36v 1000W
Features
- 100% brand new and high quality
- Rated Voltage: 36 V
- Rated Power: 1000W
- Rated Speed: 3000RPM
- Rated Current: 26.7A
DJI mini 2 Power ESC board module
Original Power ESC board module for DJI mini 2 for Replacement
Professional Experience required for replacement
Only suitable for DJI Mini 2
DJI Air 2S Front Right Arm With Motor
Genuine DJI Repair Part
Right-front arm for DJI Air 2S
Profesional Installation experience required
Only compatible with DJI Air 2S, Not suitable for DJI Air 2 Model
DJI Air 2S Front Left Arm With Motor
Genuine DJI Repair Part
Left-Front arm for DJI Air 2S
Profesional Installation experience required
Only compatible with DJI Air 2S, Not suitable for DJI Air 2 Model
Non Unite 500W MY1020 24V Motor
Features
- Supply Voltage: 24v.
- Current Draw (Rated): 27.4A.
- Current Draw (No Load): 2.5A.
- Rated (constant) Torque: 190 N-cm.
- Speed: 2500 RPM.
- Efficiency: Greater than 75%.
- Weight: 4.10 Kg
UNITE MY1020 500W 24v Motor
Features
- Supply Voltage: 24v.
- Current Draw (Rated): 27.4A.
- Current Draw (No Load): 2.5A.
- Rated (constant) Torque: 190 N-cm.
- Speed: 2500 RPM.
- Efficiency: Greater than 75%.
- Weight: 4.10 Kg
UNITE MY1020 500W 24v Motor
Get high standard Brushless Ebike MY1020 120W 24V 3350RPM DC Electric Motor for your electric bike at the best price at mrchobbies.in. If you have been looking for a brushless motor then your search ends here. To build your known e-bike, you’ll get all the assembly parts & kits here at mrchobbies.in at the best price! This Motor is one of the most important parts of your Electric Bike.
FEETECH FT6560M 65kg Large Scale High Torque Servo
Features:
- Model: FT6560M.
- Operating Speed6.0v 0.15 sec/60°.
- Operating Speed7.4v 0.13 sec/60°.
- Stall Torque 6.0v 48 kg.cm.
- Stall Torque 7.4v 62 kg.cm.
- Motor: carbon.
- Control Way: Digital.
- Cable Length: 20cm.
- Gear: 5 metal gears.
- Bearing: 2BB.
- Dead band: 4us.
DJI Air 2S Rear Left Arm With Motor
Genuine DJI Repair Part
Left-Rear arm for DJI Air 2S
Profesional Installation experience required
Only compatible with DJI Air 2S, Not suitable for DJI Air 2 Model