2024 Yikong YK4106 PRO 1:10 RC Car Crawler 11CH Radio Tank Turing RTR
Description
Yikong 4106 Pro is a 1/10 RC crawler with an ability we have not yet seen in the RC crawling world. You may not have heard of Yikong before, but they’ve been quietly making some interesting models over 2023 and now 2024. This latest one is a model that combines the best features of the offerings of the likes of Axial’s SCX10 III with 2-speed transmission and DIG (disengages drive to the rear, then locks the rear, for tight turning and improved rock crawling ability) and the Traxxas TRX4 with its remotely activated locking diffs.
Racing Rally 1:10 4WD Off Road Crawler RC Car Range Rover First Generation
This 1/10 affordable highly detailed and capable 4WD Defender will surprise any RC enthusiast! It can conquer almost any terrain just like the high end 4×4 Crawlers!
9v Battery for Robotics Projects
QUICK OVERVIEW
Constant 9V Output till lasts
Metal Jacket Body
Good Built Quality and hence Leakproof
Easy to install and Replace
Corrosion free Connector Point for long-term use
0% Mercury and Cadmium. Environment-friendly
OEM Compatible.
DJI FPV Front Right Landing Gear
Right front landing gear repair replacement for DJI FPV Combo drone
Used to replace your broken landing leg
No color difference, easy to install
Package include:1pc right front landing gear,1pc L wrench
DJI FPV Drone Middle Body Frame
Made of high-quality materials, reliable and durable
Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free
Perfectly fit for your DJI FPV Drone
Long service life and easy installation
DJI Air 2S Front Left Arm With Motor
Genuine DJI Repair Part
Left-Front arm for DJI Air 2S
Profesional Installation experience required
Only compatible with DJI Air 2S, Not suitable for DJI Air 2 Model
DJI Air 2S Yaw Arm
Gimbal Yaw arm for DJI Air 2S
DJI Air 2S GPS IMU Cable
1pcs IMU cable for DJI Mavic Air 2S
The product is compatible with DJI AIR 2S
DJI Mini 2 PTZ Camera Signal Transmission Cable
Genuine and Brand New
Compatible with DJI Mavic Mini 2 ONLY
High quality video signal cable for DJI Mavic Mini 2
Easy to install and dismount.
Good compatibility and fits well
DJI Mini 2 Rear Right Arm With Motor
Original Right-Rear arm replacement for DJI mini 2
Brand new drone arm with motor and wire
Perfect replacement for DJI mini 2 drone repairing
Package include: Right-Rear Arm
DJI mini 2 Power ESC board module
Original Power ESC board module for DJI mini 2 for Replacement
Professional Experience required for replacement
Only suitable for DJI Mini 2
DJI Mini 2 GPS IMU Board
Mini 2 GPS + IMU module board
Mini 2 GPS Module Glonass Positioning – and IMU, Inertial Measuring Unit
Replacement Part for repair for DJI Mini 2
Doesn’t work with DJI Mavic Mini
DJI Mavic Mini Rear Left Arm
1.100% Original fully compatible replacement arm assembly for DJI Mavic Mini.
2.Perfect repair your drone after crash.
3.Please kindly confirm the correct motor arm before purchase.
4.Package included: 1 X Motor Arm with Wiring( Left Rear).
DJI Mavic Mini Front Left Arm
100% Original fully compatible replacement arm assembly for DJI Mavic Mini.
Perfect repair your drone after crash.
Please kindly confirm the correct motor arm before purchase.
Mavic Mini Motor Arm with Wiring ( Front Left).
DJI Mavic Mini Middle Body Shell
1.Middle Frame Shell for DJI Mavic Mini.
2.High quality, 100% original and new.
3.Perfect repair your drone after crash.
4.Package included: 1 X Middle Frame Shell for DJI Mavic Mini
DJI Mavic Mini Upper Body Shell
New high-quality accessories
Suitable for replacing damaged body parts of DJI Mini 2
The replacement process needs to be cautious, it is best to have professional skills
Compatible with DJI Mini 2
Product include: 1 piece Upper Cover
DJI Mavic Mini Lower Body Shell
DJI Mavic Mini Lower Body Shell
A DJI PRODUCT
Lower Frame Shell for DJI Mavic Mini.
High quality, 100% original and new.
Package included: 1 X Lower Frame Shell for Mavic Mini
Solar Toys Car 1 Set Mini Solar Powered Toy DIY Car Kit Children Educational
Features:-
- Self-assembly required.
- It is a DIY Solar Power forward car, open a spare parts package, handmade, you can make a solar car as the picture shown,
- Without the battery.
- In the summer sunlight, you can move forward, the car’s speed is not fast, run more stable torque, with some climbing ability.
- Mini Size, convenient to store and carry
- Solar power supply, don’t need a battery, the car will run under the sun
- It can improve children’s abilities of creativity and practice
- It is not a finished car , you need to DIY by yourself
- Material: ABS
- Size: approx. 8.0cm*7.5cm*3.2cm
- Net Weight: 50g.
Mini Electric Drill Chuck 0.3-4mm Jto Taper-Mounted Lathe PCB Drill Press for Motor Shaft Connecting Rod 3.17mm
Features:-
- Color: as picture.
- Material: High Carbon Steel.
- outside diameter: 21.5mm.
- Taper: 2 degrees 49 minutes 24.7 seconds.
- work with 0.3mm-4mm (0.01 “”-0.16″”) Drilling Rigs.
- the maximum tightening: 4.2mm.
- Connection size: JT0 (inner hole diameter is 6mm).
- JT0 larger diameter final cone: 6.350mm.
- JT0 cone Smallest diameter end: 5,800mm.
- 3.17mm Brass Mini Electric Motor Shaft.
XF40 750W 48V MXUS Electric Bike Bicycle Rear wheel Hub motor DIY Conversion Kit
Features:-
- Model: MXUS Motor XF40
- Rated Voltage: 48V,
- Rated Power: 750W,
- Magnet height: 27H/30H,
- Wheel size: 20-28inch
- Rated Speed:32km/h
- Weight: 6kg
- Open size: 135mm
- Surface: lace/Silver,
- Compatible Brake type: Disc brake.
Unite MY6812 12VDC 150W, 2750 RPM Electric Motor (Chain)
Features:-
- 9 tooth sprocket for #25 chain
- Loaded RPM: 2600-3000
- Efficiency: 70%
- Weight: 1.4 Kg.
3 Pieces Hss Steel Step Cone Drill Titanium Bit Set Hole Cutter Triangular Shank
Features:-
- Surface treatment: Titanium plating
- Set of 3 for jobs of all sizes.
- 2 fluted edges for faster, smoother cutting.
- 3 sided shanks prevent slippage when in the chuck.
- Made from high-quality HSS steel.
- Quantity: 1 set (3pcs).
5pcs x NFC Sticker tags 13.56MHz ISO14443A 25mm Ntag213 RFID NFC tag
Features:
- Chip: Ntag213.
- Physical capacity: 180 bytes.
- Usable capacity: 144 bytes.
- Protocol: ISO14443A.
- Working frequency: 13.56 MHZ.
- Reading and writing distance: 1 to 5 cm.
- Reading and writing time: 1 to 2 ms.
- Working temperature: -20 to 55 degrees, the humidity of 90%.
- Erase times : > 100000 times.
- Data storage: > 10 years.
- Reading time: 100000 times.
- Diameter: 25mm.
Xbee Base Board USB Output
Features:
- Compatible with all ZigBee modules (Series 1 and Series 2.5, standard and Pro)
- The built-in 3V3 Voltage regulator
- Onboard 3V3 <->5V level converter (easy to interface 5V Devices)
- Status LEDs ( RX,TX,RSSI,Power)
- Zig Bee Pins available at 2.54 mm berg strip
- All XBee pins are broken out.
- Reset button.
Antenna GSM-6DBI (Spring)
Feature
- Frequency (MHz) 824 – 960 MHz & 1710 – 2170 MHz
- Gain : 6 dBi
- Connector: SMA- Male
- Impedance (Ω): 50
- VSWR: < 2.0
- Cable Length: 3 meter.
TB6560 4 Axis Cnc Controller 4 Axis Stepper Motor Driver DSP Controlled 3.5A 24V
Features
- Rated maximum output: ± 4.5A, 40V, Peak 5A, low output impedance, source 0.5?,
- the receiving end of 0.4?, low voltage shutdown, thermal parking and circulation.
- circuit protection. After I design, you can set the current output of 0.5A 1A 1.8A 2.5A.
- 3.3A 4A 4.5A to accommodate more and different motor Current.
- The drive is suitable software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Rain Drop
Features
- Operating voltage: 5V
- Provide both digital and analog output
- Adjustable sensitivity
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- Bolt holes for easy installation
Current Sensor ACS712 5AMPS
Features
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
SimonK 30A 2-3S Brushless ESC For RC Model (High Quality)
Features
- MODEL: STANDARD 30A BLDC ESC ELECTRONIC SPEED CONTROLLER
- WEIGHT: 23g
- DIMENSIONS: 45 x 24 x 9 mm(LxWxH)
- Color: Yellow/Red(Depends on Availability)
- CURRENT (A): 30A
- BEC: 3A
- Li-Poly: 2-3
- Ni-Mh/Ni-CD: 4-10 Ni-Mh
- CONSTANT CURRENT: 30A Max 40A<10s
- Li-Poly 2-3 CELLS; Ni-MH 4-10 CELLS Auto Detect
- Break On/Off
A2212 China Motor 2200KV
Features
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
USB Power Module 3.3V 5V
Features
- Designed to fit the standard MB102 bread board
- Power Supply comes with On/Off Switch
- Green LED power indication
- Built-in protection against short-circuit through power limiting circuitry
- compatible with 5V, 3.3V
- Input Voltage :6.5-12V (DC) or USB power
- Output voltage: 3.3V, 5V switchable
- Maximum Output Current: <700ma
- Two way independent control
- Output VoltageCan be switched to 0V, 3.3V, 5V
1 CHANNEL 12v relay
Features
| Trigger Voltage (VDC) | 12 |
| Trigger Current (mA) | 20 |
| Switching Voltage (VAC) | 250@10A |
| Switching Voltage (VDC) | 30@10A |
| Operating Temperature (C) | -40 to 85 |
| Opt. Relative Humidity(RH) | 20% 85% |
| Storage condition () | 65 to 125 |
| Length (mm) | 48 |
| Width (mm) | 29 |
| Height (mm) | 17 |
| Weight (gm) | 15 |
Mini 3A DC-DC Converter Step Down Module
Features
| IC Chip | MP1584EN |
| Input Voltage (V) | 4.5 to 28 |
| Output Voltage(V) | 0.8 to 20 |
| Output Current(A) | 3 |
| Typical Output Voltage(A) | 1.8 |
| Typical Switching Frequency(MHz) | 1 |
| Maximum Switching Frequency(MHz) | 1.5 |
| Conversion Efficiency(%) | 96 |
| Output Ripple(mV) | <30 |
Johnson B 60 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 60 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 2.5 |
| Stall Torque(Kg-Cm) | 8 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
Johnson A 100 rpm
Features
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 100 |
| Rated Torque (kg-cm) | 12 |
| Stall Torque (kg-cm) | 35 |
| No-Load Current | 300 mA |