CS 3.5 rpm
| Phase |
Single Phase
|
| Voltage |
12V
|
| Speed |
3.5(RPM)
|
| Mounting |
NUT MOUNTING
|
| Application |
ROBOTICS
|
CS 2000 rpm
Features
| Phase |
Single Phase
|
| Voltage |
12V
|
| Speed |
2000(RPM)
|
| Mounting |
NUT MOUNTING
|
| Application |
ROBOTICS
|
CS 200 rpm
Features
| Phase |
Single Phase
|
| Voltage |
12V
|
| Speed |
200(RPM)
|
| Mounting |
NUT MOUNTING
|
| Application |
ROBOTICS
|
CS 150 rpm
Features
- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 150 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2
- Stall Torque(kg-cm): 7.8
CS 1000 rpm
Features
- RPM: 1000.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- gearbox covered and lubricated with lithium grease
CS 10 rpm
Features
- RPM: 10.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 7 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
Planetary 100 rpm
Features
- Output RPM: 100 rpm
- Stall Torque: 2.5 Kg/cm
- Stall Current: 750 – 800 ma
- Motor body Length: 75mm
- Motor Body Diameter:35mm
- Material: Cast Iron
- Shaft diameter: 6mm
- Working Voltage: 12V
Planetary 10 rpm
Features
- Rated Torque (kgcm): 23
- Stall Torque(kgcm): 90
- Rated Voltage: 12 V
- Rated current: 1.2 A
- Stall Current: 14 A
- Weight: 975 gm
Combo Kit – MY1016 250W Motor Kit
Features
- rated speed (rpm) :2650 +/- 5 %
- rated current : ≤ 13.7A; current without load :0.7 – 1.4 A
- rated torque :0.87 Nm
- transmission :chain sprocket (11 teeth, pitch 1/4″=6,35 mm), exchangeable, fixation nut shaft diameter :10 mm (milled groove one-sided 1,5 mm)
Combo Kit – MY1016Z2 250W Motor Kit
Features
- 24 Volt DC Operation
- Permanent Magnet DC Motor
- Direct Drive (No Free Spooling)
- Suitable for forwarding and Reverse Operations
- Base Mount Model
- 9 Tooth Sprocket for 1/2 x 1/8 Pitch Chain
- This motor is capable of rotation in either clockwise or counterclockwise by reversing the motors power wires.
Throttle
Features
Red Supply
Black GND
Green Signal
Power Lock / Ignition Key Switch – 2 pin Female, Plastic
Features
| Connector | 2 Pin Female |
| Wire Length | 270mm |
| Total Lock Length | 325mm |
| Plug Dimensions | 11mm x 6mm |
MY1020 36v 1000W
Features
- 100% brand new and high quality
- Rated Voltage: 36 V
- Rated Power: 1000W
- Rated Speed: 3000RPM
- Rated Current: 26.7A
MY1016ZL Electric Wheelchair PMDC Motor 24 250W
Features
- Rated outputPower 250W
- RatedVoltage 24V DC
- Rated speed3000RPM
- No loadspeed 3850RPM
- Full loadCurrent ~13.4A
- No loadCurrent ~2.2A
- Rated Torque8.0N.m
- Efficiency ~78%
Controller – 24v 600W
Features
| Compatible for Motor | MY1020 600W |
| Body Material | Aluminium |
| Cable Length (cm) | 10 |
| Current Limit (A) | 33 |
| Rated Voltage(V) | 24 v DC |
| Under-Voltage Protection (V) | 20 V |
| Weight (gm) | 215 |
| Dimensions in mm (LxWxH) | 83 x 70 x 38 |
| Rated Power (W) | 600 |
Controller – 24v 350W
Features
- Rated voltage: 24 v DC
- Current limit: 33A
- Rated power: 350 w
- Matching motor: dc brushed motor
- Under Voltage Protection: 20V
Controller – 24v 250W
Features
- Rated voltage: 24 v DC
- Current limit: 33A
- Rated power: 250 w
- Matching motor: dc brushed motor
- Under Voltage Protection: 20V
MY1418ZXF 750 W Motor KIT
Features
- Rated Voltage (V): 48
- Rated output power: 750w
- Speed after Reduction (RPM): 480
- Gear Ratio: 1:6
- Full Load Current (mA): 20A
DC 48V 350W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features
-
Model: BM1412ZXF
-
Rated Output Power -1500W
-
Rated Voltage – 48V DC
-
Speed after Reduction – 555 RPM
-
Rated Speed – 3000 RPM
-
Gear Ratio – 1:5.4
-
Full Load Current – 26.2/21.10A
65 Teeth Wheel Sprocket for #25 chain and 54mm Freewheel for MY1016
Features
- 65T Wheel Sprocket
- Weight: .24kg
- Type of chain: #25
- Freewheel: Optional
- Inner Diameter: 54mm
- Outer Diameter: 133mm
Non Unite 500W MY1020 24V Motor
Features
- Supply Voltage: 24v.
- Current Draw (Rated): 27.4A.
- Current Draw (No Load): 2.5A.
- Rated (constant) Torque: 190 N-cm.
- Speed: 2500 RPM.
- Efficiency: Greater than 75%.
- Weight: 4.10 Kg
UNITE MY1020 500W 24v Motor
Features
- Supply Voltage: 24v.
- Current Draw (Rated): 27.4A.
- Current Draw (No Load): 2.5A.
- Rated (constant) Torque: 190 N-cm.
- Speed: 2500 RPM.
- Efficiency: Greater than 75%.
- Weight: 4.10 Kg
MY1418ZXF 350 W Controller
Features
- Compatible Motor: Hub Motor
- Body Material: Aluminium
- Rated Voltage: 24 V
- Rated Power: 350 W
MY1020Z 600W 36v Motor
Features
- Model: MY 1020Z2.
- Supply Voltage: 36V.
- Output Power: 600W.
- Speed: 480RPM.
- Full Load Current: 21.40 Amp.
- Torque: 1.80 N.m.
- Efficiency: 78%.
350W Hub motor DIY Conversion Kit 26″ Wheel 36V
Features
- 36v 350 watts More Powerful Gear Motor Kit
- Accleration Handel with voltage Display & Key Lock
- 30-35 km/hr Top Speed
- Pedal assist for more backup Mileage
- High Power Led
25H Chain for Ebike Scooter 1/2″ x 1/8 ” x 38 Links
Features
- #25 or #25H Chain
- Length: 2.3 Feet (Full Length: 4.6 Feet)
- Link: 1/2″ x 1/8 ” x 114 Links
- for pocket bike, gas or electric scooter, ATV, Quad, Mini Pocket Bike, super bike
250W Electric Wheelchair Powertrain PMDC Motor – SCD2-A
Features
- Model: ZD101AZ1-250W24V
- Shaft Type: Key Shaft
- Working voltage: 24V.
- Power: 250W
- No Load Current: 4Amp
- Rated Current: 13.4A
- Rated Torque: 20 Nm.
- Reduction Ratio: 25:1
Non Unite 350W MY1016 24V Motor
Features
| Model | MY1016 350W |
| Operating Power | 350W |
| Operating Voltage | 24V DC. |
| Rated Current(A) | Full load Current: ≤18.7A, No load Current: ≤2.5A. |
| No load Speed | 3300 RPM |
| Rated Speed(RPM) | 2750 RPM. |
| Rated Torque | 1.5 N.m (15.0 kg.cm). |
| Stall Torque(Kg-Cm) | 5.25 N.m (52.50 kg.cm). |
| Weight (Kg) | 2.56 |
| Efficiency | ≥78%. |
UNITE MY1016 350W 24v Motor
Features
- Output Power: 350W.
- Supply Voltage: 24/36V DC.
- Speed: 2750 RPM.
- No load speed: 3300RPM.
- Full load Current: ≤19.20A.
- No load Current: ≤2.5A.
UNITE MY1016Z2 250W 24v Motor
Features
- Output Power: 250 Watt.
- Rated Voltage: 24V
- Rated Speed: 360 RPM
- Full load Current: ≤13.4A
- No load Current: ≤2.2A
- Torque Constant: 0.8 N.m
Non Unite 250W MY1016 24v Motor
Features
| Model | MY1016 |
| Operating Power | 250 W |
| Operating voltage (V DC) | 24 |
| Rated Current (A) | ≤ 13.7A |
| Rated Speed (RPM) | 2650 +/- 5 % |
| Rated Torque (N-m) | 0.87 Nm |
| No load Current (A) | 0.7 – 1.4 A |
| Transmission | Chain sprocket (11 teeth, pitch 1/4″=6,35 mm) |
| Weight(g) | 1900 |
UNITE MY1016 250W 24v Motor
Features
- Output Power: 250W.
- Supply Voltage: 24V DC.
- Rated speed: 2650RPM.
- No load speed: 3000RPM.
- Full load Current: ≤13.7A.
- No load Current: ≤2.2A.
200W Electric Wheelchair Powertrain PMDC Motor – SCD2-B
Features
- Power Source: DC
- RoHS Compliant
- Material: Epoxy
- Weight: 4000
200W Electric Wheelchair Powertrain PMDC Motor – SCD1
Features
- With small size
- low speed high torque output
- low noise
- high reliability
- easy maintenance
16 Teeth Freewheel Sprocket with connector
Features
Weight: .14kg
Type of chain: 410
Freewheel: Optional
Inner Diameter: 34mm
Outer Diameter: 68mm
MY6812 100W
Features
- Voltage : 12V
- Rated Power : 120W
- No load current : < 0.55A
- Rate torque : 4.58 KgCm(0.45N.m)
- Rate current : < 7.0A
- Efficiency : >70%
- Shaft diameter: 8 mm (milled groove one-sided 1 mm)
- 100% Ball Bearing construction!
- Speed: 3350RPM.
- Weight: 1.06Kg.