Home Shop Page 24
Showing 829–864 of 1014 results
Features
Input voltage: 4.7V TO 5.3V
Operating voltage: 5V
Current consumption is 1mA without backlight
Consist of 2 rows and each row can print 16 characters
Can display alphabets and numbers, i.e. alphanumeric
Viewing area: 99*24mm
Character size: 5.2*9.55mm
Each character build by5*8 pixels
Works on both 8 bit and 4 bit
Features
Model Number
16X2 LCD
Display Size
16 X 2
Usage/Application
DISPLAY
Backlight Color
Green
Features
Input voltage :10-32V
Output voltage: 12-35V (adjustable)
Output Current: 10A (MAX)
Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
The non-isolated step-up power conversion module
Onboard LED illuminates when the voltage is applied to the module
Equips Multi-turn Potentiometer.
Features
Frequency
12000HZ
Control Motor Power
0.01-2000W
Rated Current
40A(Maximum output current)
Regulation Range
5-100 %
Length (mm)
90
Width (mm)
51
Height (mm)
30
Weight (gm)
93
Features
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for avoidance of malfunction
Power supply indicator and Control indicator lamp
Channel: 8 channel
Relay Operating Voltage: 5V
Features
Easy To Use
Works with Most Microcontrollers
Built-in Controller (KS0108B)
5V Power Supply
1/64 Duty Cycle
Built-in Backlight
Ideal for Moving Displays & Graphics
Good Value for money
Features
Input Current : 100A
Frequency: 50HZ-150KHZ
Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
Output Plug 3.5mm
Dielectric Strength 6000V AC/1min
Meet UL94-V0 flame retardant properties
Features
1 channel relay board
Operating Voltage 5V
Max Current : 20mA
Relay Contact Current Capacity at AC250V: 10A
Relay Contact Current Capacity at DC5V: 10A
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
High impedance controller pin
Pull-down circuit for avoidance of malfunction
Power supply indicator lamp
Control indicator lamp
Features
Trigger Voltage (VDC)
12
Trigger Current (mA)
20
Switching Voltage (VAC)
250@10A
Switching Voltage (VDC)
30@10A
Operating Temperature (C)
-40 to 85
Opt. Relative Humidity(RH)
20% 85%
Storage condition ()
65 to 125
Length (mm)
48
Width (mm)
29
Height (mm)
17
Weight (gm)
15
Features
Driver IC
SSD1306
Low power consumption
0.04W
voltage
3.3V-5V DC
Working temperature
-30-80 degrees
Communication
IIC
Dimension(cm)
2.7 cm x 2.7 cm x 0.41 cm
Features
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Display Color: Area Color (Blue)
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Only Need 2 I/O Port to Control
Full Compatible with Arduino
Working temperature: -30°C ~ 70°C
Module volume ( generous ): 2.7 cm x 2.7 x 0.41 cm
Features
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Display Color: Area Color (White)
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Only Need 2 I/O Port to Control
Full Compatible with Arduino
Working temperature: -30°C ~ 70°C
Interface: I2C
Features
Super High Brightness (Adjustable)
Super High Contrast (Adjustable)
Embedded Driver/Controller
Display size: 2.44 cm (0.96 Inch)
Resolution radio:128 x 64
Interface modes: I2C/IIC
working voltage: 3.3V
Control Chip: SSD1306
Features
IC Chip
MP1584EN
Input Voltage (V)
4.5 to 28
Output Voltage(V)
0.8 to 20
Output Current(A)
3
Typical Output Voltage(A)
1.8
Typical Switching Frequency(MHz)
1
Maximum Switching Frequency(MHz)
1.5
Conversion Efficiency(%)
96
Output Ripple(mV)
<30
Features
Contactless transmission of data and supply energy (no battery needed)
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Data transfer: 106 kbit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Anticollision
Features
Voltage: 4.5-5.5V
Current: <40mA
Digital Interface: 5V
TTL level UART interface
Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface
Size: 30mm x 47.5mm
Features
16 Characters x 2 Lines
Blue Backlight
5×7 Dot Matrix Character + Cursor
HD44780 Equivalent LCD Controller/driver Built-In
4-bit or 8-bit MPU Interface
Standard Type
Works with almost any Microcontroller
Features
Brand
Graylogix
Model
Resistive Touch Screen
Item Weight
100 g
Product Dimensions
10.2 x 7.6 x 5.1 cm
Item model number
Resistive Touch Screen
Compatible Devices
Aurdino, 8051, PIC, AVR, Raspberry PI and all other Microcontrollers.
Included Components
Fargo Maestro 20 GSM/GPRS Modem, Power Connector, Serial Cable and Antenna`
Number Of Items
1
Features
This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
Dimensions : 62.5 x 25.4 x 3 mm.
Weight : 9 gm.
Terminal block for power input (or you can use the 0.1″ breakouts on the side)
Reverse polarity protection on the terminal block input
Green power-good LED
3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1″ so you can only stack 4 next to each other on 0.1″ header
“Chain-able” design
Features
Model No.
N20-12V-300
No Load Current (mA)
0.06 A
Stall Current (A)
0.75
Rated Torque(kg-cm)
0.4
Stall Torque(Kg-Cm)
1.2
Motor Body Size (Diameter) (mm)
12
Operating Voltage (VDC)
6 ~ 12
Rated Operating Voltage (VDC)
12
Rated Speed (RPM)
300
Features
Voltage range:3-6V
This is a DC Mini Metal Gear Motor, ideal for making robots
Lightweight, high torque and low RPM.
Fine craftsmanship, durable, not easy to wear.
With excellent stall characteristics, can climb hills easily.
You can also easily mount a wheel on the motor’s output shaft.
Features
Model No.
N20-6V-400
No Load Current (mA)
0.04 A
Stall Current (A)
0.67
Stall Torque(Kg-Cm)
0.65
Rated Torque(kg-cm)
0.18
Motor Body Size (Diameter) (mm)
12
Operating Voltage (VDC)
3 ~ 6
Rated Operating Voltage (VDC)
6
No load Speed (RPM)
400
Features
Model No.
N20-3V-500
Motor Type
Center Shaft DC Geared Motor
Rated Operating Voltage (VDC)
3
No Load Current (mA)
0.01
Stall Current (A)
0.1
Rated Speed (RPM)
400
Operating Voltage (VDC)
1.5 ~ 5
Rated Torque(kg-cm)
0.05
Stall Torque(Kg-Cm)
0.4
No load Speed (RPM)
500
Features
Shaft length: 7 mm
Motor Design: L-Shaped
Shaft Diameter: 5.5 mm
Size: 55 x 48 x 23 mm.
Operating Voltage: 3 to 12V
Current (without loading): 40-180mA
RPM: 300 rpm
Output Torque: 0.35 kg cm.
Features
Heavy Duty Metal Gears.
Uniformity of parts.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Relatively low coefficient of friction.
Corrosion-resistance; elimination of plating, or protective coatings.
Features
Heavy Duty Metal Gears.
Uniformity of parts.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Relatively low coefficient of friction.
Corrosion-resistance; elimination of plating, or protective coatings.
Features
Heavy Duty Metal Gears.
Uniformity of parts.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
Relatively low coefficient of friction.
Corrosion-resistance; elimination of plating, or protective coatings.
Features
RPM: 60.
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur)Gearbox
Shaft diameter: 6mm with internal hole
Torque: 2 kg-cm
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
Features
RPM: 500.
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur)Gearbox
Shaft diameter: 6mm with internal hole
Torque: 1 kg-cm
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
Features
RPM: 30.
Operating Voltage: 12V DC
Gearbox: Attached Plastic (spur)Gearbox
Shaft diameter: 6mm with internal hole
Torque: 2 kg-cm
No-load current = 60 mA(Max)
Load current = 300 mA(Max).
Features
It comes with Good Quality Gears.
The metal gears have better wear and tear properties.
Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
The shaft has a hole for better coupling.
Features
RPM – 45
Rated Voltage – 12 V DC
No Load Current – 600 mA
Full Load Current – 14A
Stall Torque – 90 kgcm
Number of Gear Trains – 3
Base Motor RPM – 5000
Features
RPM:350
Rated Voltage: 12 V DC
No Load Current: 600 mA
Full Load Current:14A
Stall Torque :28 kg-cm
Number of Gear Trains: 2
Base Motor RPM:5000
Brushed permanent magnet DC motor
Variable speed and reversible
Planetary Gear Box
Features
Voltage – 18v-30v
RPM – 75 (at 24v)
Nominal Voltage – 24v
No- Load Current – 35mA
Full Load Current – 800mA
Full (Stall) Load Torque – 10 kgcm
Features
Voltage ? 18v-30v
RPM – 30 (at 24v)
Nominal Voltage – 24v
No- Load Current – 35mA
Full Load Current – 800mA
Full (Stall) Load Torque – 20 kgcm
Features
Output RPM: 10 rpm
Stall Torque: 18 Kg/cm
Stall Current: 750 – 800 ma
Motor body Length: 75mm
Motor Body Diameter:35mm
Material: Cast Iron
Shaft diameter: 6mm
Working Voltage: 12V
