Red TTP223 Touch button Module
Features
- Supports momentary or latching/toggle modes.
- Supports Active High or Active Low output signal modes.
- Dimensions : 15mm x 11mm.
- Input Voltage : 2 Volt – 5.5 Volts DC.
- The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
- Sensitivity can adjust by the capacitance(0~50pF).
- Have two kinds of sampling length by pad option(SLRFTB pin).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides Fast mode and Low Power mode selection by pad option(LPMB pin).
- Provides direct mode、toggle mode by pad option(TOG pin).
- Open drain mode by bonding option, OPDO pin is open drain output, Q pin is CMOS output.
- All output modes can be selected active high or active low by pad option(AHLB pin).
- Have the maximum on time 100sec by pad option(MOTB pin).
- Have external power-on reset pin(RST pin).
RFID EM18 125KHz RS232 Output
Features
- Operating Voltage: 5V DC Supply
- Reading Distance: 6-10 cm.
- Read frequency: 125 kHz.
- EM4001 64 – bit RFID tag compatible.
- 9600bps ASCII output.
- Current : <50 mA
- Operating Frequency : 125 Khz
- Read Distance : 5 cm
- Compatible Tags : 125KHz EM4100 Tags
- Size : 32mm(length) * 32mm(width) * 8mm(height).
RFID Tag Key Fob Keyfobs 125Khz
Feature
- Material: ABS
- Response Frequency: 125Khz
- 2kbps ASK
- Diameter: ~29mm
- Range: 0-10 cm
- Manchester encoding
- 32-bit unique ID
- Uses TK4100 chip which is compatible with EM4100
- 64-bit data stream [Header+ID+Data+Parity]
- Read Time: 1-2ms.
RGT 1/10 Scale RC4 Jimny Rock Cruiser V3 – RTR
Based on the RC4 V2 platform, this all new fantastic Rock Crawler from HSP/RGT has incorporated a complete re-design and has upgraded parts from the predecessor V2 models in the V3 version resulting in the Rock Cruiser RC4 V3 offering significantly improved Off-Road 4WD capabilities with greater performance. This is further to the already extensive feature list; such as the integrated chassis rail, the steel solid link, all bearing, precise universal transmission and adjustable oil shock to name a few.
Ribbon Cable per meter
Features
- Length: 1 Meter
- Weight: 130 gm
- Conductor Material: Copper
- Compatible with 2.54mm spacing pin headers
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Robodo – Arduino Mega 2560 RFID starter kit learning suite V2
Features:
- Microcontroller: ATmega2560
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB.
- Clock Speed: 16 MHz
- USB Host Chip: MAX3421E
- Length:101.98mm/4.01in
- Width:53.63mm/2.11in
- Height:15.29mm/0.60in.
Robodo – Arduino RFID learning kit V4 with Instruction CD & Uno R3
Features:
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming.
- A variety of components are included in this pack to try out different projects.
Robodo – Arduino RFID learning kit V5 with Instruction CD & Uno SMD
Features:
- All-in-one kit, a great starter kit for learning to code.
- Great for Starting with Arduino Programming.
- A variety of components are included in this pack to try out different projects.
Robodo – Basic Starter Kit for arduino Starter with UNO R3
Features:
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
- All-in-one kit, a great starter kit for learning to code.
- Microcontroller ATmega328 (SMD) – Interface CH340G.
RPI Transparent case
Features
- This simple case provides tough protection for your raspberry pi along with access to ports
- High Quality two-piece injection-molded ABS enclosure
- Click together design, no screws, standoffs or elastic bands required
- It is easy to use. You just need to click them together after you fix your pi board on it with screws.
- 4 x Non-slip Silicone Gaskets provided, which can be stuck to the bottom four corners of the box, to prevent it from slipping when placed on a surface.
RS232 TO RS485 Convertor
Features
- Transmission distance: 1.2 mile (RS-485), 5 meters(RS-232)
- Transmission Speed: 300-115200 bps
- Working Modes: Asynchronous, half-duplex, differential transmission
- Transmission Media: Common wire, doule wire, UTP or Shielding Line
- Work Environment: -10°C to 85°C
RS37 10 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 10 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 100 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 100 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 200 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 200 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 30 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 30 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 300 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 300 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 500 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 500 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS37 60 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Shaft Diameter (mm) | 6 |
| Rated RPM (at 12V) | 60 |
| Rated Torque (Kg-cm) | 40 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Full (Stall) Load Torque (Kg-cm) | 100 |
| Gearbox Length (mm) | 27 |
RS50 10 rpm
Features
| Voltage | 12 V |
| Power Source | DC |
| Model Name/Number | 10 RPM RS-50 High Torque Side Shaft DC |
| Brand | Probots |
| Material | Metal |
| Speed | 10 RPM |
| Motor Type | DC |
RS50 200 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 200 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
RS50 30 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 30 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
RS50 300 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 300 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
RS50 60 rpm
Features
| Operating Voltage Range | 6V to 15V DC |
| Recommended Voltage (DC) | 12V |
| Rated RPM (at 12V) | 60 |
| Rated Torque (Kg-cm) | 4 |
| Full (Stall) Load Torque (Kg-cm) | 20 |
| No- Load Current (A) | 0.2 |
| Full Load Current (A) | 1.2 |
| Base Motor Dimensions (mm) | 35.5 x 58 (Diameter x Length) |
| Gearbox Dimensions | 50.5 x 34.5 (Diameter x Length) |
| Motor Shaft Length (mm) | 21 |
SC10UU Linear Slide / Motion Bearing / Block
Features
- Product Name: Linear Bearing
- Model: SC10UU
- Material: Metal, Rubber
- ID: 10mm.
SC16UU SCS16UU 16mm Linear Ball Bearing
Features:
- Model: SC16LUU
- Ball Circuit: 4
- Inner Diameter (mm): 16
- Length (mm): 85
- Outer Casing: Chromium Steel
- Linear bearing ball cage, hardened coat of both ends ring.
- Safe and reliable operation.
SC8UU Linear Slide block
An SC8UU 8mm Linear Ball Bearing Slide Unit CNC 3D Printer for use on hardened steel shafts. Ideal for small CNC applications as well as X / Y tables. The universal Ball Bearings is great for you to replace the damaged Ball Bearings in your devices to improve the efficiency and save energy.
Widely used in home appliances, industrial, low noise and high-speed electric motors, construction machinery, automotive components, pumps, and machinery. Smooth moving, low friction, high rigidity, and long life. Economical, easy to maintain replace.
SEN-HZ21WI DN15 1/2 Copper Water Flow Sensor Output Flow Sensor Switch
Features:-
- Model: SEN-HZ21WI
- Material: Copper
- Colour: Gold
- Type: 1/2(External Thread Diameter)
- Water quality requirement: ≤60℃
- Flow range: 1-30L/min
- Maximum water pressure: 1.75MPa
- Three-wire connection: Red for positive pole, black for negative pole, yellow for pulse signal
- Lightweight, reasonable size, stable performance, low water pressure start, easy to install, safe to use
- Weight: approx. 95g.
SEN-PPI150 PP vertical magnetic water level switch liquid level switch float level switch
Features:-
- Model Number: SEN-PPI150.
- Rated voltage: Below DC24V.
- Installation method: vertical.
- 10W, normally open type.
- Float Ball diameter 24mm
- Fixed Screw M10.
- Switch response time: 0.2ms.
- Colour: white colour.
- Material: Plastic PP.
SEN-PPI35 PP Aquarium Liquid Water Level Sensor Float Switches Normally Open
Features:-
- Model: SEN-PPI35
- Thread: M10
- working current: 0.5A
- Contact Resistance: 0.2Ω
- Wiring Type: 2 wire output
- Working Voltage: DC 110V
- Contact form: NO (Normally Open)
- Temperature: -20℃-80℃
- Material: plastic
- Switch Length: 61mm/2.1inch
- Cable Length: 340mm/13.4inch.
Serial TO TTL MAX3232
Features
- IC Chip: MAX3232
- Operating Voltage: 3.3-5.5V
- It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
- Pre-assembled compact size board
- Suitable for use with most microcontrollers
- Operates up to 250 kbit/s
Servo bracket PT pan/till camera platform anti-vibration camera mount
Features:
- Supported Motors: 10kg-cm servos (such as MG995, MG996)
- No of Axis: 2 axis
- Weight : 51.2gms
- No of Metallic Pieces: 2
- This product is made of high-quality materials and is durable.
- Various sensors can be installed to complete a variety of novel interactive works through the servo controller.
- It is convenient to install the camera, which can realize image monitoring and image recognition and tracking.
Servo Motor Tester
Features
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
SG 90
Features
- Model: SG90
- Weight: 9 gm
- Operating voltage: 3.0V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 1.2kg-cm
- Stall torque @6.6V : 1.6kg-cm.
SG5010
Features
- Model: SG5010
- Weight: 39 gm
- Operating voltage: 4.8V~ 6V
- Servo Plug: JR
- Stall torque @4.8V : 5.5kg-cm
- Stall torque @6.6V : 6.5kg-cm.
SG90 Servo Motor Bracket SG90 9g Bracket Support
Features:
- Material: Mild Steel(MS)
- Weight: 5 gm (each)
- Length: 35 mm
- Width: 37 mm
- Thickness: 2.7 mm.
