Voice Recognition Module -Arduino Compatible
Features
- Voltage: 4.5-5.5V
- Current: <40mA
- Digital Interface: 5V
- TTL level UART interface
- Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface
- Size: 30mm x 47.5mm
40W solar panel
Features
- Max Power at STC: 30W
- Short Circuit Current : 1.70A
- Optimum Operating Current : 1.60A
- Open Circuit Voltage : 22.9V
- Opitmum Operating Voltage : 19.5V
- Operating Temperature: -40ºC to 90ºC.
Non Unite 250W MY1016 24v Motor
Features
| Model | MY1016 |
| Operating Power | 250 W |
| Operating voltage (V DC) | 24 |
| Rated Current (A) | ≤ 13.7A |
| Rated Speed (RPM) | 2650 +/- 5 % |
| Rated Torque (N-m) | 0.87 Nm |
| No load Current (A) | 0.7 – 1.4 A |
| Transmission | Chain sprocket (11 teeth, pitch 1/4″=6,35 mm) |
| Weight(g) | 1900 |
Leadshine DM320C
Features
- Anti-Resonance, provides optimum torque and nulls mid-range instability
- Motor self-test and parameter auto-setup technology, offers optimum responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
- Microstep resolutions programmable, from full-step to 102,400 steps/rev(Note1)
- Supply voltage up to 30 VDC
- Output current programmable, from 0.3A to 2.0A( Note)
- Pulse input frequency up to 70 KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors.
Raspberry Pi Camera Module V2 – 8 Megapixel 1080p
Features
- Fixed focus lens on-board
- Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
- Uses the Sony IMX219PQ image sensor – high-speed video imaging and high sensitivity
Xbee Module S2C XB24CZ7WIT-004
Features:
- Integrated, Wire Antenna
- Interoperable with other ZigBee-compliant devices
- Programmable versions with onboard microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Data Rate: RF 250 Kbps, Serial up to 1 Mbps
- Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
- Transmit Power: 3.1 mW (+5 dBm)
- Channels: 16 channels.
Finger Print Module Scanner – TTL (GT-521F52)
Features:-
- Simple UART & USB communication protocol.
- Complies with USB 2.0 full-speed specification.
- Ultra-thin optical sensor.
- Resolution 450 dpi.
- Capable of 360° recognition.
- Storage for 3,000 unique fingerprints.
- Wake up on Finger Function.
- Works well with dry, moist or rough fingerprints.
- Anti-scratch with surface high hardness ≧
- 1:1 verification, 1:N identification.
- High accuracy and high-speed fingerprint identification technology.
DJI Mavic Mini Middle Body Shell
1.Middle Frame Shell for DJI Mavic Mini.
2.High quality, 100% original and new.
3.Perfect repair your drone after crash.
4.Package included: 1 X Middle Frame Shell for DJI Mavic Mini
Bluetooth 4.0 Audio Receiver Board Wireless Stereo Sound Module 12V 24V Car
Features:-
- Sound balance:£¼2db
- Transmit power: Class2
- Handsfree protocol:1.6
- Supply voltage: DC 6~30V
- Transmission distance:10~20M
- Frequency response: 80Hz~22KHz
- Size(L*W*H):55 x 50 x 10 mmBluetooth Specification: Bluetooth V3.0+EDR, Support Bluetooth 4.0
FlexiForce Tekscan A401 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
Finger print Scanner Module – TTL (GT-521F32)
Features:-
- Finger window: 12.9 x 16.9 mm.
- Image Size: 258 x 202 Pixels.
- Storage capacity: 200 fingerprints.
- Wake up on Finger Function.
- Anti-Scratch with surface high hardness ≧ 5H.
- Resolution: 450 dpi.
- CPU: ARM Cortex M3 Core MCU).
24V Lithium battery case 350*106*78mm
Features:-
- Dimensions: 350*106*78mm.
- Suitable for battery type: 24V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 24V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
36V/48V Lithium battery case aluminum alloy material 385*110*76
Features:-
- Dimensions: 385*110*76mm.
- Suitable for battery type: 36/48V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
36V/48V Lithium battery case aluminum alloy material 440*135*89
Features:-
- Dimensions: 440*135*89
- Suitable for battery type: 36/48V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
36V/48V Fold bike Lithium battery case 410*100*42mm aluminum alloy material
Features:-
- Dimensions: 410*100*42mm.
- Suitable for battery type: 36/48V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of aluminium alloy and plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
36V/48V/60V Lithium battery case 360*160*100MM APS Plastic materail
Features:-
- Dimensions: 360*160*100mm.
- Suitable for battery type: 36/48/60V.
- Battery standard: 18650 lithium battery.
- Charging voltage: 42V/54.6V.
- Used to install an electric vehicle lithium battery.
- Suitable for electric bicycles, electric bicycles, and folding electric vehicles.
- Made up of plastic, which is sturdy and durable.
- The product has a charging socket and an output port.
SIM900 GPRS/GSM Shield Development Board Quad-Band Module For Arduino Compatible
Features:-
- Quad-Band 850 / 900/ 1800 / 1900 MHz – would work on GSM networks in all countries across the world.
- Control via AT commands – Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
- Short Message Service – so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
- Embedded TCP/UDP stack – allows you to upload data to a web server.
- Industrial Temperature Range – -40°C to +85 °C.
DJI Mini 2 Upper Body Shell
New high-quality accessories
Suitable for replacing damaged body parts of DJI Mini 2
The replacement process needs to be cautious, it is best to have professional skills
Compatible with DJI Mini 2
Product include: 1 piece Upper Cover
DJI Mini 2 Flexible 3 in 1 Flat Cable
This flex cable pack is compatible with DJI mini 2 drone.
Original replacement mini 2 flat cable.
DJI Mini 2 gimbal cable pack.
PH Sensor Module & PH electrode Probe for Arduino, AVR, PIC
Features:
- Module Power: DC 5.00V.
- Measuring Range: 0-14PH.
- Accuracy: 0.01 pH
- Response Time: ≤ 1min.
- Industry pH Electrode with BNC Connector.
- Power Indicator LED.
- Output: Analog values in the range of (0.5V to 3V).
- Alkali Error: 0.2PH.
- Internal Resistance: 250MOhm.
- Gain adjustment Potentiometer.
- Measuring Temperature: 0 degrees to 50 degrees C
- Terminal Blocks: BNC plug.
Controller for 350W 36V Hub Motor – Electric Bike Bicycle
Features:-
- Voltage: 36V.
- Wattage: 36V 350W.
- Throttle: 1-4V.
- Short voltage protect: 30V.
- Colour: silver.
- Casing material: Aluminium.
- Note: It will only fit for Motor with sensors.
DJI Mavic Air 2 Gimbal Camera PTZ Signal Cable
Stable connection, excellent performance
Suitable for DJI Mavic Air 2
DJI Air 2S PTZ Camera Signal Transmission Cable
Genuine and Brand New
Compatible with DJI Mavic Air2S ONLY
High quality video signal cable for DJI Air 2S
DJI Mavic AIR 2S Upper Body Shell
100% brand new and genuine DJI repair part
Only suitable for DJI Mavic air 2S drone
Easy to replace your broken one.
DJI Mavic 2 PRO/ZOOM lower Shell
DJI Mavic 2 PRO/ZOOM Lower shell
Original DJI product and new.
This part allows the replacement of the lower shell of the
iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER
B6 Digital LCD RC Lipo NiMh Battery Balance Charger (Blue)
IMAX B6-AC Lipo NiMH Battery Charger/Discharger 1-6 Cells
Features
- AC 100~240v or 12V DC input
- The cables come with a fitted fuse.
- Microprocessor controlled
- Li-ion, LiPo, and LiFe capable
- Input voltage monitoring. (Protects car batteries at the field)
- Battery break-in and cycling feature
- Data storage (Store up to 5 packs in memory)
- Internal resistance checker to see pack health
- Delta-peak sensitivity
- Individual cell balancing
DJI Mavic 2 PRO/ZOOM Upper Shell
DJI Mavic 2 PRO/ZOOM – Upper Shell
Original DJI product and new.
This part allows the replacement of the upper Shell of the DJI Mavic 2 PRO/ZOOM
5” TFT for Raspberry PI
Features
- Display Size: 5″
- Resolution: 800 x 480 pixel
- Supply Voltage: 5V @1A
- Very easy to assemble with Raspberry Pi.
NEMA 34 34 kg-cm
Features
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 67
- Current/Phase A: 5.9
- No of Leads: No. 4
- Shaft type: Keyway Type.
Stepper Motor NEMA 23 23 kg-cm Hybrid Bipolar
Features:
- Phase – 2 phase Bipolar
- Rated Voltage:2.55V
- Current/ phase: 3.5A
- Inductance/ phase: 2.8 mH (20% variance)
- Resistance/ phase: 0.73 Ohms (10% variance)
- Holding Torque: 23 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm.
DJI Mavic Mini Front Left Arm
100% Original fully compatible replacement arm assembly for DJI Mavic Mini.
Perfect repair your drone after crash.
Please kindly confirm the correct motor arm before purchase.
Mavic Mini Motor Arm with Wiring ( Front Left).
DJI Mavic Mini Rear Right Arm
100% Original fully compatible replacement arm assembly for DJI Mavic Mini.
Perfect repair your drone after crash.
Please kindly confirm the correct motor arm before purchase.
for Mavic Mini Motor Arm with Wiring ( Rear Right )
DJI Mavic Mini Front Right Arm
Front Right Arm
Full Arm Assembly with Motor
Compatible with DJI Mavic Mini Only
DJI Mavic Mini Rear Left Arm
1.100% Original fully compatible replacement arm assembly for DJI Mavic Mini.
2.Perfect repair your drone after crash.
3.Please kindly confirm the correct motor arm before purchase.
4.Package included: 1 X Motor Arm with Wiring( Left Rear).
DJI Mini 2 Middle Body Shell
New high-quality accessories
Suitable for replacing damaged body parts of DJI Mini 2
The replacement process needs to be cautious, it is best to have professional skills
Compatible with DJI Mini 2
Product include: 1 piece Middle Body Shell