Offside 5 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 5 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 60 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 60 RPM (at 12V) |
| Shaft length (mm) | 16 |
Optical Endstop Switch
This fully assembled plug and play Optical Endstop Light Control Limit Optical Switch is very suitable for your 3D printing or CNC project. The Optical Endstop Switch will immediately output the digital control when the light is blocked and turn the LED on.
The optical end-stop is a reliable end-stop / switch solution for any type of 3D printers and other CNC and 3D tools. Using optical transmission principle designed, no loss, no noise, and longer service life reached more than one hundred thousand times.
Orange ABS+ 1.75mm 3D Printing Filament 1kg
High Durability
Flexible
Higher Temperature Resistance
Prints smoother & smoother printed objects
Tougher and stronger
Less warping (about 0.4% compared to over 8% in regular ABS)
Orange ABS+ 1.75mm 3D Printing Filament 1kg
Material: The filament is made of Acrylonitrile Butadiene Styrene (ABS+), which is a common thermoplastic polymer used in a wide range of applications.
Diameter: The filament has a diameter of 1.75mm, which is a common size for 3D printing filaments.
Weight: The filament comes in a 1kg spool, which is a standard weight for 3D printing filaments.
Orange eABS – 1.75mm 3D Printing Filament 1kg
The appearance is White, non-transparent.
Non-toxic, tough, hard texture, with good temperature tolerance and creep resistance.
Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.
Orange ePLA – 1.75mm 3D Printing Filament 1kg
Good flow properties
Diameter tolerances of ± 0.1mm checked with laser monitor
Smooth surface with even rounding
Lower melting temperature
Compatible with almost all 1.75mm FDM printers
Easy to use
Orange Glitter PLA+ 1.75mm 3D Printing Filament 1kg
Consistently High Quality
10 times stronger than regular PLA on the market
Deliver exceptional performance
Made from great, high-performance materials
Ready to print on any open source desktop or industrial printer
Orange PETG 1.75mm 3D Printing Filament 1kg
Higher-strength, lower shrinkage, and smoother finish than ABS & PLA
Combines good strength with ductility, making it a good, tough material for mechanical parts
Good chemical resistance
Often features a nice, translucent finish
Contains UV absorber
Good hydrophobicity (doesn’t absorb water easily), good for high humidity storage & usage
Orange PLA+ 1.75mm 3D Printing Filament 1kg
Consistently High Quality
10 times stronger than regular PLA on the market
Deliver exceptional performance
Made from great, high-performance materials
Ready to print on any open source desktop or industrial printer
OV7670 Camera Without FIFO
Features
- MODEL: OV7670 640X480 VGA CMOS CAMERA
- Pixel Coverage: 3.6um x 3.6um;
- Duck Current: 12 mV/s at 6’C
- Support VGA, CIF and from CIF to 40 x 30 format;
- Vario Pixel method for sub-sampling; Auto Image Control: AEC, AGC, AWB, ABF, ABLC;
- Image Quality Control: Color saturation, hue, gamma, sharpness, and anti-blooming;
- ISP includes noise reduction and defect correction; Support image scaling; Lens shading correction;
- Flicker 50/60Hz auto-detection;
- Color saturation level auto adjust;
- Edge enhancement level auto adjust;
- De-noise level auto adjust
Pack of 50 pcs Standard Metal Hss Twist Drill Bits Straigth Shank
Features:-
- Model: Twist Drill Bit
- Surface Treatment: Titanium Coating
- Design: straight shank
- Material: HSS
- Size: 1mm*34mm, 1.5mm*38mm, 2mm*45mm, 2.5mm*55mm, 3.0mm*65mm
- Suitable for wood, aluminium, plastic.
- Straight shank design is more suitable for many electric drills sharp and twisted flute will make the drilling be more easy and effortless.
PAM8403 Version 2
Features
- Dual channel stereo output 3 w + 3 w power Class D
- Works with 2.5V-5v power supply
- High amplification efficiency 85%
- can directly drive 4 O/8 O small speakers
- Good sound quality & noise suppression
- Unique without LC filter class D digital power board
- Can use computer USB power supply directly
- Small Size, 1.85 x 2.11 cm can easily fit in a variety of products
PAM8403 Version 1
Features
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
PAM8406 digital amplifier board 5W×2 volume adjustable D class module
Features:
- The two-channel stereo, 5V power supply can output 5W + 5W power
- Unique non-LC filter Class-D digital power board
- Dual-panel wiring
- Ultra-miniature design
- Solder by machine
- The rated working voltage 2.5-5V, limit operating voltage 5.5V.
PCF8574 I/O FR I2c port interface support cascading extended module
Features:
- This is the I/O extended module used for I2C interface, you can use two of these modules to extend 8 I/O.
- Supports Arduino cascading, and you can use at most 8 modules to extend 64 I/O at the same time.
- Can be changed the address by set toggle switch.
- PCB Size: 36 x 16mm/1.41*0.62″.
- Every 2 seconds, make P0-P7 port output High level, Low level, and put 3 toggle switches to ON, the address of module is 0x27.
PCF8591-ADC-DAC
Features
- Module chip using PCF8951
- Module supports external voltage input of the 4-way acquisition (voltage input range of 0-5v)
- The module integrated photoresistor by AD collection precise value of the ambient light intensity
- Module integrated thermistor by the precise value of the ambient temperature of the AD acquisition
- Module integrated 1 channel 0-5V voltage input acquisition (the blue potentiometer to adjust the input voltage)
- Modules with power indicator (for the module power supply indicator lights)
PH Sensor Module & PH electrode Probe for Arduino, AVR, PIC
Features:
- Module Power: DC 5.00V.
- Measuring Range: 0-14PH.
- Accuracy: 0.01 pH
- Response Time: ≤ 1min.
- Industry pH Electrode with BNC Connector.
- Power Indicator LED.
- Output: Analog values in the range of (0.5V to 3V).
- Alkali Error: 0.2PH.
- Internal Resistance: 250MOhm.
- Gain adjustment Potentiometer.
- Measuring Temperature: 0 degrees to 50 degrees C
- Terminal Blocks: BNC plug.
Photo Control Sensor Automatic Street Light Lighting Switch Photocell Photoswitch
Features:-
- Input Voltage:220V AC
- Max Load Current: 10A
- Frequency: 50-60Hz
- Colour: White & Blue
- Intelligent Sensor Light Control Switch
- The light turns on in the dark and turn off in the daytime, an intelligent sensor, no need to operate by manual.
- Widely use in streets, high-speed expressways, factories, gardens, airports, farms, schools and other places.
- Dimension: 5 x 4.2 x 3.3cm.
PI 3 Model B
Features
-
Onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance.
-
Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards.
-
Onboard headphone jack (extended from USB).
-
Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission.
-
Onboard RJ45 Gigabit Ethernet port, 10 / 100 / 1000 M adaptive.
-
Onboard PoE header, for connecting PoE HATs.
-
DSI interface is DSI1.
-
Micro USB port is for power supply and for programming images USB SLAVE.
-
Please do not connect to other devices when programming the image by micro USB so as to ensure that CM4 can be powered on normally.
-
When using CM4, you need to provide 5V/4A to CM4. Otherwise, it may power off, lower frequency, etc.
-
USB 2.0 is close by default, if used dtoverlay=dwc2,dr_mode=host should be added in config.txt.
-
It only supports 5V fan. (12V is not supported.) Please check it before connecting the fan, and note that the speed of the 5V fan cannot be adjusted without a controller.
PIEZO Vibration Sensor
Features
- Flexible PVDF Piezo Polymer Film.
- Wide dynamic range.
- Laminated for higher voltage output.
- 0.1″ breadboard friendly leads.
PIR Sensor
Features
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
Pixy2 CMUcam5 Smart Vision Sensor – Object Tracking Camera for Arduino, Raspberry Pi, BeagleBone Black
Features:-
- Pixy2 detects lines, intersections and small barcodes, intended for line-following robots.
- Improved framerate – 60 frames-per-second.
- Tracking algorithms have been added to colour-based object detection.
- Improved and simplified libraries for Arduino, Raspberry Pi and other controllers
- Integrated light source.
- The small, fast, easy-to-use, low-cost, readily-available vision system
- Learns to detect objects that you teach it
- Connects to Arduino with the included cable. Also works with Raspberry Pi, BeagleBone and similar controllers.
- Supports C/C++ and Python
- Communicates via one of several interfaces: SPI, I2C, UART, USB or analogue/digital output.
- Configuration utility runs on Windows, macOS, and Linux.
- All software/firmware is open-source GNU-licensed.
- Dimensions: 43mm x 39mm x 16mm
- Height of Camera: 4mm / 0.16″”
PL2303 USB TO TTL Convertor
Features
- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
- so that the board won’t be burnt down by material shortcut.
- Electrostatic package ensures the board will not be damaged before use
Planetary 10 rpm
Features
- Rated Torque (kgcm): 23
- Stall Torque(kgcm): 90
- Rated Voltage: 12 V
- Rated current: 1.2 A
- Stall Current: 14 A
- Weight: 975 gm
Planetary 100 rpm
Features
- Output RPM: 100 rpm
- Stall Torque: 2.5 Kg/cm
- Stall Current: 750 – 800 ma
- Motor body Length: 75mm
- Motor Body Diameter:35mm
- Material: Cast Iron
- Shaft diameter: 6mm
- Working Voltage: 12V
Planetary 350 rpm
Features
- RPM:350
- Rated Voltage: 12 V DC
- No Load Current: 600 mA
- Full Load Current:14A
- Stall Torque :28 kg-cm
- Number of Gear Trains: 2
- Base Motor RPM:5000
- Brushed permanent magnet DC motor
- Variable speed and reversible
- Planetary Gear Box
Planetary 45 rpm
Features
- RPM – 45
- Rated Voltage – 12 V DC
- No Load Current – 600 mA
- Full Load Current – 14A
- Stall Torque – 90 kgcm
- Number of Gear Trains – 3
- Base Motor RPM – 5000
Planetary Gear DC Motor with Encoder 12V 11 RPM 10 N-m Torque – TPG36555123000-264KE
Features:-
- • Model: TPG36555123000-264KE
• Motor Type: DC Carbon Brush Motor.
• Gear Ratio: 264: 1.
• Operating Voltage: 12. V DC
• Rated Current: 0.800.A
• Rated Base Motor: 3000.RPM
• Rated Speed: 11 RPM
• Rated Torque: 10 N-m
• Operating Temperature: -40 °C ～ +100°C.
• Opt. Relative Humidity: 20% ～ 85% RH
• Gear Material: Powder Metallurgy, Steel, POM.
• Housing Material: Metal.
• Motor Body Size (Diameter): 36. mm
• Motor Length: 11.5mm
Planetary Gear DC Motor with Encoder 12V 115 RPM 2.5 N-m Torque – TPG28395126000-52KE
Features:-
- Model: TPG28M395-52K.
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 52: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.750.A
- Rated Speed: 115 RPM
- Rated Torque: 2.5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 285 RPM 1.2 N-m Torque – TPG28395126000-21KE
Features:-
- Model: TPG28395126000-21KE
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 21: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.750.A
- Rated Base Motor: RPM
- Rated Speed: 285 RPM
- Rated Torque: 2 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 315 RPM 2.5 N-m Torque – TPG36555126000-19KE
Features:-
- Model: TPG36555126000-19KE
- Motor Type: DC Carbon Brush Motor.
- Operating Voltage: 12. V DC
- Rated Current: 0.800.A
- Rated Base Motor: RPM
- Rated Speed: 315 RPM
- Rated Torque: 5N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 435 RPM 2 N-m Torque – TPG36555126000-13.7KE
Features:-
- Model: TPG36555126000-13.7KE .
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 13.7: 1.
- Operating Voltage: 12. V DC
- Rated Current: 0.800.A
- Rated Base Motor: RPM
- Rated Speed: 435 RPM
- Rated Torque: 2N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 500 RPM 0.5 N-m Torque – TPG28395126000-12KE
Features:-
- Model: TPG28M395-12K.
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 12: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.750.A
- Rated Base Motor: RPM
- Rated Speed: 500 RPM
- Rated Torque: 5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 85 RPM 8.5 N-m Torque – TPG36555126000-71KE
Features:-
- Model: TPG36555126000-71KE
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 71 : 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.800.A
- Rated Base Motor: RPM
- Rated Speed: 85 RPM
- Rated Torque: 5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal.
Planetary Gear DC Motor with Encoder 12V 9 RPM 7.5 N-m Torque – TPG28395123000-334KE
Features:-
- Model: TPG28M395-334K.
- Motor Type: DC Carbon Brush Motor.
- Gear Ratio: 334: 1.
- Operating Voltage: 12.V DC
- Rated Current: 0.250.A
- Rated Base Motor: RPM
- Rated Speed: 9. RPM
- Rated Torque: 5 N-m
- Operating Temperature: -40 °C ～ +100°C.
- Relative Humidity: 20% ～ 85% RH
- Gear Material: Powder Metallurgy, Steel, POM.
- Housing Material: Metal..