1045 propeller
Features
- Length: 10″.
- Pitch: 4.5″.
- Weight: 22 gm. (Each pair)
- Shaft Diameter: 9 mm.
- Total Length: 10 inch / 250 mm.
- Material: ABS
XT60 Connector
Features
- Manufacturer: AMASS
- Type of connector: DC supply
- Connector series: XT60H
- Kind of connector: Female
- Number of pins: 2
CC3D flight Control
Features
- Model: CC3D EVO
- Input Voltage:5 V
- Sensors: Micro-Controller STM32, MPU6000
MR.RC 12A ESC
Features
- LiPo Battery Input: 1 – 3S.
- Continuous Current: 12A.
- Burst Current(10S): 15A.
- BEC Mode: Linear.
- BEC Output: 1A/5V.
MARSPOWER MX1806 2280KV BLDC Motor
Features
- VK: 2280
- Max thrust: 460g
- No of cells: 2-3S
- Framework: 12N14P
- Suitable Propeller: 5-6”
- Shaft: 2mm
- Minimum ESC Specification: 12A Suggested
- Durable with high quality
- The 0.2mm core to lower load temperature and increase efficiency
- Range of use for DJI F330 ZMR250 H250
- Do every single motor balancing test
- Japan NMB bearings provide low noise and long life
- 2mm spindle selection of Kawasaki, Japan, more efficient, less heat
LIPO Voltage Battery Tester
Features
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
KK Mini
Features
- IC: Atmega644 PA
- Gyro/Accelerometer: Auto-level: Yes
- Input Voltage: 4.8-6.0V
- AVR interface: standard 6 pins.
- The signal from Receiver: 1520us (5 channels)
- Signal to ESC: 1520us
- LCD size: 24*18mm
- Mini buttons size: Four 3.3*4.2mm
- Mounting holes: 30.5×30.5mm
- Voltage sensor: One red positive pin header for.
- Input rail: Single row 2.54mm pitch pin header for input signal
- Firmware Version: 1.6
- Dimension: 36x36x11.5mm
IMAX B3 Charger
Features
- Input Voltage(AC): 100- 240v
- Battery Type: LiPo (Lithium Polymer)
- Balance Charge Current: 840mA
- Output Current: 3 x 800mA
- Power Plug: EU Plug or US Plug
- Dimensions: 92*59*35.5mm
- Case Material: ABS
KK2.1.5 Flight Control
Features
- IC: Atmega644 PA
- Gyro/Acc: 6050MPU
- Input Voltage: 4.8V~6.0V
- AVR Interface: Standard 6 Pin
- Signal From Receiver: 1520us(5 channels)
- Signal to ESC: 1520 us
Flysky FS-16 6 Channel
Features
- Bandwidth (KHz): 500.
- RF Range (GHz): 2.40 ~ 2.48.
- No. of channels: 6.
- Remote controller weight (gm): 400.
- Power: 6V (1.5V AA*4).
- Antenna Length: 26mm * 2 (dual antenna).
- Transmitting Power: ≤ 20dBm.
- RF Receiver Sensitivity: -105dbm.
Flysky CT6B 6 Channel
Features
- Model Type: Digital Radio Transceiver.
- Sensitivity: 1024.
- Bandwidth: 500 kHz.
- Default Operating Mode: Mode 2 (Left-Hand Throttle).
- No. of Channels: 6.
- Operating Voltage: 12V DC (1.5AA x 8 Battery).
Flysky (only receiver)
Features
- No. of Channel: 6
- RF power: less than 20DBm
- modulation: GFSK
- Code type: PCM
- Sensitivity: 1024
- Low voltage warning: LED
Flysky FS-TH9X 9Channel With FS-R8B
Features
- Transmitter: FS-TH9X Upgrade with FS-RM002 2.4GHz Module
- Receiver: FS-R9B(8 Channel)
- Communication range(Drone to Remote):700m(in open space)
- Default Mode: Mode-2
- Input Power: 12V DC (1.5V x 8 AAA Battery)
- Bidirectional System
- Frequencies-Hopping
- Omni-directional High Gain Antenna
- Low Power Consumption
F550 Frame
Features
- Model: F550
- Frame Weight: 620gm(including landing gear)
- Moter Mounting Hole Diameter: 3 mm
- Landing Gear Material: ABS
- Arm Size: 220 x 55 mm
- Landing Gear Length: 200mm
- Takeoff weight: 1200-2400 grams
DYS Motor D2826 1800KV
Features
| Voltage Rating (V DC) | 7.4 – 11.1 |
| Motor KV (RPM/V) | 1800 |
| LiPo Batteries | 2S-3S |
| Shaft Diameter x Length (mm) | 3.175x37mm |
| Maximum Pull | 820g |
| Max Power | 300 Watt |
| Suitable ESC | 30A |
| Length (mm) | 28 |
| Width (mm) | 22 |
| Weight (gm) | 50 |
DYS Motor D2826 1400KV
Features
- Model: D2826-10
- Voltage: 7.2v~11.1v / 2~3s Lipo
- Kv: 1400 rpm/v
- Shaft Diameter: 3mm
- Shaft Length: 10mm
- Max Watts: 205W
- ESC: 40A
- Screw Size: M3
DYS Motor D2826 1100KV
Features
- Model: D2826-6
- Voltage: 7.2v~11.1v / 2~3s Lipo
- Kv: 2200 rpm/v
- Shaft Diameter: 3mm
- Shaft Length: 10mm
- Max Watts: 342W
- ESC: 40A
- Screw Size: M3
SimonK 30A 2-3S Brushless ESC For RC Model (High Quality)
Features
- MODEL: STANDARD 30A BLDC ESC ELECTRONIC SPEED CONTROLLER
- WEIGHT: 23g
- DIMENSIONS: 45 x 24 x 9 mm(LxWxH)
- Color: Yellow/Red(Depends on Availability)
- CURRENT (A): 30A
- BEC: 3A
- Li-Poly: 2-3
- Ni-Mh/Ni-CD: 4-10 Ni-Mh
- CONSTANT CURRENT: 30A Max 40A<10s
- Li-Poly 2-3 CELLS; Ni-MH 4-10 CELLS Auto Detect
- Break On/Off
Ardupilot Mega APM 2.8 Flight Controller
Features
- Model: APM 2.8
- Input Voltage (V): 12-16 V.
- Processor: ATMEGA2560 and ATMEGA32U-2
- Dimensions (mm) LxWxH: 70 x 45 x 15
AfroFlight Naze32 Rev6 Flight Controller Board For Multicopterr Drone QAV250
Features
• USB on right side
• PPM/PWM input as through-hole
• Flexible motor outputs, support various airframe types:
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
• Up to 8 ch RC input – supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
• Built in FrSky telemetry inverter
• Battery voltage monitoring
• Modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
• 3.3V, I2C on standard-size headers
• SBUS Inverter built in
• Spectrum satellite
A2212 China Motor 2200KV
Features
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
A2212 China Motor 1400KV
Features
- Model: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
A2212 China Motor 1000KV
Features
- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
Simonk ESC 30A
Features
- Model: SIMONK 30A.
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S LiPo.
3.17mm RC Aluminum Bullet Propeller Adapter Holder For Brushless Motor Prop
Features
- Bore Diameter: 3.7mm(expandable up to 4.1mm).
- Material: Aluminum.
- Color: Silver.
- Ease of interfacing.
- Rust-free and stain-free aluminum metal construction.
- It is used to capture propeller with BLDC motor in quad-copter/multi-rotor/drone.
Bullet Connector 3.5MM
Features
- Material: Brass
- Plating: Gold
- Size: 3.5mm
- Current Rating: 30A
Dean Connector
Features
- Material: plastic and metal (gold plated)
- Improved Locking.
- Gold Plated Connectors tip.
- Color: Red.
- High-Quality built and Material.
- Good resistance to Temperature & High Amp. Current.
iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER
Features
- Input Voltage: 11~18v
- Circuit Power: Max Charge 50W – Max Discharge 5W
- Charge Current Range: 0.1~5.0A
- Discharge Current Range: 0.1~1.0A
- NiMH/NiCd Cells: 1~15
- LiIon/LiPoly Cells: 1~6
- Pb Battery Voltage: 2~20v
- Weight: 277g
- Dimensions: 133x87x33mm
IMAX B6-AC Lipo NiMH Battery Charger/Discharger 1-6 Cells
Features
- AC 100~240v or 12V DC input
- The cables come with a fitted fuse.
- Microprocessor controlled
- Li-ion, LiPo, and LiFe capable
- Input voltage monitoring. (Protects car batteries at the field)
- Battery break-in and cycling feature
- Data storage (Store up to 5 packs in memory)
- Internal resistance checker to see pack health
- Delta-peak sensitivity
- Individual cell balancing
Smart Robot Car Chassis Kit 2 Wheels
Features
- Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY.
- This car is the tachometer encoder.
- With a 4 AA battery box (batteries not included).
- Can be used for distance measurement, velocity.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- wireless remote control.
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
NEMA17 Stepper L Clamp
Features
- Motor Type: NEMA17
- Material: Mild Steel(MS).
- Dimensions: 50x48x44 (LxWxH) mm
- Mounting Holes Size: 4mm
- Weight: 73 gm.
Mitsumi R-14 A341 370 DC pump 6V 200mA Oxygen Pump Tank Motor
Features
- High-Quality Pump
- Operating Voltage 6VDC
- Low Noise Operation
- Durable and Longer Lasting
MB 102 840 Points
Features
- Compatible with MB-102 breadboard power supply module
- Quick circuit testing and mock-up
- 840 Contact Points
- Suitable for most IC’s, Standard 0.1′ Spacing
- Positive and Negative Power Rails on Top and Bottom
- 100% brand new and high quality
- Solderless breadboard
- Completely reusable and have a self-adhesive back
- Easy component placement
- Weight: 200 g
- Dimensions: 165 × 55 × 10 cm
Male to Male jumper wire
Features
- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
Male to Female Jumper Wires
Features
- Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers
- weight: 0.2 gms
- Good quality Product
- Country of Origin: India
HK-300 (2.5W) submersible mini water pump AC 220V-240V
Features
- Rated Voltage : AC 220V-240V
- Power:2.5W
- Pumping head : 0.5 m(1.64Ft)
- Pump Size: 90 * 40 * 35mm
- Fluid: 0-100 ° C
- Life: up to 10000 Hours
- Maximum flow rate of up to 180L/H(47.55G/H)
- Efficiency: 90%
- Operation temperature: ≤69degC