FMS 1:18 FCX18 Hummer EV Pickup Truck RTR
GENERAL MOTORS LLC LICENSED PRODUCT
●ULTRA REALISTIC DETAILS
●FCX18 CRAWLER CHASSIS
●POWER CONFIGURATION INCLUDES 3-IN-1 RECEIVER/ESC/LIGHT CONTROL, 180 BRUSHED MOTOR, AND 7.4V 900MAH BATTERY
●FULL METAL STEERING ROD & LINKAGE
●TWO-SPEED TRANSMISSION
●COIL SPRINGS + OIL FILLED METAL SHOCKS
●HEADLIGHTS, TURN SIGNALS, AND TAILLIGHTS
FMS 1:24 FCX24M Land Rover Camel Trophy Edition RTR (Defender 110)
Licensed By Jaguar Land Rover Limited
– New Generation FCX24M Chassis
– C-Channel Metal Chassis Rails
– ABS Hard Body
– Two-Speed Transmission, Enabling Off-Roading And Crawling
– Large-Diameter Tires Provide Sufficient Ground Clearance
– Factory-Installed Roof Rack
FMS 1:24 FCX24M Range Rover F.G. Camel Trophy Edition RTR
Licensed By Jaguar Land Rover Limited
– New Generation FCX24M Chassis
– C-Channel Metal Chassis Rails
– ABS Hard Body
– Two-Speed Transmission, Enabling Off-Roading And Crawling
– Large-Diameter Tires Provide Sufficient Ground Clearance
– Factory-Installed Roof Rack
UDI RC 0005 – Arrow RC Boat 50kmph
UDI005 Brushless Muscleboat!
50km/h on 3s LiPo all-out! ARROW means business with its super-rigid, 25-inch deep-V hull, smooth, cable-drive efficiency, innovative water cooling system, and precision drive controls. The clean, modern hull design is built up in layers for maximum rigidity and its bold color makes a statement on the water.
Racing Rally 1:10 4WD Off Road Crawler RC Car Range Rover First Generation
This 1/10 affordable highly detailed and capable 4WD Defender will surprise any RC enthusiast! It can conquer almost any terrain just like the high end 4×4 Crawlers!
Volantex RC Phoenix 2400 6 channel Glider with 2400 mm wings 759-3 PNP
Volantex RC Phoenix 2400 6-CH Glider with 2400 mm wings 759-3 PNP
Glider in the PNP version, the set includes the model, engine, regulator and servos. You need to buy a battery, charger, transmitter and receiver on your own.
Key Features:
– The 2.4M wingspan provides stable performance and makes you enjoy long glider flights. – A rugged plastic hull provides flexibility and durability to prevent aircraft damage.
– The model has been equipped with a wheel to facilitate landing.
– Engine size 4023 / 1050KV
– Model 6 CH version
MJX Hyper Go 14303 – High-Speed 1/14 Scale 2.4GHz Brushless 4WD RC Car
This item: MJX Hyper Go 14303 – High-Speed 1/14 Scale 2.4GHz Brushless 4WD RC Car
Standard version(with 1 battery)
6x6x6mm Tactile 4 Pin Push Button Switch – 5 Pieces Pack (Copy)
6x6x6mm Tactile 4 Pin Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but can also be used on a solderless breadboard for temporary connections in prototypes. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed and complete the circuit.
This tactile switch also offers reliable dome contact technology and strong tactile feedback, with multiple operating forces to choose from. Applications include telecommunications, consumer electronics, audio/visual, medical devices, testing/instrumentation, and computer/peripherals.
They come in a pack of 5, as they’re pretty handy so you’ll want to keep them around.
12x12x6mm Tactile 4 Pin Push Button Switch – 5 Pieces Pack
12x12x6mm Tactile 4 Pin Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but can also be used on a solderless breadboard for temporary connections in prototypes. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed and complete the circuit.
This tactile switch also offers reliable dome contact technology and strong tactile feedback, with multiple operating forces to choose from. Applications include telecommunications, consumer electronics, audio/visual, medical devices, testing/instrumentation, and computer/peripherals.
They come in a pack of 5, as they’re pretty handy so you’ll want to keep them around.
DPDT Rocker Momentary Switch-2pcs
Flush mounting DPDT rocker switch
Double pole double throw
For Linear Actuators and other DC Motors
Type: 3 positions Momentary switch
9v Battery for Robotics Projects
QUICK OVERVIEW
Constant 9V Output till lasts
Metal Jacket Body
Good Built Quality and hence Leakproof
Easy to install and Replace
Corrosion free Connector Point for long-term use
0% Mercury and Cadmium. Environment-friendly
OEM Compatible.
Mjx M163 Offroad
Introducing the MJX MEW4 M163 monster trucks. Praised by countless RC enthusiasts on YouTube (check for yourself!), the M163 models offer exceptional reliability and high-speed performance all packed into a highly portable 1/16th size model. Each vehicle features quality components using 2.4ghz radio equipment to eliminate interference and powerful LiPo batteries to provide a thrilling RC experience.
Like all MJX models, the M163 truck features fully serviceable and user-configurable parts including adjustable independent suspension, multiple shock absorber positions, adjustable camber and adjustable chassis clearance. Most parts can be upgraded including the chassis strengthened with alloy parts.
WL Toys K969 Drift Rc Cars
WLtoys K969 High Speed RC Racing Car
The 4WD and amazing speed of 30km/h will catch your attention. The racing car is super fast, responsive, full function, and remote-controlled. You can freely control the speed and direction, and perform U-shape drifts with ease. Also features steering (go forward and backward, turn left and right). It is delicately manufactured, which is the standard of all hobby class vehicles.
MJX 14210 V3 1/14 Hyper Go 4WD RTR
Features:
1. Metal hydraulic shock absorber;
2. Standard 2S battery 55km/h
3. 45A independent brushless ESC with cooling fan
4. 2852 4400kv four-pole brushless motor;
5. Chrome steel gear differential, chrome steel + powder metallurgy gear, metal chassis
6. All-metal transmission system (steel metal gear differential);
FMS RC Car 1/12 Scale Suzuki Jimny 4WD Crawler RTR
FMS RC Car provides an amazing appearance design and an outstanding car light system that can be activated remotely. It is built with precision and conveniently located parts
DumboRC X6 2.4GHz 6CH Radio Transmitter with X6F RC Receiver
The X6 is an affordable easy to use Transmitter for cars and boats. With 6 channels if can handle just about any model setup with extra auxiliary accessories. The included X6FG 6ch receiver has a built in Gyro perfect for Drift or any applications where steering stabilisation is needed.
MJX 1/14 Hyper Go 14209 4WD RTR
This item: MJX 1/14 Hyper Go 14209 4WD RTR 43KM/H 2.4GHZ Brushless High Speed RC Car$159.00
New Upgraded 3S Battery 11.1V 25C 2000mAh L I-PO Battery with T Plug for MJX 16208 16209 14209 14210 RC Car$31.90
MJX 2S 7.4V 25c 3000mAh L I-PO Battery with T-plug for MJX 16208 16209 14209 14210 RC Car$31.90
MJX 14210 1/14 Hyper Go 4WD RTR 55KM/H 2.4GHZ Brushless High Speed RC Car Vechile$158.00
MJX 1/14 Hyper Go 14209 4WD RTR 43KM/H 2.4GHZ Brushless High Speed RC Car Vechile Models
Hyper Go MJX 16209 RC Truck
Packing list: Buggy*1, Remote control*1, battery*1; rear wing*1; Manual*1; USB charging cable*1; Hexagon wrench*1; Head-up wheel accessories*1; Screwdriver*1
Configure: Motor Specifications: 2845 4200KV Brushless Motor, Motor cool-ing aluminum heat sink + cool-ing fan, ESC 45A brushless ESC (metal heat sink), Servo specification 17g digital servo, Remote control 2.4G, Remote control battery AA*2, Battery Specifications 7.4V 1050mAh 25C
Features:1. All-metal hydraulic Sho-ck absorber; 2. Standard 1050mah battery and reach a maximum speed of 45km/h; 3. 45A independent brushless ESC + 2845 four-pole brushless motor; 4. All-metal transmission system (metal gear differential); 5. Standard independent receiver, easy to modify. ” 6. Bluetooth Two-way transmission GPS Upgrade Kit (HG-T22) (Optional Upgraded Parts, Not included)
Basic parameters : Product model: 16208/16209/16210, Scale 1/16, Maximum speed 45km/h, Remote control distance 60-80m, Maximum use time 10min, Charging time 2h (using 5V 2A charger), Charging method USB charging cable
Dimensions and Specifications: Product size (mm) 310x222x110, Wheelbase (mm) 174mm, Wheel base (mm) 182mm, Tire diameter (mm) 83mm, Vehicle weight 1030g
Hyper Go MJX 16208 RC Truck
About this item
1. All-metal hydraulic shock absorber;
2. Support 3S battery (The original car comes with one 2S battery. 3S battery is not included);
3. 45A brushless ESC + 2845 four-pole brushless motor;
4. All-metal transmission system (metal gear differential);
5. Standard independent receiver, easy to modify.
Orange Glitter PLA+ 1.75mm 3D Printing Filament 1kg
Consistently High Quality
10 times stronger than regular PLA on the market
Deliver exceptional performance
Made from great, high-performance materials
Ready to print on any open source desktop or industrial printer
Orange PLA+ 1.75mm 3D Printing Filament 1kg
Consistently High Quality
10 times stronger than regular PLA on the market
Deliver exceptional performance
Made from great, high-performance materials
Ready to print on any open source desktop or industrial printer
Orange ePLA – 1.75mm 3D Printing Filament 1kg
Good flow properties
Diameter tolerances of ± 0.1mm checked with laser monitor
Smooth surface with even rounding
Lower melting temperature
Compatible with almost all 1.75mm FDM printers
Easy to use
Orange PETG 1.75mm 3D Printing Filament 1kg
Higher-strength, lower shrinkage, and smoother finish than ABS & PLA
Combines good strength with ductility, making it a good, tough material for mechanical parts
Good chemical resistance
Often features a nice, translucent finish
Contains UV absorber
Good hydrophobicity (doesn’t absorb water easily), good for high humidity storage & usage
Orange ABS+ 1.75mm 3D Printing Filament 1kg
Material: The filament is made of Acrylonitrile Butadiene Styrene (ABS+), which is a common thermoplastic polymer used in a wide range of applications.
Diameter: The filament has a diameter of 1.75mm, which is a common size for 3D printing filaments.
Weight: The filament comes in a 1kg spool, which is a standard weight for 3D printing filaments.
Orange eABS – 1.75mm 3D Printing Filament 1kg
The appearance is White, non-transparent.
Non-toxic, tough, hard texture, with good temperature tolerance and creep resistance.
Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.
Orange ABS+ 1.75mm 3D Printing Filament 1kg
High Durability
Flexible
Higher Temperature Resistance
Prints smoother & smoother printed objects
Tougher and stronger
Less warping (about 0.4% compared to over 8% in regular ABS)
eSun ABS+ 1.75mm 3D Printing Filament 1kg
Tougher and stronger
Less warping (about 0.4% compared to over 8% in regular ABS)
Prints smoother & smoother printed objects
Better scratch, heat and oil resistance
Can be polished using acetone
Can be easily colored.
eSun eABS Max 1.75mm 3D Printing Filament 1Kg – Black
The appearance is black, nontransparent.
Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant.
Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.
Allow acetone polishing for appearance.
Landing Gear Wheel Stop Set Collar 6×2.1mm 4 Sets
Landing Gear Wheel Stop Set Collar 6×2.1mm 4 Sets
Swappable Power Pod Kit
Swappable Power Pod Kit with Landing gear and wheels
FT-Explorer Replacement Nose Canopy
Replacement / Spare Nose Canopy Kit for FT-Explorer
FT-Explorer Power Pod Kit
Replacement / Spare Power POd kit for FT-Explorer
Pushrod Linkage Connector
Pushrod linkage connector ( 4 Sets )
Diameter of Hole : 1.3mm
4 pcs/pack
Pushrod (4 Pcs) For Linkage Connector
Pushrod ( 4 Pcs ) 50CM Each.
Thickness – 1.3mm
Length – 50cm (each)