Home Shop Page 19
Showing 649–684 of 1014 results
Features:-
Throttle Type: With LCD Display
Material: ABS/PMMA
Waterproof Lever: IP54
Voltage: 36V
Features
Model: D2826-6
Voltage: 7.2v~11.1v / 2~3s Lipo
Kv: 2200 rpm/v
Shaft Diameter: 3mm
Shaft Length: 10mm
Max Watts: 342W
ESC: 40A
Screw Size: M3
Features
For beginners who are interested in Arduino
A complete set of Arduino’s most common and useful electronic components
Infrared sensor receiving module
Laser sensor module
Temperature and humidity sensor module
Infrared sensor module
5v relay module
Obstacle avoidance sensor module.
Features
Good Quality Water Flow Sensor
Operating Voltage: 12VDC
Flow Range: 2-100L/Min
Suitable for Water Pressure Below 1.75MPa
Tougher and stronger
Less warping (about 0.4% compared to over 8% in regular ABS)
Prints smoother & smoother printed objects
Better scratch, heat and oil resistance
Can be polished using acetone
Can be easily colored.
Consistently High Quality
10 times stronger than regular PLA on the market
Deliver exceptional performance
Made from great, high-performance materials
Ready to print on any open source desktop or industrial printer
Features:
The degree of Freedom (DOF): 2
Paw material: aluminum alloy
Paw weight: about 68g (without motor)
Claws overall length: 108mm (overall maximum length when closed paw)
Claws overall width: 98mm (maximum overall width of the paw when open)
Paw maximum opening angle: 55mm.
Features
No. of Channel: 6
RF power: less than 20DBm
modulation: GFSK
Code type: PCM
Sensitivity: 1024
Low voltage warning: LED
Features
Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
Stackable Design, can directly be supported by for Arduino official Ethernet Library.
Supports up to four simultaneous socket connections
Can be used to store files for serving over the network.
Compatible with the for Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560)
Features:
Protocol: ZigBee
Modulation: DSSS
Frequency: 2.4GHz
Data Rate: 1Mbps
Power: Output 18dBm
Sensitivity: 101dBm
Serial Interfaces: SPI, UART
Antenna Type: Antenna Not Included, U.FL
Transceiver chipset: Silicon Labs EM357 SoC
Operating voltage: 2.7V-3.6V
Current Receiving: 31mA ~ 45mA.
Features
RPM – 45
Rated Voltage – 12 V DC
No Load Current – 600 mA
Full Load Current – 14A
Stall Torque – 90 kgcm
Number of Gear Trains – 3
Base Motor RPM – 5000
Features:
Operating Voltage: 3-6V VDC
Gear Ratio: 1:48
No-load speed(5V): about 200 RPM
Rated Torque: 0.8 Kg.cm @ 5V
Load current: 170mA (when it is 4.5V)
Shaft Length: 10 mm
Shaft Type: 6 mm, Double-D
Loading Capacity: Max 2.5Kg
Wheel Diameter: 65 mm
Wheel Width: 27 mm
Body Material: Plastic
Grip Material: Rubber.
Features:-
supports CSD, USSD, SMS, FAX
Supports MIC and Audio Input
Speaker Input
Features keypad interface
Features display interface
Features Real-Time Clock
Supports UART interface
Supports a single SIM card
Firmware upgrade by debug port
Communication by using AT commands.
Features:-
Accelerometer, Gyroscope, and Magnetometer
Power Supply: DC3.3V-5V
Chip: MPU9250
Size: 22 mm x 17 mm.
Gyro range : ± 250 500 1000 2000 ° / s
Acceleration range: ± 2 ± 4 ± 8 ± 16g
Magnetic field range: ± 4800uT
9 DOF modules.
Features
LCD Type: TFT.
Touch Screen Type: Resistive Screen.
Backlight: Yes, LED.
Resolution (Pixel): 320 x 480.
Aspect Ratio: 8:5.
Touch Controller: XPT2046.
Features:
Drive voltage: DC 5-l2V
Work current: ≤ 1.2A
Speed range: from 0% to 100%
Phase inversion Control: Yes
Voltage polarity protection: Yes.
Features
Maximum Speed(RPM)
300 (at 12V)
Rated Voltage
12V
Nominal Voltage
12V
Stall Torque(Kg-Cm)
14 kgcm
No Load Current
700 mA
Rated Load Current
4 A
Stall Current
14 A
Weight (gm)
500 gram
Features
Rated Voltage – 12v
RPM – 600 (at 12v)
Nominal Voltage – 12v
No- Load Current – 700 mA
Load Current – 4 A
Stall Current – 14 A
Full (Stall) Load Torque – 14 kgcm
Weight – 500g Approx
Features:
2.4GHz 802.11b/g/n,compatible
Support IEEE 802.3、IEEE 802.3u
WiFi Client/AP/Router Mode
Support WPS/WDS
The range of baudrate: 1200~500000bps.
Features
Colour: Black
Detecting frequency: 100 – 2600mhz
Effective range: 1-10m (32 – 32ft)
Detect the harmful electromagnetic radiation
Detect if there is more secret 5. 8 Ghz wireless web camera, wireless wiretap, and wire monitor.
Ensure the privacy of your phone conversations up to a great extent
Prevents eavesdropping, videotaping, fraud, protect personal privacy data and information confidential
Dimensions:6*5*5cm
Weight: 400gm.
Features
Distance measuring range: 100 cm to 550 cm
Output type: Analog voltage
Output voltage differential over distance range: 2.05 V (typical)
Update period: 38 ± 10 ms
Features
VK: 2280
Max thrust: 460g
No of cells: 2-3S
Framework: 12N14P
Suitable Propeller: 5-6”
Shaft: 2mm
Minimum ESC Specification: 12A Suggested
Durable with high quality
The 0.2mm core to lower load temperature and increase efficiency
Range of use for DJI F330 ZMR250 H250
Do every single motor balancing test
Japan NMB bearings provide low noise and long life
2mm spindle selection of Kawasaki, Japan, more efficient, less heat
Features
Step Angle ( ° ): 1.8
Motor Length (L)mm: 51
Current/Phase A: 1
No of Leads: No. 6
Shaft type: Round.
Features:
ATmega328P with Arduino bootloader
MAX7456 monochrome on-screen display
FTDI cable compatible pinout
Standard 6 pin ISP header
2 independent power sections with an LED indicator on each
Solder jumpers for combining the power sections.
Features:
1. 3-DOF manipulator! Vertical arm up and down, back and forth.
2. U-type robot waist bracket on the arm can be mounted directly on the base in the car or any other desktop platform.
3. The vehicle type 3-DOF manipulator medium length, back and forth up and down, in which a mechanical claw opening and closing of the steering gear control, two servo control arm up and down back and forth.
4. This robot is particularly suitable as a vehicle manipulator robot car, grab the ball, catch the car are particularly good, very suitable for their own DIY or robotic smart car racing.
5. Activities can use 180 degree steering joints.
Features:-
RPM: 30.
Torque: 68 kgcm.
Voltage: 12-240 VAC.
Input Power: <13W.
Frequency: 50/60Hz.
Rated Current: 100mA.
Noise (dB): 42.
Insulation Class: B.
DJI Mavic Mini Lower Body Shell
A DJI PRODUCT
Lower Frame Shell for DJI Mavic Mini.
High quality, 100% original and new.
Package included: 1 X Lower Frame Shell for Mavic Mini
Features:-
Adopts two high-quality TPA3116D2 digital amplifier chips.
Sound quality is very good, high efficiency and amplifying power.
50W x 2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
Powered by DC 12-24V, wide input voltage.
User can adjust the volume by themselves easily.
Applicable speaker impedance: 4-8 ohm.
Features
3.2″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
It can control the backlight to connect the transistor to a digital pin
240×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
4-wire resistive touchscreen
8-bit digital interface, plus 4 control lines
Features:
Thickness – 0.203 mm (0.008 in.).
Length – 81.3 mm (3.20 in.)**.
Width – 55.9 mm (2.20 in.).
Sensing Area – 50.8 mm x 50.8 mm (2 in. x 2 in.).
Connector – 2-pin Male Square Pin.
Substrate – Polyester.
Pin Spacing 2.54 mm (0.1 in.).
Standard Force: 222 N.
Temperature Range (Low): -40 °C.
Temperature Range (High): 60 °C.
Thin and flexible.
Features
Version: V4.0
Resistive touch.
Dimension: 3.2 inch.
Operating Voltage: DC 5V.
Driver: XPT2046.
Resolution: 240 x 320.
SCT-013-000 YHDC 100A Switching Type Current Transformer SCT013000
Features
Material: ABS
Colour: White
Voltage Measurement Range: AC 80-300V
Current Measurement Range: AC 0-100.0A
Power supply: < 0.2V*A
Installation: Embedded installation
Accuracy: 1% ± 2digit
Measurement speed: about 2 times per second
Display Type: LCD with blue backlight
Operating Temperature: 10deg. C ~65deg. C
Operating Humidity: 35~85 per cent RH
Current Transformer: included.
Features:-
RPM: 40.
Torque: 5 kgcm.
Voltage: 12-240 VAC.
Input Power: <13W
Max Output Torque: 68kgcm.
Available RPM: 5, 8, 15, 20, 30, 60.
Frequency: 50/60Hz.
Rated Current: 100mA.
Noise (dB): 42.
Insulation Class: B.
Features
Comparably more powerful than NEMA17 motors.
The input pulse decides the rotation angle of the motor.
High accuracy of around 3 to 5% a step.
It provides good starting, stopping, and reversing.
Control of this motor is less costly because of the exclusion of complex control circuitry.
The speed is proportional to the frequency of the input pulses.