Home Shop Page 19
Showing 649–684 of 1014 results
Features
BCD Technology
Latch Switch
2.8~24V Operating Vcc Range
-40~150C Operating Temperature
Magnetic Sensitivity Option: (BOP=20Gs, BRP=-20Gs)
Open-Drain Output
-27V Reversed Power Supply Protection
Output Limiting Current Protection
RoHS Compliant: (EU)2015/863
Features
Operating Voltage: 3.5V-5V
Supply Current: 15mA
Optimal Sensing Distance: 3mm
Designed with the reflected infrared sensor, indicator light.
Built in a potentiometer for sensitivity control.
On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
Signal detection sensitivity can adjust
Reserve all the way more circuits (P3 voltage drawn)
Features
Output Power: 5mW
Working Voltage: 5V DC
Working temperature: -10 ℃~＋40 ℃
Housing material: Copper
Working life: more than 2000 hours
Spot mode: Dot Facula (continuous output)
Laser wavelength: 650nm red-colored.
Operating current: <40mA
Power lead length: 120mm.
Features
Diameter: 3mm
No. of Pins: 2
Type of Mounting: PCB Through Hole
Maximum Operating Temperature: -30 to +70°C (Approx.)
Dark resistance:5 Mohm
Features
Detection distance: 2 ~ 30cm
Detection angle: 35 °
Comparator chip: LM393
3mm screw holes for easy mounting
Features
Supports momentary or latching/toggle modes.
Supports Active High or Active Low output signal modes.
Dimensions : 15mm x 11mm.
Input Voltage : 2 Volt – 5.5 Volts DC.
The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V.
Sensitivity can adjust by the capacitance(0~50pF).
Have two kinds of sampling length by pad option(SLRFTB pin).
Stable touching detection of the human body for replacing traditional direct switch key.
Provides Fast mode and Low Power mode selection by pad option(LPMB pin).
Provides direct mode、toggle mode by pad option(TOG pin).
Open drain mode by bonding option, OPDO pin is open drain output, Q pin is CMOS output.
All output modes can be selected active high or active low by pad option(AHLB pin).
Have the maximum on time 100sec by pad option(MOTB pin).
Have external power-on reset pin(RST pin).
Features
The diameter of the Electrode Pad: 52 mm
Cable Length: 2 feet
Weight: 30gm.
Improved adjustable gain (more rugged)
Onboard port for our new cables
Connects to the board straight out of the box
The reduced voltage needed (+-3.5V)
Features
Brand/Manufacturer
Generic
Country Of Origin
China
Packer / Importer Address
Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka – 560027 India.
MRP
Rs. 55.46 (Inclusive of all Taxes)
Features
Version: V4.0
Resistive touch.
Dimension: 3.2 inch.
Operating Voltage: DC 5V.
Driver: XPT2046.
Resolution: 240 x 320.
Features
DVK512 x 1
USB type A plug to mini-B plug cable x 1
4-pin 2-pin wires pack x 1
RPi screws pack (2pcs) x 1
Features
Fully Compatible with Both the Model A, Model B and Model B+ Raspberry Pi
5MP Omnivision 5647 Camera Module
Still Picture Resolution: 2592 x 1944
Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording
15-pin MIPI Camera Serial Interface – Plugs Directly into the Raspberry Pi Board
Size: 20 x 25 x 9mm
Weight 3g
Features
Optional clip-on lid provides protection but can be removed if using a HAT
All primary ports (including microSD) accessible
Removable side plate allows access to those wonderful GPIO pins
Snug and secure fit protect your Pi while looking great!
Anti-slip feet keep your Raspberry Pi stable
Power and activity lights still visible through the end of the case
Features
Onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance.
Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards.
Onboard headphone jack (extended from USB).
Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission.
Onboard RJ45 Gigabit Ethernet port, 10 / 100 / 1000 M adaptive.
Onboard PoE header, for connecting PoE HATs.
DSI interface is DSI1.
Micro USB port is for power supply and for programming images USB SLAVE.
Please do not connect to other devices when programming the image by micro USB so as to ensure that CM4 can be powered on normally.
When using CM4, you need to provide 5V/4A to CM4. Otherwise, it may power off, lower frequency, etc.
USB 2.0 is close by default, if used dtoverlay=dwc2,dr_mode=host should be added in config.txt.
It only supports 5V fan. (12V is not supported.) Please check it before connecting the fan, and note that the speed of the 5V fan cannot be adjusted without a controller.
Features
This simple case provides tough protection for your raspberry pi along with access to ports
High Quality two-piece injection-molded ABS enclosure
Click together design, no screws, standoffs or elastic bands required
It is easy to use. You just need to click them together after you fix your pi board on it with screws.
4 x Non-slip Silicone Gaskets provided, which can be stuck to the bottom four corners of the box, to prevent it from slipping when placed on a surface.
Features
RGB Backlight Keys
Onboard trackpad with all mouse function
Left+Right click Gaming keys
Operate on inbuilt Rechargeable battery
Navigation, Volume Rockers and Home key
Portable Pocket Size
Plug and Play operation, No drivers needed to install
Compatible with all Devices and operating Systems
Features
Compatible With Raspberry Pi
Module: T Type GPIO Extension Adapter
Dimensions: 72 x 59 x 13 (LxWxH) mm.
Pins: 40
Shape: T-Shape
Features
7-inch LCD display.
1024 x 600 screen resolution and IPS display panel.
170º viewing angle
Toughened glass resistive touch panel.
HDMI interface for displaying, USB interface for touch control.
Supports 5-level backlight adjustment.
Raspberry Pi and Windows device & system support.
Features
Display Size: 5″
Resolution: 800 x 480 pixel
Supply Voltage: 5V @1A
Very easy to assemble with Raspberry Pi.
Features
LCD Type: TFT.
Touch Screen Type: Resistive Screen.
Backlight: Yes, LED.
Resolution (Pixel): 320 x 480.
Aspect Ratio: 8:5.
Touch Controller: XPT2046.
Features
3.2″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
It can control the backlight to connect the transistor to a digital pin
240×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
4-wire resistive touchscreen
8-bit digital interface, plus 4 control lines
Features
RP2040 microcontroller with 2MB of flash memory
On-board single-band 2.4GHz wireless interfaces (802.11n)
Micro USB B port for power and data (and for reprogramming the flash)
40 pin 21mmx51mm ‘DIP’ style 1mm thick PCB
Exposes 26 multi-function 3.3V general purpose I/O (GPIO)
23 GPIO are digital-only, with three also being ADC capable
Features
Display Port: HDMI
Display Panel: IPS
Viewing Angle: 170 degree
Touch Type: Capacitive
Display Resolution: 1024×600.
5-points capacitive touch control.
Features
800×480 hardware resolution.
Resistive touch control.
Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
Using as a computer monitor, it supports Windows 10 / 8.1 / 8 / 7, single touch, no need to install any drivers.
Support backlight control, more power saving.
Features
Fixed focus lens on-board
Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
Supports 1080p30, 720p60 and 640x480p90 video
Size 25mm x 23mm x 9mm
Weight just over 3g
Connects to the Raspberry Pi board via a short ribbon cable (supplied)
Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
Uses the Sony IMX219PQ image sensor – high-speed video imaging and high sensitivity
Features
10.1-inch LCD display.
1200 x 800 screen resolution and IPS display panel.
170º viewing angle
Toughened glass capacitive touch panel, 6H hardness.
HDMI interface for displaying, USB interface for touch control.
Supports 5-level backlight adjustment.
Raspberry Pi and Windows device & system support.
Features
Color: black
Material: ABS Plastic
Length: 200mm
Ground Clearance: 150 mm
Compatibility: Q450 and S500 Frames
Weight: 75 (each landing gear)
Features
Poor man’s Tiger motor
Brand name: Sunnysky
KV: 980KV.
Framework: 12N14P
Operating Current: 6A ~ 18A
Peak Current: 14A
Shaft: 3mm.
thrust: 880g
Stator Diameter: 22mm
Stator Thickness: 12mm
of Stator Slots: 12
Features
Material: glass fiber
Compatible with MK KK flight control installment pitch of holes
Compatible with MK KK flight control system
Can connect 1-8 ESC.
Board Dimensions : 50 x 50 x 2 mm.
Weight: 8 gm.
Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
Features
Wheelbase: 250mm
Material: Full Carbon Fiber
Weight: 160 gm
The arm has multiple motor mounting holes.
Equips vibration-free mounting bracket for FPV camera.
Features
Made by advanced engineering material, super strong & smooth
Easy to assemble and disassemble.
The frame is tough and durable.
The main glass fiber frame has good strength.
The arm equips support ridges for better and faster forward flight.
Features pre-threaded brass sleeves.
In-built power distribution board.
Features
Colour: Black & Red
Wheelbase: 325mm
Frame Diameter: 330mm
Frame Spacing: 30mm
Recommend to use 3S 2200-4000mah Lipo battery
Glass fibre material on centre plates
Glass-filled nylon arms for increased strength and durability
Lightweight arm design
Integrated PDB for easy wiring and tidy installation
Increased internal space for additional electronics/equipment
Additional mounting holes for frame upgrades
Suitable for CC3D\MWC\APM\PIXHAWK\NAZA flight control
Features
Length: 5″.
Pitch: 4.5″.
Weight: 22 gm.
Shaft diameter: 5mm.
Total length: 5 inch / 125 mm.
Material: Glass Fiber Nylon
Features
Length: 8″.
Pitch: 4.5″.
Weight: 20 gm.
Shaft Diameter: 9.5mm.
Total Length: 8 inch / 200 mm.
It comes with a set of plastic reducers (3,3.17,4,5,6,8 mm).
Features
Comes with thin and wide blades
7045(7×4.5) Propellers Black features epoxy resin cover.
It comes with a set of plastic reducers (3, 3.17, 4, 4.70, 5, 6, 6.25 mm).
Quick to release, quick to attach
New design propellers, with greater aerodynamic efficiency, good lifting capacity.
Features
Comes with thin and wide blades
6045(6×4.5) Propellers Black features epoxy resin cover.
It comes with a set of plastic reducers (3, 3.17, 4, 4.70, 5, 6, 6.25 mm).
Quick to release, quick to attach
New design propellers, with greater aerodynamic efficiency, good lifting capacity.
Features
Brand: Orange
Material: Glass Fiber Nylon
Color: Grey
No. of Blades: 2
The Orange HD Propellers 1245(12X4.5) Glass Fiber Nylon Gray comes with Epoxy resin cover.
Very strong and lightweight.
