Mini 3 Pro R-axis Motor with Bracket
For DJI Mini 3 Pro
Mini 3A DC-DC Converter Step Down Module
Features
| IC Chip | MP1584EN |
| Input Voltage (V) | 4.5 to 28 |
| Output Voltage(V) | 0.8 to 20 |
| Output Current(A) | 3 |
| Typical Output Voltage(A) | 1.8 |
| Typical Switching Frequency(MHz) | 1 |
| Maximum Switching Frequency(MHz) | 1.5 |
| Conversion Efficiency(%) | 96 |
| Output Ripple(mV) | <30 |
Mini Breadboard 170 Points
Features
- Tie-points: 170 (10×17)
- Size: 48 x 35 x 10 mm(LxWxH).
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Phosphor bronze nickel plated spring clips
- Accepts a variety of wire sizes (29-20 the AWG)
Mini data logger module logging shield for raspberry pi/arduino
Features:
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
Mini DC 5A motor PWM speed controller 3-35V speed control switch LED dimmer
Features:
- Mini DC 4.5-35V 5A PWM Motor Speed Controller.
- Wide voltage DC motor speed controller.
- Operating voltage: DC4.5V-35V
- Output current: 0-5A
- Output power: 90W (max)
- PWM duty cycle: 1% -100%.
Mini DC 5A Motor PWM Speed Controller 3-35V Speed Control Switch LED Dimmer
Features:
- Operating voltage: DC 3V-35V.
- Output current: 0-5A
- PWM Motor Speed Controller.
- Control power: Maximum 90W.
- Quiescent current: 0.01A (Standby).
- Material: plastic, metal.
- PWM duty cycle: 1%-100%.
- PWM frequency: 10 kHz.
Mini Electric Drill Chuck 0.3-4mm Jto Taper-Mounted Lathe PCB Drill Press for Motor Shaft Connecting Rod 3.17mm
Features:-
- Color: as picture.
- Material: High Carbon Steel.
- outside diameter: 21.5mm.
- Taper: 2 degrees 49 minutes 24.7 seconds.
- work with 0.3mm-4mm (0.01 “”-0.16″”) Drilling Rigs.
- the maximum tightening: 4.2mm.
- Connection size: JT0 (inner hole diameter is 6mm).
- JT0 larger diameter final cone: 6.350mm.
- JT0 cone Smallest diameter end: 5,800mm.
- 3.17mm Brass Mini Electric Motor Shaft.
Mini ESP-M2 ESP8285 Serial Wireless WiFi Transmission Module SerialNET MODE Fully Compatible With ESP8266
Features:-
- SOC characteristics.
- Built-in Tensilica L106 ultra-low power 32-bit CPU, main frequency supports 80MHz and160MHz and RTOS.
- Built-in TCP/IP protocol.
- Built-in one-channel 10-bit high precision ADC.
- Outboard interface: HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO.
- The deep sleep current is 10uA, the cut-off current is smaller than 5uA.
- Wake, connect and transmit data package within 2ms.
- The consumer power is smaller 1.0Mw (DTIM3) when at standby status.
- Built-in 1M byte for SPI Flash.
- Ultra-small size.
- Support serial to WiFi.
- Wireless transparent transmission.
- Long-distance transmission with ultra-low power.
- Support outboard antenna.
- Bearing high temperature to 125 °C, compared to the 85°C for ESP8266.
Mini LCD Digital Thermometer Sensor Wired for Room Temperature
Features:-
- Temperature Range: -50 to +110°C
- Temperature Display Resolution: ±0.1
- Temperature Measurement Accuracy: 1°C
- Cable Length: 1 Meter
- Easy to use, small, and handy module.
- Module powered by a pair of LR44 button batteries.
- Display Size: 34 x 15 mm
- Dimension: 46 x 26 x 15 mm.
Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone
Features:
- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6 pin ISP header
- 2 independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections.
Mini SMD NRF24L01 2.4G wireless data transmission module
Features:
- Maximum operating speeds up to 2Mbps
- GFSK modulation efficiency, Anti-interference ability,
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 to 3.6V, only 1uA on Power-down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator.
Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module Fully Compatible With ESP8266
Features:-
- Model: ESP8285 ESP-M3
- 32-bit Tensilica L106 microcontroller
- Ultra-low 16 bit RISC
- Fully Compatible with ESP8266
- Embedded TCP protocol
- channel high-precision 10-bit ADC
- Supporting the most commonly used networks (802.11 b / g / n)
- Support WPA, PA2PSK and WPS
- Working temperature: -40 ℃ – + 125 ℃
- Clock Speed: 80 MHz; (max 160 MHz)
- Flash memory: 1 MB.
Mitsumi R-14 A341 370 DC pump 6V 200mA Oxygen Pump Tank Motor
Features
- High-Quality Pump
- Operating Voltage 6VDC
- Low Noise Operation
- Durable and Longer Lasting
MJX 1/14 Hyper Go 14209 4WD RTR
This item: MJX 1/14 Hyper Go 14209 4WD RTR 43KM/H 2.4GHZ Brushless High Speed RC Car$159.00
New Upgraded 3S Battery 11.1V 25C 2000mAh L I-PO Battery with T Plug for MJX 16208 16209 14209 14210 RC Car$31.90
MJX 2S 7.4V 25c 3000mAh L I-PO Battery with T-plug for MJX 16208 16209 14209 14210 RC Car$31.90
MJX 14210 1/14 Hyper Go 4WD RTR 55KM/H 2.4GHZ Brushless High Speed RC Car Vechile$158.00
MJX 1/14 Hyper Go 14209 4WD RTR 43KM/H 2.4GHZ Brushless High Speed RC Car Vechile Models
MJX 14210 V3 1/14 Hyper Go 4WD RTR
Features:
1. Metal hydraulic shock absorber;
2. Standard 2S battery 55km/h
3. 45A independent brushless ESC with cooling fan
4. 2852 4400kv four-pole brushless motor;
5. Chrome steel gear differential, chrome steel + powder metallurgy gear, metal chassis
6. All-metal transmission system (steel metal gear differential);
MJX 16207 HYPER GO 1/16 Brushless High Speed RC Car Vechile Models 45km/h
Package included:
1*RC Car
1*Controller
1*Rechargeable battery(built-in)
1*Charger
1/12 Metal Brushless 4WD RTR Buggy X12S
With a 2845-3600KV brushless motor and 45A ESC, the X12S delivers 3S brushless power straight out of the box—no costly upgrades needed for speeds up to 60-90KMH
This brushless buggy comes ready out of the box to bash and blast on any terrain including a 3S (11.1V 2200 mAh) battery. A bag of spares and accessories is also included in the box for you.
Crafted from 1.2mm PC material, featuring bright, unique color schemes with two stunning options. Includes a wing for added downforce, designed in a off-road racing style.
X12S chassis and shock towers are made from high-strength aluminum alloy, offering excellent durability and resistance to deformation, ensuring stability and performance on any terrain.
Easily limit the max speed to 50% or 75% to help you to safely learn control skills until you’re ready for full power.
FMS FCX10 1/10th Land Cruiser LC80 RS Grey
The Ideal 1/10 Scale RC Car for Off-Road Adventures.
Authorized by Toyota, the 1/10 Land Cruiser 80 from FMS Models adopts the FCX10 crawler chassis, which faithfully provides the off-road performance
of the original car.
To ensure durability, the body is moulded in a PC material and is equipped with mirrors and waders. Through the transparent windows you can see a detailed driver figure, exquisite dashboard and cockpit interior. The roof is equipped with a luggage rack and four offroad lights, while a climbing ladder is mounted at the rear. The vehicle comes pre-installed with headlights, front turn signals, side turn signals, rear turn signals, reverse lights and other lighting components. The bodyshell uses a magnetic interface to draw power from the chassis, allowing the lights of the entire vehicle to be activated with a single button on the remote control. Additionally, we also have pre-installed fenders to keep mud from spilling onto the body and chassis.
The whole chassis adopts the mainstream middle front power layout with four-link sus-pension. The mid-front motor and transmission, as an integral unit, have a lower center of gravity compared to similar products, resulting in a lower roll centre and a reduced likelihood of rollovers. Meanwhile, metal-geared waterproof servos placed to the side of battery compartment are responsible for switching high and low speeds.
In terms of convenience and daily maintenance, FMS has given this good consideration. The battery compartment can be flipped back or “quick release”. The electronic equipment is concentrated within the middle of the chassis, providing convenient maintenance, removal or replacement. FMS have innovatively designed a knob-type quick re-lease structure, and at the same time, the power and signal cables of the lights are perfectly
integrated with the magnetic module.
Except for an adventurous heart, you don’t need to prepare anything, FMS will take you on your off-road journey!
MJX H8H V2 All Rock Brushless 1:8th Scale Crawler Truck
MJX H8H V2 ALL ROCK 1:8 scale RC Crawler Climbing truck. Marketed as a climbing truck, the H8H is unique in that it can master both slow speed crawls and high speed pursuits (17mph+) with plenty of power available for on-demand wheelies.
The MJX H8H truck is absolutely packed with features with a IP67 rating for water and dust protection, remotely switchable high/low speed transmission, controllable LED lights and bluetooth/smart phone connectivity.
Driving control is aided by a 35KG steering servo, fully metal drive transmission, front and rear lockable differentials, high/low speed gears and a unique FOC vector control system providing absolute control of the magnetic encoded-sensing brushless motor system. Fully compatible with both 7.4v 2S and 11.1v 3S LiPo batteries with front and rear battery trays.
MJX Hyper Go 10208 V2 Version RC Monster Truck 1:10 Scale 80km/h 4WD RC Car
MJX Hyper Go 10208 V2 Version Monster RC Truck 1:10 Scale 80km/h 4WD RC Car
MJX Hyper Go10208 1/10 Scale Model Car: Achieve speeds of 60km/h with a 3S battery and 80km/h with a 4S battery. Equipped with an independent receiver, it offers a remote control range of up to 120 meters. Featuring a 35KG metal servo, a 3970 2500KV brushless motor with a cooling system, and a chrome steel 100A independent brushless ESC compatible with 2-3S batteries. The ESC parameters can be adjusted via an app for customized performance.
MJX Hyper Go 14303 – High-Speed 1/14 Scale 2.4GHz Brushless 4WD RC Car
This item: MJX Hyper Go 14303 – High-Speed 1/14 Scale 2.4GHz Brushless 4WD RC Car
Standard version(with 1 battery)
Rlaarlo Metal 1/14 Scale Brushless RTR Monster Truck, ROG1
- Gladiator ROG1 is a compact Monster Truck at 1/14 scale perfect for enthusiasts of all levels. Its small size fits easily in a backpack, so you can enjoy fun anytime, anywhere.
- With a top speed of 100 km/h, it’s ideal for speed seekers. The adjustable throttle allows beginners to practice control at lower speeds.
- Gladiator’s strong power not only allows standing backflips but also has excellent rollover capability. After a rollover, you don’t need to pick up the car manually, just rock the car using short throttle bursts and it will automatically return to an upright position, saving you the trouble of picking up the car
- The car shell features a vibrant color painting with simulated decorations, crafted from 1.2mm PC material. The front, roof, and rear are equipped with black nylon guards, providing extra protection.
Rlaarlo Omni RZ001B-C Carbon Fiber 1:10 Scale RTR Brushless Monster Truck
Description
- Geometric Structural Design: The world’s first small-scale central differential structure, providing a responsive feel even in a small scale. The fully enclosed triangular support frame and support plate of the central differential form a triangular structure
- Better vehicle control: The Carbon Fiber Version of the RZ001 is equipped with a GYROSCOPE, which significantly improves stability and control performance, allowing for better vehicle control and a higher level of driving experience
- Chromium Steel Spiral Gears: The helical gear’s helical gear face design provides smooth, high-torque, low-noise, high-efficiency transmission with good abrasion resistance, making it suitable for scenarios that require high transmission performance and reliability.
- Dual Specification Battery Compartment Design, Accommodating a 3s-5000mAh large battery for extended runtime without the need for frequent battery changes.
- With a strong body structure and enlarged gearing, you can hit high speeds in virtually any environment – off-road, dirt and grass, parking lots, and paved and asphalt surfaces.
- Equipped with a center differential structure for enhanced maneuverability and full-throttle freedom over rough terrain, slick surfaces and loose dirt
MJX Hyper Go 20208 1/20 Scale 4WD Brushless RC Off-Road Speed Car 39km/h
MJX 20208 RC Car 1/20 Scale 4WD 1806 Brushless Motor 39km/h MJX Hyper Go
Introducing the MJX 20208 RC Car, a 1/20 scale 4WD brushless RC car that offers a balanced blend of efficiency and durability for all your leisure pursuits.
Smooth Performance for Every Adventure
MJX Hyper Go H12Y RC Car 1/12 4WD Brushless 2.4G Full Large Scale Climbing Off Road Vehicle
The MJX 1/12th H12Y 4WD Crawler offers great looks, exceptional reliability, and a powerful crawling experience. It is packed full of amazing features, and the included brushless motor supplies enough power to climb and tackle just about any mountainous terrain.
Some of the outstanding features of this incredible crawler are an aluminum alloy body shell that is held in place with magnets, front, and rear portal axles for increased ground clearance, ball races throughout, a mainly metal drive train, adjustable independent suspension, alloy chassis rails, a usable spare wheel, and an LED light system. Power and control of the drive train are supplied by a powerful 3650 3500KV sensorless BLDC brushless motor, a 45A waterproof sensored ESC, and a 2S (7.4V) 2000mAh Li-ion battery.
The H12Y chassis is built to be an extremely tough and rugged crawling platform that will take all you can throw at it. The molded components are made of a tough, yet flexible composite plastic, and the metal gears are powder-coated with a hardened material to reduce wear.
Being ready to run, the H12Y 1/12th Crawler comes complete with a dedicated 4ch 2.4GHz transmitter, receiver, a 20kg torque metal-geared steering servo, a 2S 2000mAh Li-ion battery, and a USB charger, you will just require 2 x “AA” batteries for the transmitter.
Mjx M163 Offroad
Introducing the MJX MEW4 M163 monster trucks. Praised by countless RC enthusiasts on YouTube (check for yourself!), the M163 models offer exceptional reliability and high-speed performance all packed into a highly portable 1/16th size model. Each vehicle features quality components using 2.4ghz radio equipment to eliminate interference and powerful LiPo batteries to provide a thrilling RC experience.
Like all MJX models, the M163 truck features fully serviceable and user-configurable parts including adjustable independent suspension, multiple shock absorber positions, adjustable camber and adjustable chassis clearance. Most parts can be upgraded including the chassis strengthened with alloy parts.
MK2B PCB Heatbed 12V/24V
Features
- 2 layer, 35μm copper
- Copper plated holes
- The resistance between 1.0 and 1.2 ohm
- Active heated area: 200 mm x 200 mm.
- 209 mm center-to-center mounting holes (outside the active area).
- Support 12V, 24V power.
- Double-sided, the other side is no wiring, heating uniformity, smooth printing.
- Regardless of the positive and negative terminal, you can free wiring
MK7/MK8 Extruder Hotend Kits With Heated Block M6*30mm Throat 1.75/0.4mm Nozzle 12V40W Cartridge Heater 3D Printer Part
Features:-
- 42mm high-quality stepper motors have high torque and less heat build-up.
- Special ceramic heating insulation cotton guarantee stability; energy saving.
- Direct transmission, without heavy gear, compact size and weight
- There are a variety of specifications to choose the most suitable is the best
- Movement shaft speed 40mm / s, heating nozzle
- 100K NTC thermistor, cooling fan.
MK8 extruder aluminum block DIY kit
Right Side MK8 extruder Aluminum 3D Printer Block
This is a high-quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user. Since this is very popular numerous assembly instructions and videos are available on the internet which will help you build your extruder.
The MK8 Extruder is available in 3 different types – Right Side, Left Side and Right Short. These extruders differ in the direction in which the filament is extruded with respect to the extruder block. When using single extruders, any extruder can be used. When using dual extruders you can use one right side and one left side
MK8 Extruder Drive Gear 26Teeth 11x11mm
This is a 26 Tooth Extruder Drive Gear that fits into extruder assemblies and firmly grips the 3D Printing Filament to move it towards or away from the hotend assembly. It is capable of high torque without damaging the filament, and fits directly onto the shaft of NEMA 17 Stepper Motors, making it simple to install but effective at assisting with consistent extrusion.
These particular Extruder Drive Gears are made for the All type of 3D printer extruders and ensure that the filament is moved into the melt zone when extrusion is happening while pulling it back when the hotend is moving across the print bed. This translates to smooth and consistent extrusion, with improved print quality, and reduces the chances of clogging or similar problems. Although this is a basic little part, it is a vital part of the extruder system and counteracts the back-pressure of the melted filament within the hotend assembly.
Typical Applications For The Extruder Drive Gear is for extruder Drive Gear is designed to fit the TEVO Tarantula, but could be used on many other similar 3D Printers, or even in different machines altogether. It is made from brass, which is durable but soft enough to prevent filament damage, and has a tiny form factor to easily fit without requiring any extra modifications.
MMA845 module digital triaxial accelerometer precision tilt 3-axis
Features:
- Power Supply: 3v-5V.
- Pitch: 15mm.
- Mounting hole diameter: 3mm.
- IIC digital output.
- Up to two interruption functions.
- ±2 g/±4 g/±8 g dynamically selectable full scale
- Three motion detection channels.
- Freefall down or motion detection.
- Automatic ODR change for auto-wake and return to sleep
- Pulse detection.
MMA845 module digital triaxial accelerometer precision tilt 3-axis (Copy)
Features:
- A d-type amplifier without a filter, low quiescent current, and low EMI.
- When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
- Low THD, low noise.
- Short circuit protection; thermal protection.
MN-82 PRO 1:12 TOYOTA LAND CRUISER LC79 4WD R/C VEHICLE (SILVER)
The MN-82 1:12 Toyota Land Cruiser LC79 4WD R/C vehicle is a high-quality and detailed replica of the iconic off-road vehicle. This remote-controlled model features a durable construction and realistic design, perfect for enthusiasts of all ages. With its 4-wheel drive capability, it can tackle various terrains with ease, providing an exciting and thrilling driving experience. The precise 1:12 scale ratio adds to its authenticity, while the easy-to-use remote control allows for smooth and responsive maneuverability. Whether navigating through rough trails or displaying on a shelf, this Toyota Land Cruiser RC vehicle is sure to impress with its attention to detail and performance.
What is new in the 2024 MN-82 RC Truck
Proportional Throttle Steering with 280 Motor
Leaf Spring Suspension and 17g Waterproof Servo
46° Maximum Climbing and 2 Throttle Rate
1/12 Scale RC Rock Crawler Highly Realistic
RC Crawler Officially Licensed by Toyota
MNRC MN82S RC Car 1/12 Scale 2.4G 4WD For Toyota LC79 Off-Road Vehicle (Black)
The MN-82S 1:12 Toyota Land Cruiser LC79 4WD R/C vehicle is a high-quality and detailed replica of the iconic off-road vehicle. This remote-controlled model features a durable construction and realistic design, perfect for enthusiasts of all ages. With its 4-wheel drive capability, it can tackle various terrains with ease, providing an exciting and thrilling driving experience. The precise 1:12 scale ratio adds to its authenticity, while the easy-to-use remote control allows for smooth and responsive maneuverability. Whether navigating through rough trails or displaying on a shelf, this Toyota Land Cruiser RC vehicle is sure to impress with its attention to detail and performance.
What is new in the 2024 MN-82 RC Truck
Proportional Throttle Steering with 280 Motor
Leaf Spring Suspension and 17g Waterproof Servo
46° Maximum Climbing and 2 Throttle Rate
1/12 Scale RC Rock Crawler Highly Realistic
RC Crawler Officially Licensed by Toyota
MN-99S Land Rover Defender 90
Feature:
1. DIY accessories are detachable and replaceable, high playability.
2. Full-scale simulation control: forward/backward, left/right turn. Full scale steering gear control.
3. Upgradeable, simulated lighting, simulated rubber tires with a firmer grip and resistance to friction.
4. SM plug, 7.4V/1200mAH large capacity lithium battery, strong power, long-lasting battery life, 260 motor.
5. Upgraded Alloy , anti-wear and fall resistance, 2.4GHz anti-interference automatic code, multi-car competition.