Johnson B 10 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 10 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 12 |
| Stall Torque(Kg-Cm) | 20 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
Johnson B 60 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 60 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 2.5 |
| Stall Torque(Kg-Cm) | 8 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
Johnson B 200 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 200 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 3.5 |
| Stall Torque(Kg-Cm) | 10 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
| Shaft Diameter (mm) | 6 |
| Shaft Length (mm) | 25 |
Johnson B 150 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 150 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 5 |
| Stall Torque(Kg-Cm) | 10 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
| Shaft Diameter (mm) | 6 |
Nano V3 Ethernet Shield
Features
- ENC28J60 Ethernet chips, SOP28 package
- SPI Interface
- 1×10 connector, can be easily mounted with the MCU
- Built-in isolation transformer RJ45 connectors HR911105A
- Power LED
- Single Supply: +3.3 V
- 25Mhz Crystal
- PCB size: 48×18 mm
Johnson B 300 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 300 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 2.5 |
| Stall Torque(Kg-Cm) | 8 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
A2212 China Motor 1400KV
Features
- Model: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
6v 200mA
Features
- Polycrystalline solar cell
- Max output power: 1.1W
- Max working voltage: 6.6V
- Max charging current: 110mA
- Min output power: 0.6W
- Min working voltage: 6V
- Min charging current:200mA
- Small Epoxy Solar Panels are simple to install or add to your existing product
- Construction requires no frame or special modifications
- Small space required for installation.
12v 200ma Solar panel
Features
- Output voltage：12V
- Output current: 200mA
- Service life: more than 5 years
- High transfer efficiency
- Non-pollution and reproducible
- 2.4-watt polycrystalline solar panel
- High conversion speed, high-efficiency output.
- Excellent low light effect.
- High transmittance tempered glass.
- Small Epoxy Solar Panels are simple to install or add to your existing product.
MG995 (360 degree)
Features
- Model: MG995
- Weight: 55 gm
- Operating voltage: 4.8V~ 7.2V
- Servo Plug: JR
- Stall torque @4.8V : 13kg-cm
- Stall torque @6.6V : 15kg-cm
GP2Y1010AU0F Optical Dust Sensor
Features
- Power supply voltage: DC5 ± 2V
- Sensitivity: 0.5V / (0.1mg / m3)
- The minimum detection level of particles: 0.8 m
- Clean air voltage: 0.9V typ.
- Low consumption current (Icc: MAX. 20 mA)
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
Solid State Relay Module SSR-25DA 25A /250V 3-32V DC Input 24-380VAC Output
Features:
- Model: SSR-25DA
- Operating Voltage(VDC): 3-32
- Operating Load Voltage (VAC): 24-380
- Rated Load Current (A): 25
- Color: Light Gray.
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
Features:
- Long Service life and high Reliability
- Reduced Electromagnetic Interference
- Highly reliable, compact size designed to offer users maximum simplicity
- Trigger Voltage: 3-32VDC
- Switching Voltage: 24-380VAC@40A.
3.7 G
Features
- Operating Speed (4.8V no load): 0.1sec/60 degrees
- Stall Torque (4.8V): 8.32oz/in (0.6 kg/cm)
- Temperature Range: -30 to +60 Degree C
- Operating Voltage: 4.8-7.2 Volts
- Colour: Blue.
RDA9851 CPR9851S Bluetooth MP3 FM module
Features
- Supply voltage 3.2V ~ 4.2V
- Current consumption when the normal operating current 45mA, 32mA Play Pause
- Separation 50dB SNR 70dB
- supports MP3/WMA/WAV/SBC
- Wireless stereo transmission, Bluetooth phone
- BT card reader as it supports USB host so can read data from SD or MMC
- Stereo audio Line-in input
- IR remote control
- Bluetooth version Bluetooth V2.1 + EDR
- UART port for serial communication, and can customize AT communication protocol
- Integrated power management circuit
- High-speed UART interfaces, for debugging or updating software
7045 propeller
Features
- Comes with thin and wide blades
- 7045(7×4.5) Propellers Black features epoxy resin cover.
- It comes with a set of plastic reducers (3, 3.17, 4, 4.70, 5, 6, 6.25 mm).
- Quick to release, quick to attach
- New design propellers, with greater aerodynamic efficiency, good lifting capacity.
16 Channel 12-bit PWM Servo Drive Shield Board -I2C PCA9685
Features
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
- 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1″ so you can only stack 4 next to each other on 0.1″ header
- “Chain-able” design
Arduino Uno
Features
Microcontroller : ATmega328 SMD.
Operating Voltage : 5V.
Supply Voltage recommended : 7-12V DC.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
DC Current per I/O Pin : 40 mA.
Male to Female Jumper Wires
Features
- Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers
- weight: 0.2 gms
- Good quality Product
- Country of Origin: India
XH-W1401 12V Digital Led Thermostat Module Temperature Controller With Display
Features:-
- A Simple Temperature Sensor Module with 12V Relay
- Model: XH-W1401
- Thermostat Range: -9℃ to 99℃
- Thermostat Accuracy: 1℃
- Power Supply: DC12V
- Output : Electric relay output ,capacity 220V 10A/12V 10A
- For cooling or heating temperature control.
RS232 TO RS485 Convertor
Features
- Transmission distance: 1.2 mile (RS-485), 5 meters(RS-232)
- Transmission Speed: 300-115200 bps
- Working Modes: Asynchronous, half-duplex, differential transmission
- Transmission Media: Common wire, doule wire, UTP or Shielding Line
- Work Environment: -10°C to 85°C
XH-M602 digital control battery lithium battery charging control module switch Protection board
Features:-
- High-Quality Protection Board
- A plastic transformer which provides corrosion, moisture, rust resistance, high safety factor.
- Real-time battery voltage monitoring.
- Automatic charger switch off when battery get’s full.
215 mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw PR53
The 215mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.
It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.
“150mm 6 inch LCD Digital Electronic Vernier Caliper Gauge Micrometer Measuring Tool Caliper Ruler Digital Caliper Plastic “
Features:-
- Made of industrial plastics.
- Internal, external and height dimensions can be easily and accurately measured.
- Zero setting in any position.
SEN-HZ21WI DN15 1/2 Copper Water Flow Sensor Output Flow Sensor Switch
Features:-
- Model: SEN-HZ21WI
- Material: Copper
- Colour: Gold
- Type: 1/2(External Thread Diameter)
- Water quality requirement: ≤60℃
- Flow range: 1-30L/min
- Maximum water pressure: 1.75MPa
- Three-wire connection: Red for positive pole, black for negative pole, yellow for pulse signal
- Lightweight, reasonable size, stable performance, low water pressure start, easy to install, safe to use
- Weight: approx. 95g.
Mini DC 5A Motor PWM Speed Controller 3-35V Speed Control Switch LED Dimmer
Features:
- Operating voltage: DC 3V-35V.
- Output current: 0-5A
- PWM Motor Speed Controller.
- Control power: Maximum 90W.
- Quiescent current: 0.01A (Standby).
- Material: plastic, metal.
- PWM duty cycle: 1%-100%.
- PWM frequency: 10 kHz.
RB NEMA 23 (57mm) Coupling 6.35x8mm
Features:
- Material: Aluminium.
- Bore Diameter d1: 6.35 mm.
- Bore Diameter d2: 8 mm.
- Length: 25MM.
- Known as Beam coupling, helical coupling, Flexible coupling
- Quality assured branded couplings.
- It provides a good hold of the Motor Shaft.
- Ensure the safe operation of your robot.
- Weight: 128 gm.
Force Sensor 5.08MM
Features
- Easily customizable to a wide range of sizes
- Cost-effective
- Ultra-thin; 0.45 mm
- Robust; up to 10 million actuations
- Simple and easy to Integrate.
Digital STC-1000 all purpose temperature controller thermostat with sensor
Features:
- Temperature measuring range: -50 – 99°C.
- Resolution : 0.1°C.
- Accuracy : ±1°C (-50 – 70°C).
- Sensor error delay: 1 minute.
- Power supply: 220VAC±10%, 50/60Hz
- .Power consumption: ≤3W.
- Sensor: NTC sensor (1PC).
- Relay contact capacity : Cool 10A/250VAC;Heat 10A/250VAC.
- Ambient temperature : 0 – 60°C.
- Storage temperature : -30 – 75°C.
MAX6675 k type Tem.Sensor
Features
- Internal integrated cold junction compensation circuit;
- With a simple three serial SPI interface;
- Temperature signal can be converted into 12-bit digital
- Embedded thermocouple break detection circuitry.
- High impedance differential inputs.
- Operating Voltage(VDC): 3 to 5.5
- Temperature Range(°C): 0 to +1024
- Cold Junction Compensation Range(°C): -20 to +80
MAX7219 Dot Led Matrix Module 4 In 1 Display with 5P Line Module For Arduino Micro-controller
Features:-
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCB Dimensions: 128×32 (LxW) mm.
ESP8266-12E 10A 220V Network Relay WIFI Module Input DC 7V~30V
Features
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
DC 3.7V 7mm x 16mm Magnetic Micro Coreless Motor + Propeller
Features
- Fiber Glass Material
- No batteries Battery
- Non Rechargeable
- Width x Height: 30 mm x 40 mm
MK7/MK8 Extruder Hotend Kits With Heated Block M6*30mm Throat 1.75/0.4mm Nozzle 12V40W Cartridge Heater 3D Printer Part
Features:-
- 42mm high-quality stepper motors have high torque and less heat build-up.
- Special ceramic heating insulation cotton guarantee stability; energy saving.
- Direct transmission, without heavy gear, compact size and weight
- There are a variety of specifications to choose the most suitable is the best
- Movement shaft speed 40mm / s, heating nozzle
- 100K NTC thermistor, cooling fan.
10 Pieces Diamond Burr Bits Drill Kit for Engraving Carving Rotary Tool Set
Features:-
- High-quality diamond-coated bur set with 3.1mm shanks
- Suitable for the hanging mill, electric mill, engraving machines, electric machinery
- Can Carve wood, plastic and other soft materials
- Can be used to various applications including carving, grinding and etching on a variety materials
- Perfect For All Sorts Off Jobs Like Model Making,
- Compatible With Other Multi-Tool Machines
- Supporting assembly mainly used to polish glass, jade, repair abrasive and other hard objects electroplated diamond grinding
- 10 pieces assortment of various shapes and sizes bits
- Come in different sizes and coarseness to satisfy any technology fit most professional electric drills,
250 Volts Float Switch Sensor for Water Level Controller with 3 Meter Wire
Features:-
| Brand Name : | Dehmy |
| Power Supply : | 250 V |
| Model No : | Float |
| Type of Product : | Water Level Sensor |
| Material : | Plastic |
| Electrical Endurance : | 500,000 times |