Force Sensor 14.7MM
Features
- Shape: Circular.
- Sensing Area diameter (inch): 0.5.
- Min Force: 100 gm.
- Max Force: 10Kg.
- Length (mm): 60.
- Weight (gm): 2.
Controller – 24v 350W
Features
- Rated voltage: 24 v DC
- Current limit: 33A
- Rated power: 350 w
- Matching motor: dc brushed motor
- Under Voltage Protection: 20V
Planetary 100 rpm
Features
- Output RPM: 100 rpm
- Stall Torque: 2.5 Kg/cm
- Stall Current: 750 – 800 ma
- Motor body Length: 75mm
- Motor Body Diameter:35mm
- Material: Cast Iron
- Shaft diameter: 6mm
- Working Voltage: 12V
offside 24v 10 rpm
Features
- Output RPM: 10 rpm
- Stall Torque: 18 Kg/cm
- Stall Current: 750 – 800 ma
- Motor body Length: 75mm
- Motor Body Diameter:35mm
- Material: Cast Iron
- Shaft diameter: 6mm
- Working Voltage: 12V
ESP8266-01 5V Wifi Relay Module TOI APP Controled For Smart Home Automation
Features
- Onboad module: ESP2866 WIFI module
- Onboard relay: 5v.10a/250v ac, 10a/30v dc
- Can connect 5 clients at the same time on AP mode
- The module has two work modes: Cell phone, carry on Wi-Fi module and Cell phone and Wi-Fi module carry on the same router
- Used in mobile phone, Wi-Fi module equipped with one router and control relay by APP
- Maximum transmission distance of 400 m when cell phone carry on wifi module directly, in the open environment
- Transmission distance depends on routers signal intensity when wifi and cell phone is carrying on the same router
PIEZO Vibration Sensor
Features
- Flexible PVDF Piezo Polymer Film.
- Wide dynamic range.
- Laminated for higher voltage output.
- 0.1″ breadboard friendly leads.
Wireless Module A7 GSM GPRS GPS 3 In 1 Module
Features:
- Board Based On AI-Thinker A7 GPRS Module
- Supports Firmware Upgrade Via Serial Port
- Operating Voltage: 5v.
Waterproof mobile charger for ebike
Features:-
- Electric Scooter Mobility Mobile Charger
- Features:Waterproof
- USB 36V-108V power supply Socket
- 2A USB adapter.
Educational Robot STEAM Kit with instruction manual – Line Tracker following Robot Car kit and multiple gameplay
Features:-
- Easy to Assemble
- Operating Voltage: 3V
- Line Map included
- Battery is not included
Ramps 1.6 For 3D Printer Parts
Features:-
- Input voltage: 12V.
- Power: 200W.
- Patch MOS tube: B55NF06.
- Ramps 1.6 is a 4-layer board.
- Can be extended to LCD and other parts.
- There are heater and fan MOSFET outputs and 3 thermistor interfaces
- Support motor drivers: support A4988 DRV8825 and other motor drivers(support five motor drivers Simultaneously).
- 5A additional security and component protection fusion.
- Heated bed controls additional 11A fuses.
- Applied to 5 Pololu stepper drive board.
DJI FPV Damper Rubber Ball 4pcs
1. Made of high-quality materials, reliable and durable
2. Repair parts, used for accidental damage replacement
DJI FPV Vision Bracket Upper Cover Shell
Made of high-quality materials, reliable and durable.
Repair parts, used for accidental damage replacement, making repairs more worry-free.
Long service life and easy to install.
Easy to install without any instruction.
16-Channel 12v Relay Module
Features
| Channel | 16 |
| Trigger Voltage (VDC) | 12 |
| Trigger Current (mA) | 20 |
| Switching Voltage (VAC) | 250@10A |
| Switching Voltage (VDC) | 30@10A |
| Length (mm) | 180 |
| Width (mm) | 90 |
Coreless Motor + Propeller 7×20
Features
- Model: 8520
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V. @ 0.12A
- Rated RPM: 50000.
- Wire Length: 6cm
- Prop. Length: 55 or 65 mm
FlexiForce Tekscan A101 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
EMAX BLHELI 12Amp ESC for quadcopter / Drones
Features:
- Based on BL Heli firmware.
- ESC Type: Brushless.
- Built in linear or switched BEC.
- Constant Current: 12A
- Burst Current: 15A
- BEC Mode: Linear BEC : 5v / 1A
- Lipo Cells: 2-4
- Constant Current: 12A.
- Support: One-shot 125 Protocol.
- Includes low voltage protection, over heat protection, and self-check functions.
UNO R3 +WiFi ATmega328P+ESP8266 Module CH340G Compatible For Arduino Uno
Features:-
- USB-TTL converter.
- Logic Level: 5V.
- Operating Supply Voltage: 5V.
- Digital I/O Pins: 14.
- Analog I/O Pins: 6.
HLK-SW16 16 Channel WiFi Controlled Relay Board
Features
- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
Orange eABS – 1.75mm 3D Printing Filament 1kg
The appearance is White, non-transparent.
Non-toxic, tough, hard texture, with good temperature tolerance and creep resistance.
Good melt fluidity, print smooth, nice abrasive resistance and dimensional stability, oil resistance.
Orange PETG 1.75mm 3D Printing Filament 1kg
Higher-strength, lower shrinkage, and smoother finish than ABS & PLA
Combines good strength with ductility, making it a good, tough material for mechanical parts
Good chemical resistance
Often features a nice, translucent finish
Contains UV absorber
Good hydrophobicity (doesn’t absorb water easily), good for high humidity storage & usage
6 in 1 DIY Solar kit for Kids, Solar Powered Vehicles, Science Educational Toys for Kids STEAM Kits
Features:-
- Product name: STEM Solar Power Science Educational Toy Set
- Product size (After assembly):
- Robot: 5 x 5 x 8 cm
- Helicopter: 25.5 x 8.5x8cm
- Submarine: 14 x 8 x10.5 cm
- Mildwill: 8.5×8.5x9cm
- Aircraft: 25.5×8.5 x17cm
- Car: 6.5 x 5 x5.5cm
- Package Dimensions: 19*6*24CM
- Suit for : 10,11,12,13,14 years old Boys, Girls, Kids, Children, toddler, nephew, niece, granddaughter, grandson, friends, Birthday, Christmas, party or other holiday gifts.
1000-4x HSS Flute Countersink Drill Bit Screw Woodworking Chamfer Home War
Features:-
- Suitable for all hand and power drills
- Suitable for hardness lower material, such as wood
- 5 Flutes chamfering device Drill bit
- Material: HSS
- Surface treatment: Titanium
- Suitable for all Woods and Soft Metals.
- Four piece set includes bits for drilling location holes for screw sizes 3mm, 4mm, 5mm, 6mm.
- Adjustable counter sleeve depth with wrench.
- Drill and countersink for wood screws without changing bits.
- Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew.
Small Electric Drill Bit Collet Micro Twist Drill Chuck Set – 952211-05 3mm
Features:-
- Material: Copper.
- Material: Stainless Steel
- Excellent workmanship: 0. 5 3. 0mm
- Item Weight 30 Grams
- Drill collet size: 0. 5mm, 1. 0mm, 1. 5mm, 2. 5mm, 3. 0mm.
CR-10 Extruder Upgraded Replacement Aluminum MK8 Drive Feed 3D Printer Extruder for Ender 3 CR-10 CR-10S CR-10 S4
Features:-
- This extruder set is great for Creality 3D Ender 3 ender 3 pro-CR-10.
- Filament Materials: PLA/ABS/Wood/TPU/PTEG,
- Made of high quality metal material.
- Easy and convenient to use.
- With high quality and durable performance.
- Main material: MetalMounting screws.
- Aluminium MK8 extruder frame, with bored intake hole.
- Spring. Brass extruder drive gear.
- Special Bowden tube fitting (great improvement over stock).
- For all 1.75 mm filament.
- Right hand extruder kit
- MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
DJI FPV Gimbal Camera Shaft Arm
Made of high-quality materials, reliable and durable
Repair accessories, used for accidental damage and replacement, so that maintenance is more worry-free
Perfectly fit for your DJI FPV Drone
Long service life and easy installation
DJI FPV Combo P Shaft Upper Cover
Made of high-quality materials, reliable and durable
. Long service life, easy to install
. Repair/Replacing old, broken, cracked, damaged P-axis arm upper cover
Orange ePLA – 1.75mm 3D Printing Filament 1kg
Good flow properties
Diameter tolerances of ± 0.1mm checked with laser monitor
Smooth surface with even rounding
Lower melting temperature
Compatible with almost all 1.75mm FDM printers
Easy to use
MP3 FN-M22P
Features
1. With high quality audio decoder, supports MP3 and WAV audio formats.
2. Sampling rates supported: 8/11.025/12/16/22.05/24/32/44.1/48(KHz).
3. 24 bit DAC output and supports dynamic range 90dB and SNR 85dB.
4. Supports key control mode, parallel control mode and UART serial port control mode.
5. Possible to update audio files in the SD card via the USB connecting with PC.
6. Supports maximum 3000 audio files under the root directory of the storage device.
7. Supports maximum 99 folders and each folder stores maximum 255 audio files.
8. Supports playback of multiple audio files one by one without pause.
9. Supports advertisement inter-cut function during playing a sound.
10. Built-in double 3 watts amplifiers that can drive two 3 watts speakers directly.
11. Adjustable 30 levels sound volume.
Finger Print R305
Features
- Operating voltage (v): 4.2 ~ 6 VDC
- Current consumption: ≤75mA
- Verification Speed: 0.2 sec
- Scanning Speed: 0.3 sec
- Character file size: 256 bytes
- Template size: 512 bytes
Water flow sensor SEN-HZG1WA Pulse Output 4~45L/min Liquid Switch Flowmeter
Features:-
- This is a small zise product that easy to install.
- Made of good quality material, the product is precise and durable, no power consumption.
- Suitable for gas water heater, electric water heater, washer, wall-hanging stove, electromagnetic water
- Heater, intelligent IC water meter,cooling system, circulatory system, heating equipment,etc.
- Three lines: red is positive, black is negative, yellow is pulse signal.
2004 LCD Display Smart Controller For RAMPS1.4 Reprap 3D Printer PR34
The 3D printer 128×64 Smart LCD controller for ramps 1.4 contains an SD-Card reader, a rotary encoder and a 128×64 LCD display. You can easily connect it to your RAMPS board using the “smart adapter”.
After connecting this panel to your Ramps you don’t need your pc anymore, the Smart Controller supplies power for your SD card. Furthermore, all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
Compares to the 2004 Smart LCD Controller With Adapter, this 128×64 screen can display much more information, which would help for you run the 3D printer without a computer.
3D printer 12864 Smart LCD controller for ramps 1.4 PR2
The 3D printer 128×64 Smart LCD controller for ramps 1.4 contains an SD-Card reader, a rotary encoder and a 128×64 LCD display. You can easily connect it to your RAMPS board using the “smart adapter”.
Flex Sensor 4.5”
Features
- Angle Displacement Measurement
- Bends and Flexes physically with motion device
- Simple Construction
Orange PLA+ 1.75mm 3D Printing Filament 1kg
Consistently High Quality
10 times stronger than regular PLA on the market
Deliver exceptional performance
Made from great, high-performance materials
Ready to print on any open source desktop or industrial printer
Afr-2000 G1/4” Air Compressor Water Filter with Regulator Air Tool Cleaning
Features
- Model: AFR2000 (AFR is the model, 2000 refers to the port size)
- Operating Fluid: Air
- Joint pipe bore: G 1/4″
- Range of Adjustable Pressure: 0.05-0.99 MPa
- Adjustable Pressure: 0.99 MPa
- Ensured Pressure Resistance: 1.5 MPa
- Operating Temperature Range: 5℃-60℃
- Filter Grade: 40 µ
- Capacity of Body: 15 cc
- Gauge caliber: G1 / 8
- Material: Metal, plastic
- Discharge water automatically
- Lightweight, small size, easy installation, and maintenance.