XB NEMA 23 (57mm) Coupling 8×9.5mm
Features:
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Large Bore Diameter: 9.5mm
- Small Bore Diameter: 8mm
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.
MMA845 module digital triaxial accelerometer precision tilt 3-axis
Features:
- Power Supply: 3v-5V.
- Pitch: 15mm.
- Mounting hole diameter: 3mm.
- IIC digital output.
- Up to two interruption functions.
- ±2 g/±4 g/±8 g dynamically selectable full scale
- Three motion detection channels.
- Freefall down or motion detection.
- Automatic ODR change for auto-wake and return to sleep
- Pulse detection.
1.44 red serial LCD display module 128*128 tft color screen PCB adapter
Features:
- Display Size: 1.44″
- Driver IC: ST7735
- Input Voltage: 3.3V to 5V
- Resolution:128×128 color pixels
- Touch Screen: NO
- Interface Type: SPI
- TFT color screen, the effect is far better than other small CSTN screen
- Fully compatible and alternative 5110 interface.
XL4015 MODULE WITH POT I/P:- 5V-38V O/P:- 1.25V-32V / 5A
Features
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 ~ + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
4 Wire Resistive Touch Screen MUX BREAK OUT BOARD
Features
| Brand | Graylogix |
| Model | Resistive Touch Screen |
| Item Weight | 100 g |
| Product Dimensions | 10.2 x 7.6 x 5.1 cm |
| Item model number | Resistive Touch Screen |
| Compatible Devices | Aurdino, 8051, PIC, AVR, Raspberry PI and all other Microcontrollers. |
| Included Components | Fargo Maestro 20 GSM/GPRS Modem, Power Connector, Serial Cable and Antenna` |
| Number Of Items | 1 |
Offside 60 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 60 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 5 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 5 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 30 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 30 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 200 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 200 RPM (at 12V) |
| Shaft length (mm) | 16 |
MQ3 module
Features
- Power: 2.5V ~ 5.0V
- Dimension: 40.0mm * 21.0mm
- Mounting holes size: 2.0mm
- Boost Converter Chip: PT1301
IR Sensor Array of 8
Features
- Power: 3.3 – 5V
- Detector spacing: 16mm
- Mounting holes size: 3mm
- Detection range: 1 – 5cm
Flex Sensor 2.2”
Features
- Flex length: 5.6 cm.
- Total Length: 2.2″ (7 cm).
- Life Cycle : >1 million.
- Height : 0.43mm (0.017″),
- Flat Resistance: 10K Ohms ±30%.
- Power Rating: 0.5 Watts.
300 mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut PR35
The 300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.
It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.
Dual Channel Digital Stereo Power Amp Module
Features:-
- Original TDA7297 core technology
- Easy Plug and Play Operation
- Dynamic operating Voltage Range: 8 to 16V
- High fidelity Dual 15W output.
MR.RC 12A ESC
Features
- LiPo Battery Input: 1 – 3S.
- Continuous Current: 12A.
- Burst Current(10S): 15A.
- BEC Mode: Linear.
- BEC Output: 1A/5V.
ECG Sensor Module – AD8232
Features
- Operating Voltage – 3.3V
- Analog Output
- Leads-Off Detection
- Shutdown Pin
- LED Indicator
- 3.5mm Jack for Biomedical Pad Connection or Use 3 pin header
Simonk ESC 30A
Features
- Model: SIMONK 30A.
- Constant Current: 30A (Max 40A < 10 sec).
- BEC: 5V 2A.
- Suitable Batteries: 2-3S LiPo.
YHDC SCT013-000 100A Switching Type Current Transformer
Features
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Meet UL94-V0 flame retardant properties
128/64 (Green)
Features
- Easy To Use
- Works with Most Microcontrollers
- Built-in Controller (KS0108B)
- 5V Power Supply
- 1/64 Duty Cycle
- Built-in Backlight
- Ideal for Moving Displays & Graphics
- Good Value for money
Solid state relay SSR-40DD 40A 3-32V DC to 5-60V DC SSR 40DD relay solid state
Features:
- Items: Solid State Relay.
- Model: SSR-40 DD.
- Input voltage: 3-32VDC.
- Output voltage: 5-60VDC.
- Output current: 40A.
- On voltage: ?1V.
- One-off Time: ?10ms.
- Off leakage Current: ?2mA.
- Weight: 0.106kg.
Hi-link HLK-5M03 100-240 VAC to 5 VDC/3W Power Supply Module
Features:
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- Rated input voltage 100-240 VAc
- Input voltage range 90-264 VAc
- Maximum input current: 0.2 A
- Input current surge: 10 A
- Maximum Input voltage: 270 VAc
- Enter slow start:50 mS
- Input Low Voltage Efficiency Vin=110VAc,Output full-load?69 %
- Input High Voltage Efficiency Vin=220VAc,output full-load?70 %
- Long-term reliability: MTBF 100000h.
offside 24v 30 rpm
Features
- Voltage ? 18v-30v
- RPM – 30 (at 24v)
- Nominal Voltage – 24v
- No- Load Current – 35mA
- Full Load Current – 800mA
- Full (Stall) Load Torque – 20 kgcm
JF-0630B DC 24 V 300mA 10mm 6N Push Pull Solenoid Electromagnet
Features:-
- Model: DC 24V 10mm 0.3N
- Rated Operating Voltage (VDC): 24
- Operation Mode: Push-Pull (Normally Closed)
- Holding Force: 0.3 N
- Weight:43 gm.
12V Electronics Solenoid Lock
Features
- Holding force: 0.25 kg
- Energized forms: intermittent
- Unlocking time: 1s
- Dimensions: 54 x 42 x 28 mm (LxWxH)
- High quality ultra-compact electric lock.
Xbee Base Board USB Output
Features:
- Compatible with all ZigBee modules (Series 1 and Series 2.5, standard and Pro)
- The built-in 3V3 Voltage regulator
- Onboard 3V3 <->5V level converter (easy to interface 5V Devices)
- Status LEDs ( RX,TX,RSSI,Power)
- Zig Bee Pins available at 2.54 mm berg strip
- All XBee pins are broken out.
- Reset button.
Johnson B 1000 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 1000 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 1 |
| Stall Torque(Kg-Cm) | 4 |
| No-Load Current | 200 mA |
Johnson B 100 rpm
Features
Power Supply: 12V DC
RPM: 100
Rated Torque: 5.7 Kg-cm
6mm Dia shaft with M3 thread hole
Gearbox diameter: 37 mm
Motor Diameter: 28.5 mm
Length without shaft: 63 mm
A2212 China Motor 2200KV
Features
- Model: A2212/6T
- Motor KV: 2200
- Max. Efficiency Current: 4-10A
- No Load Current: 0.5A @10V
- Current Capacity: 12A/60S
- LiPO Batteries: 2S-3S
GP2Y0A21YK0F 10-80cm
Features
- Distance measuring range: 10 cm to 80 cm
- Output type: Analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
- Update period: 38 ± 10 ms
1 or 4 Inch Keyless Drill Bit Chuck Hex Shank Adapter Converter Quick Change
Features
- Material: ABS
- Colour: Black
- Input power supply voltage: 6V-30V DC
- Output current: rated current 5A (maximum 8A, can not be extended)
- PWM frequency: 13kHz
- Duty cycle adjustable: 0%-100%
- Adjustable speed range: 0%-100%
- Fine workmanship and good performance.
- Digital display for duty ratio input
- Easy to use.
- Long service life.
8 Channel Tracking Sensor Module Board Trace Module Infrared Detection
Features:
- Operating voltage: 5.0 V.
- Supply current: 100 mA.
- Output format: 8 Analog and Digital voltages.
- Output voltage range: 0 V to supplied voltage.
- Optimal sensing distance: 0.125? (3 mm).
- Applications Line Follower Robots Object Array Sensing.
NODMCU Esp8266-12 USB CH340
Feature
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Power input: 4.5V to 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Integrated TCP/IP protocol stack
- Use CH340G to replace the CP2102.
Mini Electric Drill Chuck 0.3-4mm Jto Taper-Mounted Lathe PCB Drill Press for Motor Shaft Connecting Rod 3.17mm
Features:-
- Color: as picture.
- Material: High Carbon Steel.
- outside diameter: 21.5mm.
- Taper: 2 degrees 49 minutes 24.7 seconds.
- work with 0.3mm-4mm (0.01 “”-0.16″”) Drilling Rigs.
- the maximum tightening: 4.2mm.
- Connection size: JT0 (inner hole diameter is 6mm).
- JT0 larger diameter final cone: 6.350mm.
- JT0 cone Smallest diameter end: 5,800mm.
- 3.17mm Brass Mini Electric Motor Shaft.
Force Sensor 39.1MM
Features
- Easily customizable to a wide range of sizes
- Cost-effective
- Ultra-thin; 0.45 mm
- Robust; up to 10 million actuations
- Simple and easy to Integrate.
Servo Motor Tester
Features
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
Johnson B 30 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 30 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 10 |
| Stall Torque(Kg-Cm) | 18 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
| Shaft Diameter (mm) | 6 |