Offside 60 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 60 RPM (at 12V) |
| Shaft length (mm) | 16 |
4 Wire Resistive Touch Screen MUX BREAK OUT BOARD
Features
| Brand | Graylogix |
| Model | Resistive Touch Screen |
| Item Weight | 100 g |
| Product Dimensions | 10.2 x 7.6 x 5.1 cm |
| Item model number | Resistive Touch Screen |
| Compatible Devices | Aurdino, 8051, PIC, AVR, Raspberry PI and all other Microcontrollers. |
| Included Components | Fargo Maestro 20 GSM/GPRS Modem, Power Connector, Serial Cable and Antenna` |
| Number Of Items | 1 |
XL4015 MODULE WITH POT I/P:- 5V-38V O/P:- 1.25V-32V / 5A
Features
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 ~ + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
1.44 red serial LCD display module 128*128 tft color screen PCB adapter
Features:
- Display Size: 1.44″
- Driver IC: ST7735
- Input Voltage: 3.3V to 5V
- Resolution:128×128 color pixels
- Touch Screen: NO
- Interface Type: SPI
- TFT color screen, the effect is far better than other small CSTN screen
- Fully compatible and alternative 5110 interface.
MMA845 module digital triaxial accelerometer precision tilt 3-axis
Features:
- Power Supply: 3v-5V.
- Pitch: 15mm.
- Mounting hole diameter: 3mm.
- IIC digital output.
- Up to two interruption functions.
- ±2 g/±4 g/±8 g dynamically selectable full scale
- Three motion detection channels.
- Freefall down or motion detection.
- Automatic ODR change for auto-wake and return to sleep
- Pulse detection.
XB NEMA 23 (57mm) Coupling 8×9.5mm
Features:
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Large Bore Diameter: 9.5mm
- Small Bore Diameter: 8mm
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.
MAX30102 Heart Rate Oxygen Pulse Breakout Sensor Module For Arduino
Features:-
- Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End
- Optical Heart-Rate Monitor and Pulse Oximetry Solution
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- Tiny 12.7mm x 12.7mm (0.5in x 0.5in) Board Size
- Highly integrated, small-size sensor
- Non-chest based heart-rate/SpO2 detection
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings.
Floating Straight Automatic Water Level Control For Water Tank-14014449MG
Features:-
- Automatic Control, Low Self-Complementary Water, Water Full Automatic Stop.
- Four Intakes, Large Volume Of Water.
- Beautiful Appearance, Small Size, Practical, Simple Installation.
- Without Electricity, Easy To Use, Long Life, Low Failure Rate, Saving Water Resources.
- Working Pressure Range: 0.2-10Kg.
- Applicable Medium: Clean Water.
- Applicable Medium Temperature: ≤70degree C.
Thumb Throttle with Battery Indicator, Power lock key & Ignition – BE0304
Features:-
- Item Type: E-Bike Voltage Display
- Material: Plastic
- Color: As Picture Shown
- Model: (5V-99V Automatic Identification of Electric Vehicle Voltage)
- Efficiency: 98% or Higher Hall
- Grade: Linear Hall High-Quality Rubber Imported LED Digital Display Lamp Working
- Voltage: Turn DC0.8V-4.2V Power
- Display:12V, 24V, 36V, 48V, 60V, 72VÂ
- Length: 1.5m.
Thumb Throttle with Battery Indicator, Power lock key & Ignition – BE0305
Features:-
- Item Type: E-Bike Voltage Display
- Material: Plastic
- Color: As Picture Shown
- Model: (5V-99V Automatic Identification of Electric Vehicle Voltage)
- Efficiency: 98% or Higher Hall
- Grade: Linear Hall High-Quality Rubber Imported LED Digital Display Lamp Working
- Voltage: Turn DC0.8V-4.2V Power
- Display:12V, 24V, 36V, 48V, 60V, 72VÂ
- Length: 1.5m.
Pack of 50 pcs Standard Metal Hss Twist Drill Bits Straigth Shank
Features:-
- Model: Twist Drill Bit
- Surface Treatment: Titanium Coating
- Design: straight shank
- Material: HSS
- Size: 1mm*34mm, 1.5mm*38mm, 2mm*45mm, 2.5mm*55mm, 3.0mm*65mm
- Suitable for wood, aluminium, plastic.
- Straight shank design is more suitable for many electric drills sharp and twisted flute will make the drilling be more easy and effortless.
6pcs Hss Titanium Mane Drill Tap Combination Bit Tapping Deburring Countersink Set Metric 1/4 Hex Spiral Screw Tap
Features:-
- Type: Center Drill Bit
- DIY Supplies: Woodworking
- Material: High Speed Steel
- Use: Wood Drilling,
- Shank: 1/4″ (6.35mm) hex shank
- Size: 3.175mm, 3.97mm, 4.76mm, 6.35mm, 7.94mm, 9.53mm.
- Complete Hole Drilling
- Tapping And Deburring/Countersinking In One Operation With Power Drill
- Saves labour cost and time.
Pro Micro 5V 16M Mini Microcontroller Development Board For Arduino
Features:-
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection.
A3967 Stepper Driver
Features
- Power supply: 7V to 30V.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
- Logic voltage: 5V or 3.3V.
- A3967 microstepping driver.
A2212 China Motor 1000KV
Features
- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
3 Pieces 1 or 4 Inch Hex 12, 16, 19 mm Countersink Power Drill Bit Bore Set for Wood Metal
Features:-
- Suitable for all hand and power drills
- Contains all popular sizes of countersink bits
- Suitable for hardness lower material, such as wood
- 5 Flutes chamfering device Drill bit
- Shank: 1/4″ Hex
- Material: HSS
- Surface treatment: Titanium
- Length: 6.35mm (1/4”)
- Suitable for all Woods and Soft Metals.
GP2Y0A02YK0F 20-150cm
Features
- Distance measuring range: 20 cm to 150 cm (8″ to 60″)
- Output type: Analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
- Update period: 38 ± 10 ms
DIY Smart RC Line Tracker Following Robot Car Tracking kit STEAM Educational Programmable – IR Sensor Based Line Follower Complete Kit
Features:-
- Easy to Assemble
- Operating Voltage: 3V
- Line Map included
- Battery is not included
6v 300mA
Features
- Max output power: 3.23W
- Max working voltage: 6.6V
- Max charging current: 490mA
- Min output power: 2.7W
- Min working voltage: 6V
- Min charging current: 450mA
- Small Epoxy Solar Panels are simple to install or add to your existing product
- Construction requires no frame or special modifications
- Small space required for installation.
- Has 2 to 3 times the power of amorphous thin-film solar panels
- Ready to use, they require no frame or special modifications.
- For connection, just solder or crimp to the copper tape.
9v 200ma
Features
- Quality custom-design solar energy panel
- The solar cells are encased and protected by a durable outer poly frame
- Polycrystalline solar cells
- Max output power: 1.8W
- Max power voltage: 9V
- Max power current: 200mA
- Open circuit voltage: 10.8v
- Short circuit current: 220mA
- Small Epoxy Solar Panels are simple to install or add to your existing product.
- Construction requires no frame or special modifications
- Small space required for installation.
Solid Relay Module 2 channel 5v low level trigger for Arduino
Features:
- 5V Solid State 2-channel Relay
- Output With resistive fuse 240V 2A.
- Input Power: 5V DC (160MA).
- Input control signal voltage: 0 – 2.5V state low relay OFF/3.3V – 5V state high relay ON
- Working current: 12.5mA.
- Trigger voltage: 2.5v
- Trigger current: 2mA.
- Rated output load: 100V to 240V AC (50Hz/ 60Hz) 2A per channel
- Rated input power: 5V, 160mA (all channels ON)
- Triggered at Low level (or Active Low)
- Separate LEDs showing the status of each Solid-State Relay
- Input control signal:
- -Low Signal (Solid-State Relay ON / CLOSE), 0V- 2V or GND
- -High Signal (Solid-State Relay OFF / OPEN), 3.3V – 5.0V or leave it floating
AC 80 300V LCD Digital Volt Meter Voltmeter Eu Plug Electric Pen Meters
Features:-
- Plug-in digital voltmeter is widely used in AC80-300V detectio
- It is important for you to let the children away from the product.
- Suitable for measuring the AC voltage in many place, such as office, factory, laboratory, household and so on.
- Package List: 1 * DM55-1 AC 80-300V US Plug LCD Digital Volt Meter
Johnson A 10 rpm
Features
- Base Motor RPM: 18000
- Operating Voltage: 6-18 V
- Rated Voltage: 12 V
- Rated Torque: 472.6 N-cm
- Stall Torque: 2250 N-cm
- Gearbox Dimensions: 29×37 (LxW) mm
Solid Relay Module 4 channel 5v low level trigger for Arduino
Features:
- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac.
GP2Y0A41SK0F 4-30cm
Features
- Distance measuring range: 4 cm to 30 cm
- Output type: Analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
- Update period: 38 ± 10 ms
QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V Two Channel
Features:-
- Supports multiple fast charging protocols.
- Input over-voltage, over current, under-voltage protection.
- Output overcurrent, short circuit protection
- Module over-temperature protection.
- Long lifespan.
- Used to charge solar mobile phone, car charging retrofit, driving recorder power supply, home power conversion, etc.
Ultrasonic module waterproof
Features
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
Offside 100 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 100 RPM (at 12V) |
| Shaft length (mm) | 16 |
Offside 300 rpm
Features
| Operating voltage (v) | 3V to 12V |
| Nominal Voltage | 12V |
| No load Current (mA) | <20 |
| Full load current (mA) | <800 |
| Rated Torque (N-cm) | 10 |
| Rated speed | 300 RPM (at 12V) |
| Shaft length (mm) | 16 |
Johnson B 500 rpm
Features
| Rated Base Motor RPM | 18000 |
| Gear Material | Metal |
| Rated RPM | 500 |
| Operating Voltage(VDC) | 6 to 18 |
| Nominal Voltage (V) | 12 |
| Rated Torque(kg-cm) | 2.5 |
| Stall Torque(Kg-Cm) | 8 |
| No-Load Current | 200 mA |
| Load Current(A) | 700 mA |
offside 24v 75 rpm
Features
- Voltage – 18v-30v
- RPM – 75 (at 24v)
- Nominal Voltage – 24v
- No- Load Current – 35mA
- Full Load Current – 800mA
- Full (Stall) Load Torque – 10 kgcm
Wireless Module HLK – M35
Feature
- Device Dimensions: 16.3mm x 14mm x 2.24mm
- 2.4GHz 802.11b/g/n,compatible
- WiFi Sta/Soft AP Mode
- Support Smart Connection
- The range of baudrate: 1200~115200bps
- Support transparent transmission mode
- Support multiple security authenti-cation mechanisms: WEP64/WEP128/ TKIP/ AES, WEP/WPA-PSK/WPA2-PSK
- Support wireless roam
- Support multiple network protocols: TCP/UDP/ /DHCP/DNS
- Support AT instruction Set.
ISD1760 MODULE (75 SEC)
Features
- On-board ISD1760 chip
- Operating voltage: 5v
- 75 sec of audio playback
- Onboard microphone for direct recording
- Frequency: 6KHz or 8KHz
- Recording time: 6K/75 sec, 8K/60 sec
- Output all pin for chip control
- Easy interface with microcontrollers using 2.54mm spaced male pin headers
- High-quality natural voice reduction
- LED status indication
MQ135
Features
- Power:2.5V ~ 5.0V
- Detecting Range: 10ppm-300ppm NH3 ,10ppm-1000ppm Benzene,10ppm-300ppm Alcohol
- Relative humidity:<95%RH
- Dimension: 40.0mm * 21.0mm
3 Pieces Hss Steel Step Cone Drill Titanium Bit Set Hole Cutter Triangular Shank
Features:-
- Surface treatment: Titanium plating
- Set of 3 for jobs of all sizes.
- 2 fluted edges for faster, smoother cutting.
- 3 sided shanks prevent slippage when in the chuck.
- Made from high-quality HSS steel.
- Quantity: 1 set (3pcs).
XB NEMA 23 (57mm) Coupling 6.35x8mm
Features:
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Large Bore Diameter: 8mm
- Small Bore Diameter: 6.35mm
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.