Controller for BM1418ZXF 48V 350W Controller for Brushless DC Motor
Features:
- Rated Output Power – 350W
- Rated Voltage – 48V
- DC Speed after Reduction – 480
- RPM Rated Speed – 2800
- RPM Gear Ratio – 1:6
- Full Load Current – 9.4A
- No Load Current – 2.8A
- Rated Torque – 7.2 N.m.
- Application – Small and Medium size E-Tricycle.
Unite MY6812 24VDC 150W, 2750 RPM Electric Motor (Chain)
Features:
- Voltage: 24v
- No-Load Current: 1A
- RPM: 3500
- Torque: 0.56Nm
- Loaded RPM: 2600-3000
- Wattage: 150W
- Rated Current: 14.3A.
- Efficiency: 70%
- Weight: 1.4Kgs
- 11 tooth sprocket for #25 chain.
DC 48V 500W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle
Features:
- Rated Operating Voltage: 48V DC.
- Rated Power: 750W.
- Rated Speed: 2800 RPM.
- No Load Speed: 3100 RPM.
- Full Load Current: 13.4A.
- No Load Current: 4.0A.
- Rated Torque: 1.7N.m.
- Efficiency: >75%.
- Gear Speed: 400 RPM.
- Gear Torque: 10N.m.
- Gear Ratio: 6:1.
UNITE DC 48V 750W BM1418ZXF brushless gear motor
Features:
- Rated Output Power: 750W
- Rated Voltage: 48V DC
- Speed after Reduction: 480 RPM
- Rated Speed: 2800 RPM
- Gear Ratio: 1:6
- Full Load Current: 20A
- No Load Current: 5A
- Rated Torque: 15.36 N.m
- Load Capacity: Upto 350 KG.
- Motor Dimension : 24 x 14x 14cm
- Application – Small and Medium size E-Tricyc.
UNITE DC 48V 350W BM1418ZXF brushless gear motor
Features:
- Model: BM1418ZXF.
- Rated Output Power: 350W.
- Rated Voltage: 48V DC.
- Speed after Reduction: 480 RPM.
- Rated Speed: 2800 RPM.
- Gear Ratio: 1:6.
- Full Load Current: 9.4A.
- No Load Current: 2.8A.
- Rated Torque: 7.2 N.m.
- Phase Angle : 120 degrees
- Application: Small and Medium size E-Tricycle.
Combo Kit – MY1016Z3 350W Motor DIY Ebike, Electric Bicycle Kit
Features:
MY1016Z3 350W Motor:
- Voltage: 24 volts DC
- Output: 350 watt
- Left or right rotation by reversing wires
- MY1016Z3 motor with gear reduction
- 300 RPM (after Reduction)
Motor Controller Specifications:
- Dimensions: 83 x 70 x 38 mm(LxWxH)
- Cables length: 10 CM(Approx.)
- Weight: 196 gm
- Rated voltage: 24 v DC
- Current limit: 33A
- Rated power: 350 w
- Matching motor: dc brushed motor
- Under Voltage Protection: 20V
- Strong Aluminium body
BF-555 Gear / Geared Motor 60 RPM – High Torque
Features:
- Rated Voltage:12v
- RPM: 60 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 110 mA
- Load Current: 450 mA
- Stall Current: 1.8 A
- Full (Stall) Load Torque: 30 kg cm
- Weight: 500g Approx.
BF-555 Gear / Geared Motor 18 RPM – High Torque
Features:
- Rated Voltage: 12v
- RPM: 18 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 220 mA
- Load Current: 800 mA
- Stall Current: 3 A
- Full (Stall) Load Torque: 60 kg-cm
- Weight: 500g Approx.
BF-555 Gear / Geared Motor 6 RPM – High Torque
Features:
- Rated Voltage: 12v
- RPM: 6 (at 12v)
- Nominal Voltage: 12v
- No- Load Current: 110 mA
- Load Current: 450 mA
- Stall Current: 1.8 A
- Full (Stall) Load Torque: 90 kgcm
- Weight: 500g Approx.
Controller for 350W 36V Hub Motor – Electric Bike Bicycle
Features:
- Compatible Motor: Hub Motor
- Body Material: Aluminium
- Current Limit: 15 A
- Rated Voltage: 36 V
- Rated Power: 350 W.
350W 36V Electric Bike Bicycle Front Hub motor DIY Conversion Kit
Features:
- Rated Voltage: 36V
- No-load Current: 1A
- Rated Current: 14A
- Rated Power: 350W
- Speed: 328 RPM
- Rated Torque: 6N
- Compatible Wheel Size: 20 to 28 inch
- Spoke Holes: 36 holes
- Wheel diameter: 130mm.
350W 36V Hub Motor for Electric Bike Bicycle Front
Features:
- Rated Voltage: 36V
- No-load Current: 1A
- Rated Current: 14A
- Rated Power: 350W
- Speed: 328 RPM
- Colour: Black/Grey
- Compatible Wheel Size – 20 to 28 inch ;
- Spoke Holes: 36.
Leadshine DMA860E Stepper motor driver
Features:
- Model: DMA860E.
- Control Mode: Step & Direction.
- Max Input Frequency: 200 kHz.
- Input Voltage Range: 18 – 80 VAC / 24 – 110 VDC.
- Suggested Power Supply Voltage Range: 36-90 VDC /24-60 VAC.
- Number of DIP Switch Resolution Configurations: 16.
- 16 selectable micro-step resolutions of 400-51,200 via DIP switches.
- 8 selectable output current settings of 2.4 – 7.2A via DIP switches.
- Logic Current Range: 7-16mA (10mA typical).
- Logic Voltage Range: 4-5 VDC for pulse active high (default), or 0-0.5V for pulse active low.
- Pulse enabled at: Rising edge.
Wemos D1 Mini ESP8266 NodeMcu Easy WIFI board for Arduino Internet of Things
Features:
- Use BRT (Bias Resistor Transistor)
- Easier into flash mode.
- 30% increase in radiating area
- Good stability.
EMAX BLHELI 12Amp ESC for quadcopter / Drones
Features:
- Based on BL Heli firmware.
- ESC Type: Brushless.
- Built in linear or switched BEC.
- Constant Current: 12A
- Burst Current: 15A
- BEC Mode: Linear BEC : 5v / 1A
- Lipo Cells: 2-4
- Constant Current: 12A.
- Support: One-shot 125 Protocol.
- Includes low voltage protection, over heat protection, and self-check functions.
Dual Monster Moto Shield VNH2SP30 Motor Driver 2x14A (Peak 30A)
Features:
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
AVR-ISP 10Pin to 6pin Adapter PCB for USBASP Programmer
Features:
- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side: 6.
- Connector type on USBASP side: Male.
- Connector type on Device under programming side: Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
FlexiForce Tekscan A502 Sensor
Features:
- Thickness – 0.203 mm (0.008 in.).
- Length – 81.3 mm (3.20 in.)**.
- Width – 55.9 mm (2.20 in.).
- Sensing Area – 50.8 mm x 50.8 mm (2 in. x 2 in.).
- Connector – 2-pin Male Square Pin.
- Substrate – Polyester.
- Pin Spacing 2.54 mm (0.1 in.).
- Standard Force: 222 N.
- Temperature Range (Low): -40 °C.
- Temperature Range (High): 60 °C.
- Thin and flexible.
FlexiForce Tekscan A401 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
FlexiForce Tekscan A301 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter.
FlexiForce Tekscan A201 Sensor
Features:
- Thickness – 0.203 mm (0.008 in.).
- Length – 191 mm (7.5 in.)** (optional trimmed lengths: 152 mm (6 in.), 102 mm (4 in.), 51 mm (2 in.)).
- Width – 14 mm (0.55 in.).
- Sensing Area – 9.53 mm (0.375 in.) diameter.
- Connector – 3-pin Male Square Pin (center pin is inactive).
- Substrate – Polyester.
- Pin Spacing – 2.54 mm (0.1 in.).
- Standard Force Ranges – 445 N (0 – 100 lb).
- Temperature Range (Low) : -40 °C
- Temperature Range (High) : 60 °C
FlexiForce Tekscan A101 Sensor
Features:
- Testing and Measurement Equipment
- Embedded Electronics
- OEM Development Kit
- Consumer Electronics
- Multimeter
FEETECH FT6560M 65kg Large Scale High Torque Servo
Features:
- Model: FT6560M.
- Operating Speed6.0v 0.15 sec/60°.
- Operating Speed7.4v 0.13 sec/60°.
- Stall Torque 6.0v 48 kg.cm.
- Stall Torque 7.4v 62 kg.cm.
- Motor: carbon.
- Control Way: Digital.
- Cable Length: 20cm.
- Gear: 5 metal gears.
- Bearing: 2BB.
- Dead band: 4us.
FEETECH FS6535M 33KG High Torque Analog Servo FOR large scale big rc Robot – FS6535M
Features:
- Operating Voltage:4.8-6Volts
- Stalling torque: 27.5(kg-cm) @ 4.8V; 33(kg-cm) @ 6V.
- Stalling current: 3.8 A.
- No-load speed: 0.27±0.03(sec/60°).
- Direction: CCW.
- Operating Angle: 180degree.
- Required Pulse: 500us-2500us.
- Bearing Type: 2BB.
- Gear Type: Metal.
- Motor Type: Carbon.
FEETECH FT5335M 35kgcm Ultra-High-Torque, High-Voltage Digital Giant Servo
Features:
- Digital Giant Servo
- Ultra-high Torque, High voltage
- Speed @ 7.4V: 0.18 sec/60°
- Stall torque @ 7.4V: 40 kg.cm
- Speed @ 6V: 0.20 sec/60°
- Stall torque @ 6V: 35 kg.cm
- Lead length: 12 inch
- Servo horns and associated hardware are included
- Dimension: 62.8 × 32.5 × 55.9 mm.
- Weight: 180 g.
Stepper Motor NEMA 23 28 kg-cm Hybrid Bipolar
Features:
• Phase – 2 phase Bipolar
• Rated Voltage:4.8V
• Current/ phase: 3A
• Inductance/ phase: 7.5 mH (20% variance)
• Resistance/ phase: 1.6 Ohms (10% variance)
• Holding Torque: 28 kg-cm
• Number of Leads: 4
• Step Angle: 1.8°
• Step Angle Accuracy: ±5% (full step, no load)
• Resistance Accuracy: ±10%
• Inductance Accuracy: ±20%
• Frame Size: 85x85mm
• Shaft Length: 32mm
Stepper Motor NEMA 23 23 kg-cm Hybrid Bipolar
Features:
- Phase – 2 phase Bipolar
- Rated Voltage:2.55V
- Current/ phase: 3.5A
- Inductance/ phase: 2.8 mH (20% variance)
- Resistance/ phase: 0.73 Ohms (10% variance)
- Holding Torque: 23 kg-cm
- Number of Leads: 4
- Step Angle: 1.8°
- Step Angle Accuracy: ±5% (full step, no load)
- Resistance Accuracy: ±10%
- Inductance Accuracy: ±20%
- Frame Size: 85x85mm.
XB NEMA 34 (86mm-S) Coupling 12.7x8mm
Features:
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Large Bore Diameter: 12.7mm
- Small bore diameter:8mm
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.
- Suitable for Nema 23 Stepper Motor or for any motor/rod having an 12.75mm diameter
- Widely used in motors, stepper motors, encoders, and servo machines.
XB NEMA 34 (86mm) Coupling 12.7×12.7mm
Features:
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Bore Diameter: 12.7*12.7mm
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.
XB NEMA 23 (57mm) Coupling 6.35x8mm
Features:
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Large Bore Diameter: 8mm
- Small Bore Diameter: 6.35mm
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.
RB NEMA 23 (57mm) Coupling 6.35x8mm
Features:
- Material: Aluminium.
- Bore Diameter d1: 6.35 mm.
- Bore Diameter d2: 8 mm.
- Length: 25MM.
- Known as Beam coupling, helical coupling, Flexible coupling
- Quality assured branded couplings.
- It provides a good hold of the Motor Shaft.
- Ensure the safe operation of your robot.
- Weight: 128 gm.
XB NEMA 23 (57mm) Coupling 8×9.5mm
Features:
- Material: Aluminum alloy hubs and elastomeric polyurethane spider.
- Product Type: Clamp-style jaw coupling without keyway.
- Large Bore Diameter: 9.5mm
- Small Bore Diameter: 8mm
- Number of Screws: 2 each.
- Angular Misalignment: +/-1°.
- Parallel Misalignment: +0.20mm/-0.20mm .
- Maximum Rotational Speed: 6500RPM.
RB NEMA 17 (42mm) Coupling 5×6.35mm
Features:
- Material: Aluminium.
- Bore Diameter d1: 5 mm.
- Bore Diameter d2: 6.35 mm.
- Length: 25MM.
- Known as Beam coupling, helical coupling, Flexible coupling
- Quality assured branded couplings.
- It provides a good hold of the Motor Shaft.
- Ensure the safe operation of your robot.
- Weight: 128 gm.
5pcs x NFC Sticker tags 13.56MHz ISO14443A 25mm Ntag213 RFID NFC tag
Features:
- Chip: Ntag213.
- Physical capacity: 180 bytes.
- Usable capacity: 144 bytes.
- Protocol: ISO14443A.
- Working frequency: 13.56 MHZ.
- Reading and writing distance: 1 to 5 cm.
- Reading and writing time: 1 to 2 ms.
- Working temperature: -20 to 55 degrees, the humidity of 90%.
- Erase times : > 100000 times.
- Data storage: > 10 years.
- Reading time: 100000 times.
- Diameter: 25mm.
MMA845 module digital triaxial accelerometer precision tilt 3-axis (Copy)
Features:
- A d-type amplifier without a filter, low quiescent current, and low EMI.
- When connects with a 4-ohm load and 5V power supply, the output power can be up to 3W.
- Low THD, low noise.
- Short circuit protection; thermal protection.
MMA845 module digital triaxial accelerometer precision tilt 3-axis
Features:
- Power Supply: 3v-5V.
- Pitch: 15mm.
- Mounting hole diameter: 3mm.
- IIC digital output.
- Up to two interruption functions.
- ±2 g/±4 g/±8 g dynamically selectable full scale
- Three motion detection channels.
- Freefall down or motion detection.
- Automatic ODR change for auto-wake and return to sleep
- Pulse detection.