Square 100 rpm
Features
- Heavy Duty Metal Gears.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
Square 10 rpm
Features
- Heavy Duty Metal Gears.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
DM542 Digital Stepper Motor Driver with micro stepping 20 to 50V 4.2A
Features:-
- Power supply: DC 24-60 (V).
- Current maximum: 4.5A.
- Output phase current:1 .5A-4.5A.
- Logic input current: 1 0-20mA.
- Optical isolation signal input.
- Output current DIP switch is adjustable.
36MM Planetary Gear Motor 100 RPM 12v DC – High Torque
Features:
- Motor Type: DC Planetary Gear Motor
- Gear Material: Metal
- Motor Length: 57mm
- Shaft Length: 20mm
- Total Length: 100mm
- Gearbox Diameter: 36mm
- Motor Diameter: 36mm
- Shaft Diameter: 8mm
- Rated Voltage: 12V
- Reduction Ratio: 1:51
- No-load Speed: 117 RPM.
TDA7492P 50W Wireless Bluetooth 4.0 Audio Receiver with Digital Amplifier (Multicolor)
Features:-
- 25 W + 25 W continuous output power at THD = 10% with VCC= 20 V and RL= 8 Ω
- Wide-range single-supply operation (8 – 26 V)
- High efficiency (η = 90%)
- Four selectable, fixed gain settings of nominally 21.6 dB, 27.6 dB, 31.1 dB and 33.6 dB
- Differential inputs minimize common-mode noise
- Standby and mute features
- Short-circuit protection.
Tauren Gear series 100 – 30 rpm
Features
| Maximum Speed(RPM) | 30 (at 12V) |
| Rated Voltage | 12V |
| Nominal Voltage | 12V |
| Stall Torque(Kg-Cm) | 90 kgcm |
| No Load Current | 700 mA |
| Rated Load Current | 4 A |
| Stall Current | 14 A |
| Weight (gm) | 500 gram |
NEMA 23 10.1 kg-cm
Features
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
59TYD-375-2A AC Synchronous Motor 220VAC 50HZ – 1.6, 5, 12, 20, 40. RPM
Features:-
- RPM: 40.
- Torque: 5 kgcm.
- Voltage: 12-240 VAC.
- Input Power: <13W
- Max Output Torque: 68kgcm.
- Available RPM: 5, 8, 15, 20, 30, 60.
- Frequency: 50/60Hz.
- Rated Current: 100mA.
- Noise (dB): 42.
- Insulation Class: B.
AC 80 300V 100A Digital LCD Ampere Voltage Meter A mmeter Voltmeter White
Features
- Material: ABS
- Colour: White
- Voltage Measurement Range: AC 80-300V
- Current Measurement Range: AC 0-100.0A
- Power supply: < 0.2V*A
- Installation: Embedded installation
- Accuracy: 1% ± 2digit
- Measurement speed: about 2 times per second
- Display Type: LCD with blue backlight
- Operating Temperature: 10deg. C ~65deg. C
- Operating Humidity: 35~85 per cent RH
- Current Transformer: included.
YHDC SCT013-000 100A Switching Type Current Transformer
SCT-013-000 YHDC 100A Switching Type Current Transformer SCT013000
3.2 Inch Touch Screen Wave share
Features
- Version: V4.0
- Resistive touch.
- Dimension: 3.2 inch.
- Operating Voltage: DC 5V.
- Driver: XPT2046.
- Resolution: 240 x 320.
FlexiForce Tekscan A502 Sensor
Features:
- Thickness – 0.203 mm (0.008 in.).
- Length – 81.3 mm (3.20 in.)**.
- Width – 55.9 mm (2.20 in.).
- Sensing Area – 50.8 mm x 50.8 mm (2 in. x 2 in.).
- Connector – 2-pin Male Square Pin.
- Substrate – Polyester.
- Pin Spacing 2.54 mm (0.1 in.).
- Standard Force: 222 N.
- Temperature Range (Low): -40 °C.
- Temperature Range (High): 60 °C.
- Thin and flexible.
3.2 Inch Touch Screen
Features
- 3.2″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 240×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
Digital TPA3116D2 2.1 HIFI subwoofer amplifier board 50w+50w+100w Digital Audio Amplifier
Features:-
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- Powered by DC 12-24V, wide input voltage.
- User can adjust the volume by themselves easily.
- Applicable speaker impedance: 4-8 ohm.
DJI Mavic Mini Lower Body Shell
DJI Mavic Mini Lower Body Shell
A DJI PRODUCT
Lower Frame Shell for DJI Mavic Mini.
High quality, 100% original and new.
Package included: 1 X Lower Frame Shell for Mavic Mini
59TYD-375-2B AC Synchronous Motor 220VAC 50HZ – 5, 8, 15, 20, 30, 60. RPM
Features:-
- RPM: 30.
- Torque: 68 kgcm.
- Voltage: 12-240 VAC.
- Input Power: <13W.
- Frequency: 50/60Hz.
- Rated Current: 100mA.
- Noise (dB): 42.
- Insulation Class: B.
DIY 3DOF 3-Axis Control Palletizing Robot Arm Model with Servo Arm Plate (not including MG995 servo)
Features:
1. 3-DOF manipulator! Vertical arm up and down, back and forth.
2. U-type robot waist bracket on the arm can be mounted directly on the base in the car or any other desktop platform.
3. The vehicle type 3-DOF manipulator medium length, back and forth up and down, in which a mechanical claw opening and closing of the steering gear control, two servo control arm up and down back and forth.
4. This robot is particularly suitable as a vehicle manipulator robot car, grab the ball, catch the car are particularly good, very suitable for their own DIY or robotic smart car racing.
5. Activities can use 180 degree steering joints.
Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone
Features:
- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6 pin ISP header
- 2 independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections.
NEMA 23 7.2 kg-cm
Features
- Step Angle ( ° ): 1.8
- Motor Length (L)mm: 51
- Current/Phase A: 1
- No of Leads: No. 6
- Shaft type: Round.
MARSPOWER MX1806 2280KV BLDC Motor
Features
- VK: 2280
- Max thrust: 460g
- No of cells: 2-3S
- Framework: 12N14P
- Suitable Propeller: 5-6”
- Shaft: 2mm
- Minimum ESC Specification: 12A Suggested
- Durable with high quality
- The 0.2mm core to lower load temperature and increase efficiency
- Range of use for DJI F330 ZMR250 H250
- Do every single motor balancing test
- Japan NMB bearings provide low noise and long life
- 2mm spindle selection of Kawasaki, Japan, more efficient, less heat
GP2Y0A710K0F 100-550cm
Features
- Distance measuring range: 100 cm to 550 cm
- Output type: Analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
- Update period: 38 ± 10 ms
Anti Spy Cell Phone Signal Bug Rf Camera Gsm Device Detector 2600Mhz
Features
- Colour: Black
- Detecting frequency: 100 – 2600mhz
- Effective range: 1-10m (32 – 32ft)
- Detect the harmful electromagnetic radiation
- Detect if there is more secret 5. 8 Ghz wireless web camera, wireless wiretap, and wire monitor.
- Ensure the privacy of your phone conversations up to a great extent
- Prevents eavesdropping, videotaping, fraud, protect personal privacy data and information confidential
- Dimensions:6*5*5cm
- Weight: 400gm.
HLK-RM04 Uart WIFI with External Antenna
Features:
- 2.4GHz 802.11b/g/n,compatible
- Support IEEE 802.3、IEEE 802.3u
- WiFi Client/AP/Router Mode
- Support WPS/WDS
- The range of baudrate: 1200~500000bps.
Tauren Gear series 100 – 600 rpm
Features
- Rated Voltage – 12v
- RPM – 600 (at 12v)
- Nominal Voltage – 12v
- No- Load Current – 700 mA
- Load Current – 4 A
- Stall Current – 14 A
- Full (Stall) Load Torque – 14 kgcm
- Weight – 500g Approx
Tauren Gear series 100 – 300 rpm
Features
| Maximum Speed(RPM) | 300 (at 12V) |
| Rated Voltage | 12V |
| Nominal Voltage | 12V |
| Stall Torque(Kg-Cm) | 14 kgcm |
| No Load Current | 700 mA |
| Rated Load Current | 4 A |
| Stall Current | 14 A |
| Weight (gm) | 500 gram |
5V-12V DC Brushless Motor Driver Board Controller
Features:
- Drive voltage: DC 5-l2V
- Work current: ≤ 1.2A
- Speed range: from 0% to 100%
- Phase inversion Control: Yes
- Voltage polarity protection: Yes.
3.5” TFT for Raspberry PI
Features
- LCD Type: TFT.
- Touch Screen Type: Resistive Screen.
- Backlight: Yes, LED.
- Resolution (Pixel): 320 x 480.
- Aspect Ratio: 8:5.
- Touch Controller: XPT2046.
MPU-9250 GY-9250 9-Axis Sensor Module I2C/SPI Communications Thriaxis gyroscope and accelerometer, magnetic field.
Features:-
- Accelerometer, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules.
SIM900A V4.0 Kit Wireless Extension Module Antenna Tested GSM GPRS Board 5V
Features:-
- supports CSD, USSD, SMS, FAX
- Supports MIC and Audio Input
- Speaker Input
- Features keypad interface
- Features display interface
- Features Real-Time Clock
- Supports UART interface
- Supports a single SIM card
- Firmware upgrade by debug port
- Communication by using AT commands.
4-wheel Robot Smart Car Chassis Kits Car Model with Speed Encoder
Features:
- Operating Voltage: 3-6V VDC
- Gear Ratio: 1:48
- No-load speed(5V): about 200 RPM
- Rated Torque: 0.8 Kg.cm @ 5V
- Load current: 170mA (when it is 4.5V)
- Shaft Length: 10 mm
- Shaft Type: 6 mm, Double-D
- Loading Capacity: Max 2.5Kg
- Wheel Diameter: 65 mm
- Wheel Width: 27 mm
- Body Material: Plastic
- Grip Material: Rubber.
Planetary 45 rpm
Features
- RPM – 45
- Rated Voltage – 12 V DC
- No Load Current – 600 mA
- Full Load Current – 14A
- Stall Torque – 90 kgcm
- Number of Gear Trains – 3
- Base Motor RPM – 5000
Xbee Module S2C XBP24CZ7UIT-004
Features:
- Protocol: ZigBee
- Modulation: DSSS
- Frequency: 2.4GHz
- Data Rate: 1Mbps
- Power: Output 18dBm
- Sensitivity: 101dBm
- Serial Interfaces: SPI, UART
- Antenna Type: Antenna Not Included, U.FL
- Transceiver chipset: Silicon Labs EM357 SoC
- Operating voltage: 2.7V-3.6V
- Current Receiving: 31mA ~ 45mA.
Ethernet Shield
Features
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Compatible with the for Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560)
Flysky (only receiver)
Features
- No. of Channel: 6
- RF power: less than 20DBm
- modulation: GFSK
- Code type: PCM
- Sensitivity: 1024
- Low voltage warning: LED
Metal mechanical Arm Gripper claw
Features:
- The degree of Freedom (DOF): 2
- Paw material: aluminum alloy
- Paw weight: about 68g (without motor)
- Claws overall length: 108mm (overall maximum length when closed paw)
- Claws overall width: 98mm (maximum overall width of the paw when open)
- Paw maximum opening angle: 55mm.
