Flame Sensor
Features
- Spectrum range: 760nm ~ 1100nm
- Detection angle: 0 – 60 degree
- Power: 3.3V ~ 5.3V
- Operating temperature: -25℃ ~ 85℃
- Dimension: 27.3mm * 15.4mm
- Mounting holes size: 2.0mm
MPU6050 6AXIS
Features
- Acceleration and Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 6 DOF modules
16/2 Orange
Features
- Input voltage: 4.7V TO 5.3V
- Operating voltage: 5V
- Current consumption is 1mA without backlight
- Consist of 2 rows and each row can print 16 characters
- Can display alphabets and numbers, i.e. alphanumeric
- Viewing area: 99*24mm
- Character size: 5.2*9.55mm
- Each character build by5*8 pixels
- Works on both 8 bit and 4 bit
9v 100mA
Features
- Quality custom-design solar energy panel
- The solar cells are encased and protected by a durable outer poly frame
- Polycrystalline solar cells
- Max output power: 1.08W
- Max working voltage: 9.9V
- Max charging current: 110mA
- Min output power: 0.9W
- Min working voltage: 9V
- Min charging current: 100mA.
Wall Mount Sound Security Light Delay Sensor Control Lamp Switch Ac 220V
Features
- Operating voltage: 220v
- Load Power: 30w
- Sound Control Sensitivity: 95db- 75db
- Light Control Induction: 6lux
- Delay Time: 30 seconds
- High-quality Energy Saving Auto Switch Controlled by Light and Sound
- Ideal Light Switch for use around bathroom, hallways, staircases and porches
- Easy to install
- Load Type: Control energy-saving lamps under 80W,incandescent under 60W,LED light under 30W
- Installation: Shut off the power, load must not short-circuit.
MA-3485 Pocket 60x LED Currency Detecting Microscope
Features
- Light Source Type: LED
- Colour: Silver
- Material: ABS + Acrylic
- Lens Material: Glass
- Power Supply: 3* CR1620 Button
- Lens diameter: 10mm
- Magnification strength: 60x
- 2 x LED lights, 1 x UV light.
Double Analog Potentiometer Module With Slide Potentiometer Slip Adjustable Resistance For Arduino
Features:-
- Dual analogue output, output 0-VCC analogue voltage signal.
- Voltage: 3.3V, 5V.
- Port: Analog.
- Resistance: 10K.
- Slide potentiometers module
- Two analogue outputs, analogue outputs 0-VCC voltage signals
- Stable and reliable performance with high-quality sliding appliances
- Platform: Arduino, MCU, ARM, and other microcontroller platforms
- Application: Raspberry Pi projects, DIY projects, Arduino projects.
- Dimensions: 91 x 21 x 30 mm
- Weight: 18 gm.
2mm Pushrod (4 Pcs) For Landing Gear
2mm Pushrod ( 4 Pcs )
Thickness – 2mm
Length – 50cm (each)
FT-Explorer Power Pod Kit
Replacement / Spare Power POd kit for FT-Explorer
YF-S401 PVC Water Flow sensor
Features
- Operating Voltage: 5-12VDC
- Operating Current: 15mA
- Insulation Resistance >100MOhm
- Nozzle Size: 1/8.
N20 Gear motor RPM – 40
Features
| Model No. | N20-6V-400 |
| No Load Current (mA) | 0.04 A |
| Stall Current (A) | 0.67 |
| Stall Torque(Kg-Cm) | 0.65 |
| Rated Torque(kg-cm) | 0.18 |
| Motor Body Size (Diameter) (mm) | 12 |
| Operating Voltage (VDC) | 3 ~ 6 |
| Rated Operating Voltage (VDC) | 6 |
| No load Speed (RPM) | 400 |
ISD1820 MODULE (10 SEC)
Features
- Operating voltage: 2.6v to 5v
- Record and playback up to 10 sec
- Push-button and microcontroller controllable AGC circuit added tom increase audio playback volume
- Recording time: 8- 20 sec
- Built-in microphone
- On-chip 8-ohm speaker driver
- High quality, natural voice restored
- Available single-chip control audio recording control mode: the key to control or microcontroller, IO has drawn the line of control
- Can be used as propaganda module
- Auto power down mode
- Duration and sample rate can be extended to 20 sec by varying resistance
- Dimension: 43*34*11mm
Attiny 5 Version 2
Features
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The On – board, 150 ma 5 v Regulator.
- Built – in USB and serial was debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
IMAX B3 Charger
Features
- Input Voltage(AC): 100- 240v
- Battery Type: LiPo (Lithium Polymer)
- Balance Charge Current: 840mA
- Output Current: 3 x 800mA
- Power Plug: EU Plug or US Plug
- Dimensions: 92*59*35.5mm
- Case Material: ABS
Digital Voltmeter Ammeter DC 0-100V 10A Dual LED Monitor Panel, Red and Blue
Features:-
- Operating current: 10mA
- Operating voltage: DC 4.5 ~ 30V
- Minimum resolution(V): 0.1V
- Minimum resolution(A): 0.01A
- Display color: Red and Blue (two-color display)
- Measure accuracy: 1%.
Water Float Sensor P43
Features
- Contact Rating: 10W
- Switching Voltage: 100V
- Max Switching Voltage: 220V
- Switching Current: 0.5A
- Max Switching Current: 1.5A
MK8 extruder aluminum block DIY kit
Right Side MK8 extruder Aluminum 3D Printer Block
This is a high-quality MK8 Extruder Replacement Aluminum Alloy Block. Use it to replace your blocked/damaged extruder. This block comes in a kit form and requires assembly by the user. Since this is very popular numerous assembly instructions and videos are available on the internet which will help you build your extruder.
The MK8 Extruder is available in 3 different types – Right Side, Left Side and Right Short. These extruders differ in the direction in which the filament is extruded with respect to the extruder block. When using single extruders, any extruder can be used. When using dual extruders you can use one right side and one left side
RFID EM18 125KHz RS232 Output
Features
- Operating Voltage: 5V DC Supply
- Reading Distance: 6-10 cm.
- Read frequency: 125 kHz.
- EM4001 64 – bit RFID tag compatible.
- 9600bps ASCII output.
- Current : <50 mA
- Operating Frequency : 125 Khz
- Read Distance : 5 cm
- Compatible Tags : 125KHz EM4100 Tags
- Size : 32mm(length) * 32mm(width) * 8mm(height).
Hi-link HLK-5M12 100-240 VAC to 5 VDC/5W Power Supply Module
Features:
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test.
USB Charger Doctor Mobile Power Detector Battery Test Voltage Current Meter
Features:-
- Enabled to measure USB devices at no load and overload condition, also for USB terminals testing.
- Current and voltage display in turn, easy and comfortable to use.
- Small and portable, do not need other power supply.
- Measuring range: DC 3V – 9V / 0 – 3A (up to 5A )
- Portable Device
- Interface: USB2.0, USB3.0
- Product Weight: 0.025 kg
- Two output ports.
8 Channel Relay Module 5v
Features
- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
ESP-WROOM-32 universal WiFi-BT-BLE MCU module
Features:
- CPU and Memory: Xtensa® 32-bit LX6 Dual-core processor, up to 600 DMIPS.
- 448 KByte ROM
- 520 KByte SRAM
- 16 KByte SRAM in RTC.
- QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
- Supply Voltage: 3V~3.6V.
G3/4 Thread Water Flow Sensor Switch Control Meter Flowmeter 1-30L/min SEN-HZ43WB
Features:-
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
- Max current draw: 15mA @ 5V.
- Working Flow Rate: 1 to 30 Liters/Minute.
- Maximum water pressure: 2.0 MPa.
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
GPS Ublox Neo 6M TTL
Features:
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna..
6pin 128X64 OLED 0.96″-Blue
Features
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Display Color: Area Color (Blue)
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Only Need 2 I/O Port to Control
- Full Compatible with Arduino
- Working temperature: -30°C ~ 70°C
- Module volume ( generous ): 2.7 cm x 2.7 x 0.41 cm
12 x 18 cm size
Features
- Dimension: 12 x 18 cm
- Base Material: FR4
- Copper Thickness: 1-4 OZ
- Board Thickness: 1.6mm
- Min. Hole Size: 0.3mm
- Min. Line Width: 6mm
- Min. Line Spacing: 6mm
- Edge solder pads are on 5.08 (0.2″) centres
- Surface Finishing HASL, NC, and CNC for high solderibility
6045 propeller
Features
- Comes with thin and wide blades
- 6045(6×4.5) Propellers Black features epoxy resin cover.
- It comes with a set of plastic reducers (3, 3.17, 4, 4.70, 5, 6, 6.25 mm).
- Quick to release, quick to attach
- New design propellers, with greater aerodynamic efficiency, good lifting capacity.
N20 Gear motor RPM – 100
Features
- Voltage range:3-6V
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
8 CHANNEL
Features
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Channel: 8 channel
- Relay Operating Voltage: 5V
DC 12V KK-P25/20 5KG Lifting Solenoid Electromagnet
Features:-
- Operating Voltage: 12V DC
- Lifting Capacity: 8KG
- Size (D x L): 25 x 20 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC
Features:-
- Control Range: -50~110 °C
- Control Precision: 0.1 °C
- Measuring Input: NTC10K waterproof sensor L=0.5m.
- High-Temperature Alarm: -49~110 °C
- Input Voltage: DC 12V
- Output Type: Relay output 10A (max)
- Return Difference Setting: 0.1~30 °C
- Delay Starting: 0-10min
- Temperature Calibration: -10~10 °C.
CS 2000 rpm
Features
| Phase |
Single Phase
|
| Voltage |
12V
|
| Speed |
2000(RPM)
|
| Mounting |
NUT MOUNTING
|
| Application |
ROBOTICS
|
Minebea 16PU-M202 Bipolar Stepper Motor
Features
- Step angle 3.75 degree
- Phase current: 0.6 ampere
- Step Angle: 3.75 Degree +/- 5%
- Drive Sequence: Bipolar
- Rated Current per Winding: 0.6 A
- Winding Resistance: 5E5
- Holding Torque Nm (Kg-cm): 0.064 (0.65)
- Rotor Inertia (Kg-cm2): 0.015
- Rated Voltage: Max 40V DC, 12V Typical
- Flange Size: 56.5 mm.
Photo Control Sensor Automatic Street Light Lighting Switch Photocell Photoswitch
Features:-
- Input Voltage:220V AC
- Max Load Current: 10A
- Frequency: 50-60Hz
- Colour: White & Blue
- Intelligent Sensor Light Control Switch
- The light turns on in the dark and turn off in the daytime, an intelligent sensor, no need to operate by manual.
- Widely use in streets, high-speed expressways, factories, gardens, airports, farms, schools and other places.
- Dimension: 5 x 4.2 x 3.3cm.
Mitsumi R-14 A341 370 DC pump 6V 200mA Oxygen Pump Tank Motor
Features
- High-Quality Pump
- Operating Voltage 6VDC
- Low Noise Operation
- Durable and Longer Lasting
ESP8266 ESP-13
Features
- 32-bit RISC architecture
- The processor can operate at 80MHz / 160MHz
- 32MB flash memory
- 64kB for instructions
- 96kB for data
- Standard native WiFi 802.11b / g / n
- Operates in AP, Station or AP + Station mode.