Showing 1–36 of 1008 results

Show sidebar

TRAXXAS XRT (RED)

This is Traxxas XRT™ 8S 1/5 4WD Brushless RTR Electric Race Truck Blue Edition w/ 2.4GHz TQi Radio & TSM. The Traxxas XRT fuses race-inspired design and engineering with X-Maxx® power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed. XRT was engineered with a focus on speed, handling, and performance. XRT’s low center of gravity, ultra-wide stance and low-profile body deliver confidence and control as XRT accelerates across the wide-open spaces to an all-out speed of 60+MPH. XRT performance and durability begins with its all-metal 8s driveline. Steel 4-gear differentials and steel driveshafts are joined by a high-strength extruded aluminum center shaft. It’s a precision-engineered recipe that has been proven monster-truck tough in the X-Maxx. XRT’s performance-focused chassis design is configured to lower the center of gravity for superior handling and stability. The dual 6700 4s batteries and the steering servo are positioned to place the weight as low as possible in the chassis and provide protection for these critical components. XRT’s patent-pending clipless body easily removes and installs in just seconds and yet it locks in place with incredible strength and security. The system uses a cage inside the body to minimize flex while external skids are strategically placed to protect the body. XRT’s Gravix™ race tires are a revolutionary new hybrid design with densely packed biting edges and sipes. They deliver outstanding grip on hard-packed surfaces along with fast and quiet-running precision. Already Traxxas’ most powerful speed control, XRT’s VXL-8s™ goes even further with an aggressive tune that maximizes power output across the entire RPM range. More power under the curve delivers mid-range punch that hits hard for rolling wheelies on demand. Bury the throttle at any speed and XRT responds instantly with effortless acceleration.

135,700.00 Read more

Traxxas X-maxx (Rock and Roll)

Note – Select Flexible Shipping while Checkout / Confirm Before For Colour & Stock Availability

Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme 8S power, X-Maxx defies physics, unleashing jaw-dropping acceleration and 50+mph speeds. Engineered to conquer the most extreme terrain and take brutal real-world punishment in stride, X-Maxx is the definition of Traxxas Tough.

132,160.00 Read more

1/7 FELONY 6S BLX STREET BASH ALL-ROAD MUSCLE CAR RTR, ORANGE

The 1/7 scale ARRMA® FELONY™ 6S BLX Street Bash 4WD RTR brings retro mod style to the BLX platform. Fast and tough, it can reach 80+ MPH speeds out of the box over on-road, dirt and oval tracks — and includes telemetry-capable Spektrum® Smart electronics.

82,600.00 Read more

Traxxas TRX-4 Ford Bronco 2021 1/10 Electric RC Car

Traxxas TRX4 Ford Bronco 2021 Scale & Trail Crawler

After 25 years, the Bronco has returned as Ford’s top-performing 4X4 and Traxxas has captured the hot new Bronco in exacting detail with all the capability and versatility of the award-winning TRX-4. The Traxxas Bronco combines Ford-approved realism and class-leading performance for exciting off-road adventure no matter where the trail takes you. With a 3S LiPo compatible XL5 HV ESC and Titan 550 21T motor, the Bronco has plenty of torque to tackle the steepest inclines – and the system will run up to 2 hours on a Traxxas 3S 5000mAh LiPo pack!

79,060.00 Read more

TRAXXAS SLASH 4X4 ULTIMATE GREEN EDITION

Description:

The Traxxas Slash 4X4 “Ultimate” RTR 4WD Short Course Truck is fully loaded out of the box. The Slash Ultimate features brutal Velineon brushless power and Traxxas Stability Management (TSM) with a high-speed metal gear servo. Carve corners like a pro thanks to the low-CG chassis, installed sway bars, and ultra-smooth blue PTFE-coated aluminum GTR shocks. Slash 4X4 Ultimate packs a full complement of aluminum hop-up parts and performance accessories for added strength and show-stopping looks. Slash 4X4 Ultimate arrives fully assembled with factory-installed telemetry sensors and a Wireless Link equipped TQi 2.4GHz radio system. Simply add the battery of your choice (sold separately) and you’re ready for intense tire-scorching action.

68,440.00 Read more

Creality 3D CR-10S DIY 3D Printer Kit 300*300*400mm Printing Size With Z-axis Dual T Screw Rod Motor Filament Detector 1.75mm 0.4mm Nozzle

Features:-

1. It is the upgraded version of CR-10.
2. With Filament detector, can reduce accidents and avoid model printing interrupts.
3. With Dual lead screws with motor, more durable to use.
4. Use Industrial-grade PCB mainboard, more highly integrated modules, can continuously print for about 200 hours without pressure, with matures printing technology and stable performance.
5. Only take 10 minutes to install.
6. Use newest V-slot linear bearing system, brings high accuracy and low noise printing.

53,648.70 Read more

CAMPER 1:8 2.4G Gas Powered RC Car 4WD Off-road Buggy with 26CXP Nitro Engine RTR Parts HSP 94970

    • Powerful Performance: The SINC005 CAMPER 1:8 2.4G Gas Powered RC Car features a 26CXP nitro engine, enabling it to reach speeds of 70-80km/h, making it ideal for outdoor use and thrilling racing experiences.
    • Durable Construction: The RC car is made of high-quality metal and plastic materials, ensuring a robust and long-lasting design that can withstand the demands of off-road adventures.
    • Long-Range Control: With a control distance of 100-150m, users can enjoy a wide range of control over the RC car, allowing for exciting stunts and maneuvers.
    • Ready-to-Run: The product comes fully assembled and ready to use, eliminating the need for extensive setup or technical expertise, making it accessible to users of all skill levels.
    • Comprehensive Package: The package includes a remote controller, original box, operating instructions, and other essential components, providing users with a complete and hassle-free experience.
53,100.00 Add to cart

MJX H8H V2 All Rock Brushless 1:8th Scale Crawler Truck

MJX H8H V2 ALL ROCK 1:8 scale RC Crawler Climbing truck. Marketed as a climbing truck, the H8H is unique in that it can master both slow speed crawls and high speed pursuits (17mph+) with plenty of power available for on-demand wheelies.

The MJX H8H truck is absolutely packed with features with a IP67 rating for water and dust protection, remotely switchable high/low speed transmission, controllable LED lights and bluetooth/smart phone connectivity.

Driving control is aided by a 35KG steering servo, fully metal drive transmission, front and rear lockable differentials, high/low speed gears and a unique FOC vector control system providing absolute control of the magnetic encoded-sensing brushless motor system. Fully compatible with both 7.4v 2S and 11.1v 3S LiPo batteries with front and rear battery trays.

53,100.00 Read more

GOOSKY Legend S2 RC Helicopter Dual Brushless Motor Direct-Drive BNF/RTF Helicopter (Mode 2)

The GOOSKY Legend S2 is a game-changing, high-performance, innovative, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring you unmatched flying fun and excitement. It boasts a whole host of features including a flybarless head, dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique one-piece concave CNC bracket for the swashplate actuator system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the GOOSKY R&D team in producing a tough, exciting-to-fly, low-maintenance, high-performance helicopter, that is suitable for low-time and experienced pilots alike.

50,150.00 Add to cart

FMS FCX10 1/10th Land Cruiser LC80 RS Grey

The Ideal 1/10 Scale RC Car for Off-Road Adventures.

Authorized by Toyota, the 1/10 Land Cruiser 80 from FMS Models adopts the FCX10 crawler chassis, which faithfully provides the off-road performance
of the original car.

To ensure durability, the body is moulded in a PC material and is equipped with mirrors and waders. Through the transparent windows you can see a detailed driver figure, exquisite dashboard and cockpit interior. The roof is equipped with a luggage rack and four offroad lights, while a climbing ladder is mounted at the rear. The vehicle comes pre-installed with headlights, front turn signals, side turn signals, rear turn signals, reverse lights and other lighting components. The bodyshell uses a magnetic interface to draw power from the chassis, allowing the lights of the entire vehicle to be activated with a single button on the remote control. Additionally, we also have pre-installed fenders to keep mud from spilling onto the body and chassis.

The whole chassis adopts the mainstream middle front power layout with four-link sus-pension. The mid-front motor and transmission, as an integral unit, have a lower center of gravity compared to similar products, resulting in a lower roll centre and a reduced likelihood of rollovers. Meanwhile, metal-geared waterproof servos placed to the side of battery compartment are responsible for switching high and low speeds.

In terms of convenience and daily maintenance, FMS has given this good consideration. The battery compartment can be flipped back or “quick release”. The electronic equipment is concentrated within the middle of the chassis, providing convenient maintenance, removal or replacement. FMS have innovatively designed a knob-type quick re-lease structure, and at the same time, the power and signal cables of the lights are perfectly
integrated with the magnetic module.

Except for an adventurous heart, you don’t need to prepare anything, FMS will take you on your off-road journey!

42,480.00 Add to cart

2024 Yikong YK4106 PRO 1:10 RC Car Crawler 11CH Radio Tank Turing RTR

Description
Yikong 4106 Pro is a 1/10 RC crawler with an ability we have not yet seen in the RC crawling world. You may not have heard of Yikong before, but they’ve been quietly making some interesting models over 2023 and now 2024. This latest one is a model that combines the best features of the offerings of the likes of Axial’s SCX10 III with 2-speed transmission and DIG (disengages drive to the rear, then locks the rear, for tight turning and improved rock crawling ability) and the Traxxas TRX4 with its remotely activated locking diffs.

41,300.00 Read more

JLB J3 Speed

JLB Racing J3 SPEED is a marvelous 1: 10 scale off-road RC truggy that can bring you the unprecedented sensation of driving at over 100km/h. This is because the 4000mAh 30C LiPo battery can discharge at up to 120A, which can take full advantage of the HOBBYWING 120A ESC and make the motor rotate furiously.

41,300.00 Read more

DC 48V 350W BM1418ZXF brushless motor, electric bicycle kit, DIY E-Tricycle

Features

  • Model: BM1412ZXF
  • Rated Output Power -1500W
  • Rated Voltage – 48V DC
  • Speed after Reduction – 555 RPM
  • Rated Speed – 3000 RPM
  • Gear Ratio – 1:5.4
  • Full Load Current – 26.2/21.10A
40,304.08 Add to cart

DC 60V 3000W BM1412 brushless motor, electric bicycle kit

Features:-

  • Model: BM1424ZXF.
  • Rated Output Power: 3000W.
  • Rated Voltage: 60V DC.
  • Speed after Reduction: 570 RPM.
  • Rated Speed: 2850 RPM.
  • Gear Ratio: 1:5.
  • Full Load Current: 46/38A.
  • No Load Current: 6.50/6.0A.
  • Rated Torque: 49 N.m.
  • Application: Medium & Heavy Load size E-Tricycle.
  • Load weight: around 2000KG.
40,120.00 Add to cart

RGT 1/10 Scale RC4 Jimny Rock Cruiser V3 – RTR

Based on the RC4 V2 platform, this all new fantastic Rock Crawler from HSP/RGT has incorporated a complete re-design and has upgraded parts from the predecessor V2 models in the V3 version resulting in the Rock Cruiser RC4 V3 offering significantly improved Off-Road 4WD capabilities with greater performance.  This is further to the already extensive feature list; such as the integrated chassis rail, the steel solid link, all bearing, precise universal transmission and adjustable oil shock to name a few.

37,760.00 Read more

WLTOYS 104020 RC Rock Crawler 1/10 4WD

WLTOYS 104020 RC Rock Crawler 1/10 4WD

WLTOYS 104020 RC Crawler — Perfectly engineered for both newcomers and seasoned RC enthusiasts, this 1/10 scale electric 4WD rock crawler combines advanced technology with rugged durability, offering a realistic and thrilling driving experience.

35,400.00 Add to cart

Rlaarlo Omni RZ001B-C Carbon Fiber 1:10 Scale RTR Brushless Monster Truck

Description

  • Geometric Structural Design: The world’s first small-scale central differential structure, providing a responsive feel even in a small scale. The fully enclosed triangular support frame and support plate of the central differential form a triangular structure
  • Better vehicle control: The Carbon Fiber Version of the RZ001 is equipped with a GYROSCOPE, which significantly improves stability and control performance, allowing for better vehicle control and a higher level of driving experience
  • Chromium Steel Spiral Gears: The helical gear’s helical gear face design provides smooth, high-torque, low-noise, high-efficiency transmission with good abrasion resistance, making it suitable for scenarios that require high transmission performance and reliability.
  • Dual Specification Battery Compartment Design, Accommodating a 3s-5000mAh large battery for extended runtime without the need for frequent battery changes.
  • With a strong body structure and enlarged gearing, you can hit high speeds in virtually any environment – off-road, dirt and grass, parking lots, and paved and asphalt surfaces.
  • Equipped with a center differential structure for enhanced maneuverability and full-throttle freedom over rough terrain, slick surfaces and loose dirt
31,860.00 Add to cart

MJX Hyper Go 10208 V2 Version RC Monster Truck 1:10 Scale 80km/h 4WD RC Car

MJX Hyper Go 10208 V2 Version Monster RC Truck 1:10 Scale 80km/h 4WD RC Car

MJX Hyper Go10208 1/10 Scale Model Car: Achieve speeds of 60km/h with a 3S battery and 80km/h with a 4S battery. Equipped with an independent receiver, it offers a remote control range of up to 120 meters. Featuring a 35KG metal servo, a 3970 2500KV brushless motor with a cooling system, and a chrome steel 100A independent brushless ESC compatible with 2-3S batteries. The ESC parameters can be adjusted via an app for customized performance.

31,270.00 Read more

GOOSKY Legend S1 RC Helicopter Dual Brushless Motor Direct-Drive BNF/RTF Helicopter iit

GOOSKY S1 RTF version comes with a remote control. Mode 1 and mode 2 are available. Please note the mode when placing an order. If there is no note, we default to delivery mode 1.
The GOOSKY S1 is a small, game-changing, high-performance, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring unmatched flying fun and excitement. GOOSKY S1 boasts a whole host of features including dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique “cage body” metal geared servo system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the designers in producing a tough, easy-to-fly, maintenance-free, high-performance helicopter suitable for entry-level and experienced pilots alike.
This GOOSKY S1 RTF (Ready-to-Fly) version of the Legend S1 is supplied not only with the servos, flight controller, 2 batteries, and charger, but a dedicated, simple-to-use GOOSKY T8 transmitter as well. This transmitter is squarely aimed at the beginner, no complicated computer programming, basically just switch on and fly, but it is also perfect for the more experienced pilot who just wants to get flying quickly and easily. The transmitter is Mode 1, meaning that the throttle and left/right cyclic are on the right stick, and forward/aft cyclic, and tail rotor are on the left stick. The T8 also includes its own 3.7V 18650 2800mAh battery which is easily charged via the Type-C USB port in the side of the transmitter. The included GTS flight controller system utilizes new frame algorithmic technology for precision control with two flight modes. Flight mode 1 (switchable from the Tx) is self-stabilization that offers amazing stability for the beginner, and flight mode 2 allows for high-performance aerobatics and full 3D flight. The parameters of this system such as gyro settings, control throws, pitch, and head speeds are fully adjustable via the GOOSKY mobile phone APP and the supplied Bluetooth module, what could be simpler.

*This incredible GOOSKY S1 helicopter is a must-have for all RC pilots, GOOSKY S1 comes out of the box ready to fly, you just need to charge one of the batteries and away you go. If you need to change the default settings, then this is quick and simple via the GOOSKY S1 APP. The most important thing to remember is, the GOOSKY S1 is exciting, and great fun to fly, so get out there and enjoy this stunning little GOOSKY S1 helicopter.

30,680.00 Read more

Creality 3D Ender-3 V-slot Prusa I3 DIY 3D Printer Kit 220x220x250mm Printing Size With Power Resume Function/MK10 Extruder 1.75mm 0.4mm Nozzle

Features

  1. Modeling Technology – FDM(Fused Deposition Modeling).
  2. Printing Size – 220*220*250mm.
  3. Machine Size – 440*410*465mm.
  4. Net Weight – 8KG.
  5. Printing Speed – 180mm/s.
  6. Filament – 1.75mmPLA, TPU, ABS.
  7. Power Supply – 100-265V 50-60HZ.
  8. Output – 24V 15A 360W.
  9. Layer Thickness – 0.1-0.4mm.
  10. Nozzle Diameter – 0.4mm.
29,500.00 Read more

Creality 3D Ender-5 DIY 3D Printer Kit 220*220*300mm Printing Size

Features:-

  • Moulding Technology: FDM.
  • Print Dimensions: 220*220*300mm.
  • Print Speed: <180mm/s, Normal Printing Speed 40-80 mm/s.
  • Print Accuracy: + – 0.1mm.
  • Layers Thickness: 0.1-0.4mm.
  • Nozzle Diameter: Standard 0.4mm. Convertible 0.2, 0.3mm.
  • Nozzle Quantity: 1.
  • Nozzle Temperature: <260 Degree C
  • Hot Bed Temperature: <135 Degree C
  • Working Modes: Online or TF Cards are printed offline.
  • File Formats: STL, ODJ, AMF.
  • Slicing Software: Cura, Repeti-Host, Simlify 3d.
  • Power Parameters: Input:110v/220v. 50/60Hz. Output: DC 24V.
  • Machine Power: 270W.
27,730.00 Read more

Creality 3D Ender-3 Pro V-slot Prusa I3 DIY 3D Printer 220x220x250mm Printing Size With Magnetic Removable Platform Sticker/Power Resume Function/Off-line Print

Features

  1. Modelling technology: FDM ( Fused Deposition Modelling)
  2. Printing size: 220 x 220 x 250 mm
  3. Machine size: 440 x 410 x 465 mm
  4. Max traveling speed: 180mm / s
  5. Filament: 1.75 mm PLA, TPU, ABS, Gradient color, carbon fiber, etc.
  6. Input: AC 100 – 265V, 50 – 60Hz
  7. Output: DC 24V, 15 A, 360W
  8. Layer thickness: 0.1 – 0.4 mm
  9. Nozzle diameter: 0.4 mm
  10. Precision: ±0.1 mm.
27,140.00 Read more

TEVO Tarantula I3 Aluminium Extrusion 3D Printer kit printer 3d printing

Features:

  • Layer resolution of 50 microns.
  • MAX Printing Speed: 150 mm/s.
  • Build size: 200X 200 X 200mm.
  • Full Metal Bowden Extruder.
  • Material type: PLA, ABS, PETG, Wood, PVA and Flexible Filaments (With Pro Metal Extruder).
  • Material specifications 1.75mm in diameter.
  • Positioning accuracy: Z 0.04mm, XY 0.012mm.
  • Printing Color: Single color.
  • Nozzle diameter: 0.4mm.
  • Recommended extruder temperature: 210°C (the maximum can be set to 260°C).
  • Heating plate temperature: 60-120°C (proper winter warming and summer appropriate cooling).
  • Best ambient temperature: +/-25°C.
  • Power requirements: 220V, 250W, 50Hz, 0.89A.
27,140.00 Add to cart

Volantex RC Phoenix 2400 6 channel Glider with 2400 mm wings 759-3 PNP

Volantex RC Phoenix 2400 6-CH Glider with 2400 mm wings 759-3 PNP
Glider in the PNP version, the set includes the model, engine, regulator and servos. You need to buy a battery, charger, transmitter and receiver on your own.

Key Features:

– The 2.4M wingspan provides stable performance and makes you enjoy long glider flights. – A rugged plastic hull provides flexibility and durability to prevent aircraft damage.
– The model has been equipped with a wheel to facilitate landing.
– Engine size 4023 / 1050KV
– Model 6 CH version

24,957.00 Read more

Prusa i3 RepRap 3D Printer DIY Kit (Unassembled)

Features

  1. UPGRADED ENDER 3
  2. EASY TO ASSEMBLE
  3. SAFETY PROTECTED POWER SUPPLY
  4. ADVANCE TECHNOLOGY
  5. RESUME PRINT
22,420.00 Read more

Prusa i3 3d Printer DIY Kit Aluminium Structure ( Unassembled )

Fully Assembled RAMPS Board (RAMPS-35 volts + AT Mega + 5*A4988 Polulo Stepper Drivers) with FAN MOUNTS for cooling RAMPS3 x Mechanical End Stops01 x Mk 2 Heated Bed5 x NEMA 17 Motors ( Brand -Kysan 1124090 – 5.5 N.cm Torque)12V ATX Power Supply Unit (Brand – Intex) – Modified to be plug and play.All wires and connectorsAdditional cooling fans with mounts. All Steel & threaded rods for X, Y & Z (We use high precision Carbon Steel Rods for Smooth Rods, these rods do not have any lag in the linear bearings LM8UU due to this the printing performance increases greatly). We request all our customers to make sure that smooth rods have no lag with the linear bearings (if they purchase from other sources)

22,418.82 Read more

FMS RC Car 1/12 Scale Suzuki Jimny 4WD Crawler RTR

FMS RC Car provides an amazing appearance design and an outstanding car light system that can be activated remotely. It is built with precision and conveniently located parts

21,830.00 Read more

DC 48V 1500W BM1418ZXF brushless motor, electric bicycle kit

Features:-

  • Model: BM1412ZXF.
  • Rated Output Power: 1500W.
  • Rated Voltage: 48V DC.
  • Speed after Reduction: 555 RPM.
  • Rated Speed: 3000 RPM.
  • Gear Ratio: 1:5.4.
  • Full Load Current: 2/21.10A.
  • No Load Current: 4.50/4.0A.
  • Rated Torque: 60 N.m.
  • Application: Small and Medium size E-Tricycle.
  • Load weight: around 1000Kg.
21,830.00 Add to cart

1/12 Metal Brushless 4WD RTR Buggy X12S

With a 2845-3600KV brushless motor and 45A ESC, the X12S delivers 3S brushless power straight out of the box—no costly upgrades needed for speeds up to 60-90KMH

This brushless buggy comes ready out of the box to bash and blast on any terrain including a 3S (11.1V 2200 mAh) battery. A bag of spares and accessories is also included in the box for you.

Crafted from 1.2mm PC material, featuring bright, unique color schemes with two stunning options. Includes a wing for added downforce, designed in a off-road racing style.

X12S chassis and shock towers are made from high-strength aluminum alloy, offering excellent durability and resistance to deformation, ensuring stability and performance on any terrain.

Easily limit the max speed to 50% or 75% to help you to safely learn control skills until you’re ready for full power.

20,650.00 Add to cart

Rlaarlo Metal 1/14 Scale Brushless RTR Monster Truck, ROG1

  • Gladiator ROG1 is a compact Monster Truck at 1/14 scale perfect for enthusiasts of all levels. Its small size fits easily in a backpack, so you can enjoy fun anytime, anywhere.
  • With a top speed of 100 km/h, it’s ideal for speed seekers. The adjustable throttle allows beginners to practice control at lower speeds.
  • Gladiator’s strong power not only allows standing backflips but also has excellent rollover capability. After a rollover, you don’t need to pick up the car manually, just rock the car using short throttle bursts and it will automatically return to an upright position, saving you the trouble of picking up the car
  • The car shell features a vibrant color painting with simulated decorations, crafted from 1.2mm PC material. The front, roof, and rear are equipped with black nylon guards, providing extra protection.
20,650.00 Add to cart

UDI RC 0005 – Arrow RC Boat 50kmph

UDI005 Brushless Muscleboat!
50km/h on 3s LiPo all-out! ARROW means business with its super-rigid, 25-inch deep-V hull, smooth, cable-drive efficiency, innovative water cooling system, and precision drive controls. The clean, modern hull design is built up in layers for maximum rigidity and its bold color makes a statement on the water.

20,650.00 Add to cart

Creality Children CR-100 3d printer 100*100*80mm Printing Size 1.75mm 0.4mm Nozzle Support

Features:-

  • Brand: CREALITY 3D
  • Model: CR-100
  • Technology: FDM
  • Type: Material extrusion
  • Printing Size: 100*100*80mm.
  • Machine Size: 241*183*255mm.
  • Package Size: 250*230*340mm.
  • N.W: 2.8Kg.
  • G.W: 3.9Kg.
  • Colour : Red
  • Printing Method: FDM.
  • Number of Nozzle: 1pcs.
  • Slice Thickness: 0.1mm-0.4mm.
  • Filament Diameter: 1.75mm.
20,296.00 Add to cart

Creality Children CR-100 3d printer 100*100*80mm Printing Size 1.75mm 0.4mm Nozzle Support

This Creality Children CR-100 3d printer 100*100*80mm designed extremely as an innovative design, integrating classic elements, for beginners and children. This 3D printer is capable of providing more consistent, good-quality prints. Using a single extruder type with FDM technology, it offers a total size is 241 x 183 x 255 mm and its build volume is 100 x 100 x 80 mm. Thereby saves space with a small build size. This printer comes with a nozzle diameter of 0.4mm and a filament diameter of 1.75mm.

20,296.00 Read more

MJX 14210 V3 1/14 Hyper Go 4WD RTR

Features:
1. Metal hydraulic shock absorber;
2. Standard 2S battery 55km/h
3. 45A independent brushless ESC with cooling fan
4. 2852 4400kv four-pole brushless motor;
5. Chrome steel gear differential, chrome steel + powder metallurgy gear, metal chassis
6. All-metal transmission system (steel metal gear differential);

20,060.00 Read more

1610 DIY Mini 3-Axis CNC Router Engraver Laser Engraving MachinePCB PVC Milling Wood Carving CNC Machine (unassembled)

Features:-

  • Control software: GRBL control.
  • Construction: Aluminium + plastic.
  • Working area: 160*100*40mm.
  • Frame size: 260*240*220mm.
  • Stepper motor: 12V, 1.3A, 2.1Ω, 0.25N.m
  • Spindle: 12-36V 7000r / min
  • Wire rod: T8.
  • Power Supply: 24V 5.6A (110V -240V).
  • Support System: Windows XP / Win 7 / Win 8 / Linux.
  • Standard: The complete set of the parts and tools.
  • Engraving materials: Plastic, wood, acrylic, PVC, PCB and other soft materials.
  • Laser tube: 500mw.
  • Weight: 5.5KG.
20,060.00 Add to cart

Easythreed NANO Fully Assembled Mini 3D Printer for Household Education & Students 90*110*110mm Printing Size Support One Key Printing

Features:-

  • Print Technology: FDM
  • Product Colour: White
  • Print Size: 90*110*110mm
  • Number of Nozzle: 1
  • Nozzle Diameter:.4mm
  • Layer Thickness: 0.1-0.3mm
  • Filament Support: PLA
  • Filament Size: 1.75mm
  • Rotary technology: Belt drive, linear bearing technology
  • Print accuracy: 0.1-0.3mm
  • Support hotbed: No
  • Slicing software: E3D NANO
  • Feed Technology: Proximal feed.
20,060.00 Add to cart